Konica FC-1

The Konica FC-1 was introduced in 1980 by Konica, one year after the FS-1, but does not have the integrated winder. It was manufactured until 1983. Both models were only available in a black finish.[1][2] With top covers made from black plastic cast Konica had good experiences since the Autoreflex TC in the mid of the 70s.[3]

Konica FC-1
Overview
MakerKonishiroku
Type35 mm SLR
Lens
Lens mountKonica AR
Sensor/medium
Film speedISO 25 to 1600 [manual]
Focusing
FocusManual
Exposure/metering
ExposureShutter priority, manual
Exposure meteringEV0 to EV19 @ ASA 100
Flash
FlashHot shoe, PC socket
Flash synchronization1/100 s
Shutter
Frame rateManual lever winding, unmodified.
Shutter speed range2 s to 1/1000 s
General
Battery4SR44 6 V battery
Dimensions89 × 140 × 45 mm
Weight515 g
Made inJapan
The FS-1 (basis for the FC-1, 1979 presented)[1]

Like the FS-1 the FC-1 is a camera with shutter priority and so it has a aperture LED finder display. The shutter is a vertical metal focal plane shutter, like in the Konica F, the first Single-lens reflex camera by Konica in 1960. Shutter and mirror of the FC-1 are electronically controlled. The range of shutterspeeds starts at 1/1000 s and ends at 2s. The self-timer with LED electronically works, too; its delay is round about 10 s.[4] The camera has accessory terminal (use only for dedicated Konica accessories). The FC-1 does not have an on/off switch.

The film loading system of the FC-1 is noteworthy: The camera takes the film tip automatically and there is no need to fire the shutter until the first frame is reached.[2] It was named Autoload.[4] It is possible to use a separate winder, the "Auto Winder F".

Lenses are fixed with the Konica AR-bayonet.

This model was commonly paired with a Konica 40mm Hexanon AR F1.8 lens. The weight of this pancake lens, which has six lenses, is 140 g only. It got an excellent reputation.[5]

Accessories

The Konica flash X-24 was available as for the FS-1 and its successor Konica FT-1. As the name of this flash indicates it has a guide number of 24.[6] The apertures 5.6 or 11 are selectable with a switch at the X-24.[2] And with this flash the shutter speed is 1/100 s.[4] Furthermore a big and powerful, handle-mounted system electronic strobe with a guide number of 36 (metric) / 120 (feet) at ISO 100/21° was offered: the X-36 Auto. Its preselectable apertures are identical to the X-24[7]

Konica Radio Controller Set: This accessory came with an receiver and remote that can be distanced away from the receiver up to 230 feet (70 m) away. The receiver is attached by the tripod socket.

Lenses by Konica

Konica offered lenses with focus from 15 mm up to 2,000 mm; they were named Hexanon.[8] There was no low-cost or consumer line: All Konica lenses have good qualitiy and got a good reputation: this includes the mechanics and less variation between samples.[9]

  • Hexanon 3.5/28 mm
  • AR-mount (of the Hexanon 3.5/ 28 mm)
  • Zoom Hexanon 3.5/35-70 mm (and flash X-24)
  • telephoto 135 mm (mounted on a Konica Autoreflex TC)

References
  1. buhla.de, Konica FS-1. Retrieved 2020-11-04.
  2. buhla.de, Konica FC-1. Retrieved 2020-11-04.
  3. buhla.de, Konica Autoreflex TC 1976–1982. Retrieved 2020-11-07.
  4. buhla.de, Konica FC-1 1980–1983, Technical data and features. Retrieved 2020-11-04.
  5. altglas-container.de 16 December 2015, Konica Hexanon AR 40mm f1.8 (German), Retrieved 2020-11-04.
  6. buhla.de, Konica SLR accessories 1960–1987, X-24 Auto. Retrieved 6 November 2020.
  7. buhla.de, Accessories, X-36 Auto. Retrieved 5 November 2020.
  8. buhla.de, Konica SLR lenses 1960–1987. Retrieved 5 November 2020.
  9. konicafiles.com, Hexanon AR lenses, especially chapter above the last big picture. Retrieved 6 November 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.