Logarithmic resistor ladder

As in digital-to-analog converters, a binary word is applied to the ladder network, whose N bits are treated as representing an integer value according to the relation:

${\displaystyle \mathrm {CodeValue} =\sum _{i=1}^{N}s_{i}\cdot 2^{i-1}}$ where ${\displaystyle s_{i}}$ represents a value 0 or 1 depending on the state of the i^th switch.

For a conventional DAC or R-2R network, the output signal value (its voltage) would be:

${\displaystyle V_{out}=a\cdot (\mathrm {CodeValue} +b)\cdot V_{in}}$ where ${\displaystyle a}$ and ${\displaystyle b}$ are design constants and where ${\displaystyle V_{in}}$ typically is a constant reference voltage.

(DA-converters that are designed to handle a variable input voltage are termed multiplying DAC.[1])

In contrast, the logarithmic ladder network discussed in this article creates a behavior as:

${\displaystyle \log(V_{out}/V_{in})=a\cdot (\mathrm {CodeValue} +b)}$ where ${\displaystyle V_{in}}$ is a variable input signal.

This example circuit is composed of 4 stages, numbered 1 to 4, and an additional leading Rsource and trailing Rload.

Each stage i has a designed input-to-output voltage attenuation ratio_i as:

${\displaystyle Ratio_{i}={\text{if}}\;sw_{i}\;{\text{then}}\;\alpha ^{2^{i-1}}\;{\text{else}}\;1}$

For logarithmic scaled attenuators, it is common practice to express their attenuation in decibels:

${\displaystyle dB(Ratio_{i})=20\log _{10}\alpha ^{2^{i-1}}=2^{i-1}\cdot 20\cdot \log _{10}\alpha }$ for ${\displaystyle i=1..N}$ and ${\displaystyle sw_{i}=1}$

This reveals a basic property: ${\displaystyle dB(Ratio_{i+1})=2\cdot dB(Ratio_{i})}$

To show that this ${\displaystyle Ratio_{i}}$ satisfies the overall intention:

${\displaystyle \log(V_{out}/V_{in})=\log(\prod _{i=1}^{N}Ratio_{i})=\sum _{i=1}^{N}\log(Ratio_{i})=a\cdot (CodeValue+b)}$

for ${\displaystyle b=0}$ and ${\displaystyle a=\log(\alpha )}$

The different stages 1 .. N should function independently of each other, as to obtain 2^N different states with a composable behavior. To achieve an attenuation of each stage that is independent of its surrounding stages, either one of two design choices is to be implemented: constant input resistance or constant output resistance.

• The circuit as depicted above, can also be applied in reverse direction. That correspondingly reverses the role of constant-input and constant-output resistance equations.
• Since the stages do not influence each other's attenuation, the stage order can be chosen arbitrarily. Such reordering can have a significant effect on the input resistance of the constant output resistance attenuator and vice versa.

R-2R ladder networks used for Digital-to-Analog conversion are rather old. A historic description is in a patent[2] filed in 1955.

Multiplying DA-converters with logarithmic behavior were not known for a long time after that. An initial approach was to map the logarithmic code to a much longer code word, which could be applied to the classical (linear) R-2R based DA-converter. Lengthening the codeword is needed in that approach to achieve sufficient dynamic range. This approach was implemented in a device from Analog Devices Inc.,[3] protected through a 1981 patent filing.[4]

• Resistor ladder
• Digital-to-analog converter
• Attenuator circuits

• Online calculator to configure logarithmic ladder networks