Magnesium oxychloride

Magnesium oxychloride is the traditional term for several chemical compounds of magnesium, chlorine, oxygen, and hydrogen whose general formula xMgO·yMgCl
2
·zH
2
O
, for various values of x, y, and z; or, equivalently, Mg
x+y
(OH)
2x
Cl
2y
(H
2
O)
zx
. Other names for this class are magnesium chloride hydroxide,[1] magnesium hydroxychloride,[2] and basic magnesium chloride.[3] Some of these compounds are major components of Sorel cement.

Compounds

Phase diagram for the ternary system MgO – MgCl
2
H
2
O
at ~ 23 °C.[4] The stable oxychloride phases are P5 (Phase 5, 5:1:8) and P3 (phase 3, 3:1:8). The dark blue region is clear solution. The triple equilibrium points of the saturated solution are S1 (Sol:Mg(OH)
2
:P5)
, S2 (Sol:P5:P3), and S3 (Sol:P3:MgCl
2
·6H
2
O)
. The light blue region is the approximate range of compositions of homogeneous metastable gels.

The ternary diagram of the system MgOMgCl
2
H
2
O
has the following well-defined and stable phases:[4][5][6]

  • Mg(OH)
    2
    (magnesium hydroxide, the mineral brucite)
  • 2Mg(OH)
    2
    ·MgCl
    2
    ·4H
    2
    O
    = Mg
    3
    (OH)
    4
    Cl
    2
    ·4H
    2
    O
    ("phase 2", "2:1:4")
  • 3Mg(OH)
    2
    ·MgCl
    2
    ·8H
    2
    O
    = 2Mg
    2
    (OH)
    3
    Cl
    ·4H
    2
    O
    ("phase 3", "3:1:8")
  • 5Mg(OH)
    2
    ·MgCl
    2
    ·8H
    2
    O
    = 2Mg
    3
    (OH)
    5
    Cl
    ·4H
    2
    O
    ("Phase 5", "5:1:8")
  • 9Mg(OH)
    2
    ·MgCl
    2
    ·5H
    2
    O
    = Mg
    10
    (OH)
    18
    Cl
    2
    ·5H
    2
    O
    ("Phase 9", "9:1:5")
  • MgCl
    2
    ·6H
    2
    O
    (magnesium chloride hexahydrate)

Phase 3 and phase 5 may exist at ambient temperature, whereas the phase 2 and phase 9 are stable only at temperatures above 100 °C.[5] All these compounds are colorless crystalline solids.

At ambient temperature, there are also gel-like homogeneous phases that form initially when the reagents are mixed, and eventually crystallize as phase 5, phase 3, or mixtures with Mg(OH)
2
or MgCl
2
·6H
2
O
.[4]

There are also other lower hydrates that can be obtained by heating the "natural" phases:[7]

  • 2Mg(OH)
    2
    ·MgCl
    2
    ·2H
    2
    O
    (phase 2 dihydrate; ~230 °C)
  • 3Mg(OH)
    2
    ·MgCl
    2
    ·5H
    2
    O
    (phase 3 pentahydrate; ~110 °C)
  • 3Mg(OH)
    2
    ·MgCl
    2
    ·4H
    2
    O
    (phase 3 tetrahydrate; ~140 °C)
  • 5Mg(OH)
    2
    ·MgCl
    2
    ·4H
    2
    O
    (phase 5 tetrahydrate; ~120 °C)
  • 5Mg(OH)
    2
    ·MgCl
    2
    ·3H
    2
    O
    (phase 5 trihydrate; ~150 °C)
  • 9Mg(OH)
    2
    ·MgCl
    2
    ·2H
    2
    O
    (phase 9 dihydrate; ~190 °C)

In addition, a heptahydrate of phase 5, 5Mg(OH)
2
·MgCl
2
·7H
2
O
, can be obtained by washing the natural octahydrate with ethanol.[7]

All four stable phases have anhydrous versions, such as 3Mg(OH)
2
·MgCl
2
(anhydrous phase 3) and 5Mg(OH)
2
·MgCl
2
(anhydrous phase 5), with the crystal structure of Mg(OH)
2
. They can be obtained by heating them to about 230 °C (phases 3 and 5) about 320 °C (phase 2), and about 260 °C (phase 9).[7]

History

These compounds are the primary components of matured magnesia cement, invented in 1867 by the French chemist Stanislas Sorel.[8]

In the late 19th century, several attempts were made to determine the composition of set Sorel's cement, but the results were not conclusive.[9][10][11][12] Phase 3 was properly isolated and described by Robinson and Waggaman in 1909,[9] and phase 5 was identified by Lukens in 1932.[13]

Properties

Solubility

The oxychlorides are only very slightly soluble in water.[14]

In the system MgO – MgCl
2
H
2
O
at about 23 °C, the completely liquid region has vertices at the following triple equilibrium points (as mass fractions, not molar fractions):[4]

S1 = 0.008 MgO + 0.170 MgCl
2
+ 0.822 H
2
O
(Sol:Mg(OH)
2
:P5)
S2 = 0.010 MgO + 0.222 MgCl
2
+ 0.768 H
2
O
(Sol:P5:P3)
S3 = 0.012 MgO + 0.345 MgCl
2
+ 0.643 H
2
O
(Sol:P3:MgCl
2
·6H
2
O
)

The other vertices are pure water, magnesium chloride hexahydrate, and the saturated Mg(OH)
2
solution (0.0044 MgO + 0.9956 H
2
O
by mass).[4]

Decomposition and degradation

The anhydrous forms decompose when heated above 450-500 °C by decomposition of the hydroxide and chloride anions, releasing water and hydrogen chloride and leaving a magnesium oxide residue, by the reactions:[7]

2HO
O2−
+ H
2
O
H
2
O
+ 2Cl
O2−
+ 2HCl

Extended exposure of magnesium oxychlorides to water leaches out the soluble MgCl
2
, leaving hydrated brucite Mg(OH)
2
.[15]

On exposure to the atmosphere, the oxychlorides will slowly react with carbon dioxide CO
2
from the air to form magnesium chlorocarbonates. Anhydrous and partially hydrated forms also absorb water, turning into phase 5 and then phase 3 on the way to the chlorocarbonate. The exceptions are the dihydrate and hexahydrate of phase 9, that remain unchanged for many months.[7]

Structure

The crystal structure of phase 3 is triclinic with space group and z = 2.[16] The solid consists polymeric aquohydroxo cations, in the form of double chains of magnesium atoms surrounded and bridged by the oxygen atoms in hydroxy groups and complexed water molecules. These linear cations are interleaved and neutralized by chloride anions and some unbound water molecules, yielding the general formula [(Mg
2
(OH)
3
(H
2
O)
3
)
n
]n+ ·nCl
· nH
2
O
.[17][16][7]

The structure of phase 5 is believed to be similar, with generic formula [(Mg
3
(OH)
5
(H
2
O)
x
)
n
]n+·nCl
· n(4-x)H
2
O
.[17]

The anhydrous forms of phase 3 and phase 5 have the same structure as Mg(OH)
2
: namely, layers of magnesium cations, each sandwiched between two layers of hydroxy or chloride anions.[7]

Phase 5 crystals form as long needles consisting of rolled-up sheets.[18]

The Raman spectrum of phase 3 has peaks at 3639 and 3657 cm−1, whereas phase 5 has peaks at 3608 and 3691 cm−1, and brucite has a peak at 3650 cm−1. These peaks are attributed to stretching vibrations of the OH groups. Phase 3 has also a peak at 451 cm−1, attributed to the stretching of Mg–O bonds.[6][16]

Preparation

From MgO or Mg(OH)
2
and MgCl
2

Phases 3 and 5 can be prepared by mixing powdered magnesium oxide MgO with a solution of magnesium chloride MgCl
2
in water H
2
O
, in molar ratios 3:1:11 and 5:1:13, respectively, at room temperature. This is the common method of preparing Sorel magnesia cement.[16] Magnesium hydroxide Mg(OH)
2
can also be used instead of the oxide, with adjusted amount of water.

For best results, the magnesium oxide should have small particle size and large surface area. It can be prepared by calcination of magnesium hydroxycarbonate Mg
5
(OH)
2
(CO
3
)
4
·4H
2
O
at about 600 °C. Higher temperatures increase particle size leading to slower reaction rate.[19]

It is believed that, during the reaction, the magnesium oxide is continuously hydrated and dissolved, helped by the slightly acidic character of the magnesium chloride solution.[17] The acidity is attributed to hydrolysis of the magnesium hexahydrate cations:

[Mg(H
2
O)
6
]2+
[Mg(OH)(H
2
O)
5
]+
+ H+

The protons (which are actually hydrated, e.g. as H
3
O+
) make the solution acidic; the pH varies from 6.5 to 4.7 as the concentration of MgCl
2
increases from 30% to 70% (weight basis).[17] The protons then react with and dissolve the nearly insoluble oxide or hydroxide, by such reactions as[17]

MgO + 2H+
+ 5H
2
O
[Mg(H
2
O)
6
]2+
Mg(OH)
2
+ H+
+ 4H
2
O
[Mg(OH)(H
2
O)
5
]+

The ions [Mg(H
2
O)
6
]2+
and [Mg(OH)(H
2
O)
5
]+
in solution then combine into complex cations with multiple magnesium atoms, bridged by hydroxide anions and water molecules (magnesium aquohydroxo complexes), with general formula [Mg
x
(OH)
y
(H
2
O)
z
](2xy)+.[17] This process involves additional hydrolysis, turning some H
2
O
ligands into OH
and freeing more H+
, which keeps dissolving more oxide. With enough magnesium chloride, the dissolution of the oxide is relatively fast, and a clear solution of magnesium aquohydroxo cations can be obtained by filtration.[13][12]

Over a period of several hours, those cations keep combining into larger complexes, becoming less soluble as they grow. After a few hours (at room temperature), those cations and the chloride anions precipitate as (or turn the solution into) a hydrogel, which then gradually crystallizes into a mixture of phase 3, phase 5, solid magnesium oxide and/or chloride, and/or some residual solution.[17] Depending on the proportion of the reagents, phase 5 may form at first, but then will react with excess chloride to form phase 3.[16]

The magnesium oxide can also react with water to form the hydroxide, which, being poorly soluble, would coat the oxide grains and stop further hydration. The acidity provided by hydrolysis of the cations in solution dissolves this coating, and thus allows the process to run continuously until one of the reagents is exhausted.[17]

From MgO or Mg(OH)
2
and HCl

The compounds can also be prepared from magnesium oxide or hydroxide and hydrochloric acid. The MgOH
2
O
MgCl
2
phase diagram is contained in the MgOH
2
O
HCl diagram.[4]

From MgCl
2
and NaOH

The difficulties of preparing the magnesium oxide and ensuring its full reaction can be avoided by using NaOH instead of MgO or Mg(OH)
2
, so that all reagents are solutions. However, sodium chloride NaCl may also precipitate for certain concentrations of the reagents.

With this route, stable phase 5 precipitates in a rather narrow range of conditions, namely when the concentration [Cl] of chloride anions in solution is 2.02 ± 0.03 mol/L, the concentration [Mg] of magnesium (as Mg2+
and other cations) is 1.78 ± 0.07 mol/L, and the pH is 7.65 ± 0.05. Stable phase 3 precipitates in a broader range of cases, namely when [Cl] is 6.48 ± 2.17 mol/L, [Mg] is 3.14 ± 1.12 mol/L, and the pH is 6.26 ± 0.14[14][19]

Other

A short note from 1872 reported the formation a solid with approximate formula 5MgO·MgCl
2
·13H
2
O
, as a mass of fine needles, from a solution of magnesium ammonium chloride Mg(NH
4
)Cl
3
with excess ammonia left standing for several months.[10]

G. André claimed in 1882 the preparation of anhydrous oxychlorides by fusing anhydrous magnesium chloride with powdered magnesium oxide.[12]

References

  1. Yongliang Xiong, Haoran Deng, Martin Nemer, and Shelly Johnsen (2010): "Experimental determination of the solubility constant for magnesium chloride hydroxide hydrate (Mg
    3
    Cl(OH)
    5
    ·4H
    2
    O
    , phase 5) at room temperature, and its importance to nuclear waste isolation in geological repositories in salt formations". Geochimica et Cosmochimica Acta, volume 74, issue 16, pages 4605–4611. doi:10.1016/j.gca.2010.05.029
  2. Bodine, M. W. Jr. (1976): "Magnesium hydroxychloride: A possible pH buffer in marine evaporite brines?" Geology, volume 4, issue 2, pages 76-80. doi:10.1130/0091-7613(1976)4<76:MHAPPB>2.0.CO;2
  3. JianSong Wu, YingKai Xiao, JingYun Su, TingTing Deng, JieRong Feng, YuYing Mo, and Mei Zeng (2011): "The growth mechanism of the basic magnesium chloride whisker". Science China Technological Sciences, volume 54, issue 3, pages 682–690. doi:10.1007/s11431-011-4300-9
  4. Ladawan Urwongse and Charles A, Sorrell (1980): "The System MgO‐MgCl2‐H2O at 23°C". Journal of the American Ceramic Society, volume 63, issue 9-10, pages 501-504. doi:10.1111/j.1151-2916.1980.tb10752.x
  5. Zongjin Li and C. K. Chau (2007): "Influence of molar ratios on properties of magnesium oxychloride cement". Cement and Concrete Research, volume 37, issue 6, pages 866-870. doi:10.1016/j.cemconres.2007.03.015
  6. Ronan M. Dorrepaal and Aoife A. Gowen (2018): "Identification of Magnesium Oxychloride Cement Biomaterial Heterogeneity using Raman Chemical Mapping and NIR Hyperspectral Chemical Imaging". Scientific Reports, volume 8, article number 13034. doi:10.1038/s41598-018-31379-5
  7. W. F. Cole and T. Demediuk (1955): "X-Ray, thermal, and Dehydration studies on Magnesium oxychlorides". Australian Journal of Chemistry, volume 8, issue 2, pages 234-251. doi:10.1071/CH9550234
  8. Stanislas Sorel (1867): "Sur un nouveau ciment magnesién". Comptes rendus hebdomadaires des séances de l'Académie des sciences, volume 65, pages 102–104.
  9. W. O. Robinson and W. H. Waggaman (1909): "Basic magnesium chlorides". Journal of Physical Chemistry, volume 13, issue 9, pages 673–678. doi:10.1021/j150108a002
  10. J. W. C. Davis (1872): "Composition of Crystalline Deposit from a Solution of Magnesium and Ammonium Chloride". The Chemical News and Journal of Physical Science, volume 25, page 258.
  11. Otto Krause (1873): "Ueber Magnesiumoxychlorid". Annalen der Chemie und Pharmacie, volume 165, pages 38–44.
  12. G. M. André (1882): "Sur les oxychlorures de magnésium". Comptes rendus hebdomadaires des séances de l'Académie des sciences, volume 94, pages 444–446.
  13. H. S. Lukens (1932): "The composition of magnesium oxychloride". Journal of the American Chemical Society, volume 54, issue 6, pages 2372–2380. doi:10.1021/ja01345a026
  14. Carmen Mažuranić, Halka Bilinski, and Boris Matković (1982): "Reaction Products in the System MgCl
    2
    ‐NaOH‐H
    2
    O
    ". Journal of the American Ceramic Society, volume 65, issue 10, pages 523-526. doi:10.1111/j.1151-2916.1982.tb10346.x
  15. Amal Brichni, Halim Hammi, Salima Aggoun, and M'nif Adel (2016): "Optimization of magnesium oxychloride cement properties by silica glass". Advances in Cement Research (Springer conference proceedings). doi:10.1680/jadcr.16.00024
  16. Isao Kanesaka and Shin Aoyama (2001): "Vibrational spectra of magnesia cement, phase 3". Journal of Raman Spectroscopy, volume 32, issue 5, pages 361-367. doi:10.1002/jrs.706
  17. Deng Dehua and Zhang Chuanmei (1999): "The formation mechanism of the hydrate phases in magnesium oxychloride cement". Cement and Concrete Research, volume 29, issue 9, pages 1365-1371. doi:10.1016/S0008-8846(98)00247-6
  18. B. Tooper and L. Cartz (1966): "Structure and Formation of Magnesium Oxychloride Sorel Cements". Nature, volume 211, pages 64–66. doi:10.1038/211064a0
  19. Halka Bilinski, Boris Matković, Carmen Mažuranić, and Toncci Balić Žunić (1984): "The Formation of Magnesium Oxychloride Phases in the Systems MgO‐MgCl
    2
    H
    2
    O
    and NaOH‐MgCl
    2
    H
    2
    O
    ". Journal of the American Ceramic Society, volume 67, issue 4, pages 266-269. doi:10.1111/j.1151-2916.1984.tb18844.x
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.