NeXTcube Turbo

The NeXTcube Turbo was a high-end workstation computer developed, manufactured and sold by NeXT. It superseded the earlier NeXTcube workstation and was housed in the same cube-shaped magnesium enclosure. The workstation ran the NeXTSTEP operating system.

ManufacturerNeXT
TypeWorkstation
Release dateApril 7, 1992 (1992-04-07)[1]
Operating systemNeXTSTEP, OPENSTEP, NetBSD (limited support)
CPUMotorola 68040 @ 33 MHz, 56001 digital signal processor (DSP)
Memory16–128 MB
Display1120×832 2-bpp grayscale
Dimensions1-foot (305 mm) die-cast magnesium cube-shaped case
PredecessorNeXTcube

Hardware

The NeXTcube Turbo was a development of the earlier NeXTcube. It differed from its predecessor in having a 33 MHz 68040 processor.

The NeXTdimension board could also be used in the NeXTcube Turbo.

There was also a very rare accelerator board known as the Nitro; between 5 and 20 are estimated to have been made. It increased the speed of a NeXTcube Turbo by replacing the standard 33 MHz processor with a 40 MHz one.[2]

Specifications

  • Display: 1120×832 17" grayscale MegaPixel Display
  • Operating System: NeXTSTEP, OPENSTEP
  • CPU: 33 MHz 68040 with integrated floating-point unit
  • Digital Signal Processor: 25 MHz Motorola DSP56001
  • RAM: 16 MB, expandable to 128 MB (Four 72-pin SIMM slots)
  • Floppy Drive: 2.88 MB (optional)
  • Hard Drive: 400 MB, 1.4 GB or 2.8 GB SCSI drive
  • Expansion: four NeXTbus slots (mainboard uses one slot)
  • Size (H × W × D): 12" × 12" × 12"[3]

See also

References

  1. NeXT Press release, ...NeXT Ships its "Turbo" NeXTcube On Time...April 7, 1992 - NeXT Computer, Inc.....has begun shipments...NeXTcube Turbo workstation.
  2. NeXT Nitro Information Archived April 24, 1999, at the Wayback Machine
  3. NeXTcube brochure
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.