Nutmeg 24

The Nutmeg 24 is a Canadian sailboat, that was designed by William Shaw and first built in 1964. The design is out of production.[1][2]

Nutmeg 24
Development
DesignerWilliam Shaw
LocationCanada
Year1964
Builder(s)Tanzer Industries
Boat
CrewTwo
Draft5.25 ft (1.60 m)
Hull
TypeMasthead sloop
ConstructionFiberglass
LOA24.50 ft (7.47 m)
LWL18.50 ft (5.64 m)
Beam7.58 ft (2.31 m)
Hull appendages
Keel/board typefixed fin keel
Sails
Mainsail area142.31 sq ft (13.221 m2)
Jib/genoa area125.83 sq ft (11.690 m2)
Total sail area268.14 sq ft (24.911 m2)

The Nutmeg 24 was featured in the July 1964 issue of Popular Boating.[1]

Production

Production of the boat was commenced in 1964 by Tanzer Industries of Dorion, Quebec. The company entered bankruptcy in May 1986 and production had ended by then.[1][3]

Hughes Boat Works of Canada later produced a derivative design, the Hughes 24.[1]

Design

The Nutmeg 24 is based on the earlier Oriental Mercy design of 1955 and also the Shaw 24, both wooden boats.[1]

The Nutmeg 24 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, an internally mounted rudder. It displaces 3,800 lb (1,724 kg) and carries 1,475 lb (669 kg) of lead ballast.[1][2]

The boat has a long keel, with a retractable centreboard, that gives a draft of 5.25 ft (1.60 m) with the board down and 2.75 ft (0.84 m) with it retracted.[1][2]

The boat has a hull speed of 5.76 kn (10.67 km/h).[2]

See also

Similar sailboats

References

  1. Browning, Randy (2016). "Nutmeg 24 sailboat specifications and details". sailboatdata.com. Retrieved 7 July 2016.
  2. InterVisionSoft LLC (2016). "Sailboat Specifications for Nutmeg 24". Sailing Joy. Retrieved 7 July 2016.
  3. Browning, Randy (2016). "Tanzer Industries Ltd, 1966–1986". sailboatdata.com. Retrieved 7 July 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.