Palestine grid

The British Mandate Palestine grid (Arabic: التربيع الفلسطيني) was the geographic coordinate system used by the Survey Department of Palestine.

The British Mandate Palestine grid

The system was chosen by the Survey Department of the Government of Palestine in 1922.[1] The projection used was the Cassini-Soldner projection. The central meridian (the line of longitude along which there is no local distortion) was chosen as that passing through a marker on the hill of Mar Elias Monastery south of Jerusalem.[1] The false origin (zero point) of the grid was placed 100 km to the south and west of the Ali el-Muntar hill that overlooks Gaza city.[1] The unit length for the grid was the kilometre; the British units were not even considered.[1]

At the time the grid was established, there was no intention of mapping the lower reaches of the Negev Desert, but this did not remain true.[1] The fact that those southern regions would have negative north-south coordinate then became a source of confusion, which was solved by adding 1000 to the northern coordinate in that case.[1] For some military purposes, 1000 was added to the north-south coordinates of all locations, so that they then ranged uniformly from about 900 to about 1300.[1]

Portion of 1941 military map showing intersection of Palestine (blue) and Levant (black) grids near Majdal Shams

During World War II, a Military Palestine Grid was used that was similar to the Palestine Grid but used the transverse Mercator projection.[2] The difference between the two projections was only a few meters.[2]

After the establishment of the State of Israel, the Palestine grid continued to be used under the name of the Israel Grid or the Israeli Cassini Soldner (ICS) grid, now called the "Old Israeli Grid", with 1000km added to the northing component to make the north-south range continuous. It was replaced by the Israeli Transverse Mercator grid in 1994. The Palestine grid is still commonly used to specify locations in the historical and archaeological literature.

Specifying locations

United Nations map showing the 1949 Armistice Agreements, with original map reference points ("MR") on the Palestine grid referenced in the respective agreements.

The basic way of specifying a location on the Palestine grid is to write the east-west coordinate followed by the north-south coordinate using 3 digits each. For example, the Dome of the Rock is at 172132. This specifies the location within one kilometer. If more precision is required, extra digits can be added to each coordinate; for example, 17241317 gives the Dome of the Rock to within 100 meters. Many authors separate the two coordinates with punctuation for readability purposes, for example 172-132 or 172/132.[3]

References

  1. Dov Gavish (2005). The Survey of Palestine under the British Mandate, 1920–1948. London and New York: RoutledgeCurzon. pp. 73–75.
  2. Dov Gavish (2005). The Survey of Palestine under the British Mandate, 1920–1948. London and New York: RoutledgeCurzon. pp. 219–223.
  3. For example, the location of Khirbet esh Sheik Mohammed is given as 1417.1984 in Denys R. Pringle (1986). The Red Tower (al-Burj al-ahmar): Settlement in the Plain of Sharon at the time of the Crusaders and the Mamluks A.D. 1099–1516. Jerusalem Monograph Series no. 1. London: British School of Archaeology in Jerusalem. p. 71.

Further reading

  • Mugnier, Clifford J. (2000). Grids & Datums. The State of Israel, Photogrammetric Engineering and Remote Sensing, 66, 2000, pp. 915-917, 933.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.