Pulteney Bridge

Pulteney Bridge by Thomas Malton in 1785

View of Pulteney Bridge in 2007

One of only four bridges in the world to have shops across its full span on both sides, the structure was designed by Robert Adam;[2][3] his original drawings are preserved in the Sir John Soane's Museum in London.[1][4]

The bridge is named after Frances Pulteney, wife of William Johnstone. He was a wealthy Scottish lawyer and Member of Parliament. Frances was the third daughter of MP and government official Daniel Pulteney (1684–1731) and first cousin once removed of William Pulteney, 1st Earl of Bath. She inherited the Earl's substantial fortune and estates close to Bath in Somerset after his death in 1764 and that of his younger brother and heir in 1767, and the Johnstones changed their surname to Pulteney. The rural Bathwick estate, which Frances and William inherited in 1767, was across the river from the city and could only be reached by ferry. William made plans to create a new town, which would become a suburb to the historic city of Bath, but first he needed a better river crossing.[2] The work of the Pulteneys is memorialised by Great Pulteney Street in Bathwick,[5] and Henrietta Street and Laura Place, named after their daughter Henrietta Laura Johnstone.[6][7]

Initial plans for the bridge were drawn up by Thomas Paty, who estimated it would cost £4,569 to build, but that did not include the shops.[8] A second estimate of £2,389 was obtained from local builders John Lowther and Richard Reed; it included two shops at each end of the bridge, but work did not begin before winter weather made construction of the pillars impossible. In 1770 the brothers Robert and James Adam, who were working on designs for the new town at Bathwick, adapted Paty's original design.[8] Robert Adam envisaged an elegant structure lined with shops, similar to the Ponte Vecchio and the Ponte di Rialto he would likely have seen when he visited Florence and Venice. Adam's design more closely followed Andrea Palladio's rejected design for the Rialto.[2] The revised bridge was 15 metres (50 ft) wide, rather than the 9.1 metres (30 ft) width envisaged by Paty, which overcame the objections of the local council about the bridge being too narrow.[8]

Construction started in 1770 and was completed by 1774 at a cost of £11,000.[9] The builders for the lower part of the bridge were local masons Reed and Lowther; the shops were constructed by Singers and Lankeshere.[8]

View from the north side

Pulteney Bridge stood for less than 20 years in the form Adam created. In 1792 alterations were made during which the bridge was widened to 18 metres (58 ft) and the shops enlarged, converting the original sixteen shops into six larger ones.[8] Floods in 1799 and 1800 wrecked the north side of the bridge, which had been constructed with inadequate support. Thomas Telford suggested replacing the bridge with a single span cast iron bridge. However it was rebuilt by John Pinch senior, surveyor to the Pulteney estate, in a less ambitious version of Adam's design.[9] Nineteenth-century shopkeepers changed the structure and appearance of their premises by changing windows, or expanding them by adding cantilevers over the river. Some painted advertisements on the outside of their shops, affecting the view from the river and Grand Parade.[8] The western end pavilion on the south side was demolished in 1903 for road widening and its replacement was not an exact match.[8]

In 1936 the bridge was designated an ancient monument.[10] The city council bought several of the shops and made plans for the restoration of the original façade,[8] which was completed in time for the Festival of Britain in 1951.[4] Further work was carried out in the 1960s to repair the underside soffits of all three arches.[11] More restoration of the southern street facade was needed in 1975.[2] The status of the bridge as an ancient monument was replaced in 1955 with its designation as a Grade I listed building.[10]

In 2009 Bath and North East Somerset council put forward a proposal to close the bridge to motor traffic and convert it to a pedestrianised zone,[12][13] but the plan was abandoned in September 2011.[14] It however remains a large source of income for the Council, due to it being the most fined bus lane in the city.[15]

Shops on the north side

The bridge features two ranges of shops designed in the Palladian style c. 1770, between them forming a narrow street over the bridge. The street and buildings sit above three segmental arches of equal span.[16]

The shops on the north side have cantilevered rear extensions.[17][18] Consequently, the northern external façade of the bridge is asymmetrical, much altered and of no architectural merit,[8] whereas the southern external side clearly shows the hand of Robert Adam.

Pulteney Bridge in 1779 by Thomas Malton

Built of limestone, in classic Palladian style, the southern façade takes the form of a temple-like central bay with symmetrical wings connecting to two flanking, terminating pavilions. The central bay is given eminence by a broken pediment supported by austere Doric pilasters. It in turn is flanked by two small bays, each with a small pointed pediment supported by shallow pilasters, which further emphasise and complement the central broken pediment sitting above a large Palladian window – the focal point of the building. On this southern side the structure comprises a principal floor at street level, with a low mezzanine separated by stone banding above. Beneath the principal floor is a sub-floor constructed in the masonry between the spans of the bridge, its presence indicated by ocular windows placed symmetrically beneath the span of each arch. This ocular motif, on a reduced scale, is repeated symmetrically at mezzanine level beneath the central broken pediment. The two terminating pavilions, in reality slight projections, have shallow saucer domes concealed behind their pointed pediments. The roof is pitched and of Welsh slate.

The western mid-stream pier was rebuilt in 1804.[9] Further alteration took place in 1895, when the western pavilion was moved for the construction of the Grand Parade. The appearance changed yet again when the current weir, the scene of Javert's suicide in the film version of Les Misérables,[19][20] was constructed between 1968 and 1972 as part of a flood-prevention scheme.[9][21] Further restoration was undertaken in 1975.

• Ponte Vecchio
• Krämerbrücke
• Rialto Bridge

Notes

Bibliography

Wikimedia Commons has media related to Pulteney Bridge.

• Lecture Diagram 58: Perspective Construction of Pulteney Bridge, Bath (after Thomas Malton Junior) c.1810 by Joseph Turner, at the Tate, retrieved 25 April 2013