Response Prompting Procedures

The SLP prompting procedure uses and removes prompts by moving through a hierarchy from less to more restrictive prompts.[1][2][3] If the student emits the correct behavior at any point during this instructional trial (with or without prompts), reinforcement is provided. The system of least prompts gives the learner the opportunity to exhibit the correct response with the least restrictive level of prompting needed. Because teachers are required to use multiple types of prompts (e.g., verbal and physical prompts), the SLP prompting procedure may be complicated for use in typical settings,[4] but may be similar to non-systematic teaching procedures typically used by teachers that involve giving learners an opportunity to exhibit a behavior independently before providing a prompt.

The MTL prompting procedure (Cuvo, Leaf, & Borakove, 1978) removes prompts by moving through a hierarchy from most restrictive to less restrictive.[8] The MTL prompting procedure begins with the most restrictive prompt, usually a physical prompt. After the learner has received reinforcement for completing the task with physical prompts, a less restrictive prompt is given (e.g., a partial physical prompt), and then an even less restrictive prompt (e.g., verbal prompt). Usually, a specific criterion is set for each prompt change (e.g., after three days of correct performance of the behavior with the use of a partial physical prompt, a verbal prompt will be used). If the individual fails to perform the behavior correctly with the less intrusive prompt, the instructor would return to a more intrusive prompt for a specified number of trials.[9] Eventually, the discriminative stimulus for the behavior is the typically occurring stimulus (e.g., when lunch is finished, student independently goes to the sink to wash hands) or the direction (e.g., when teacher says "Class, it is time to sit in your desks", the student sits in his desk).

With CTD and PTD procedures, the same prompt is used throughout, and this prompt should ensure that the learner can give the correct response: It is a "controlling" prompt. The time delay prompt procedures are different from SLP and MTL procedures because instead of removing prompts by progressing through a hierarchy, prompts are removed by delaying them in time. The progressive time delay procedure was developed first,[13] and the constant time delay procedure was developed as a more parsimonious procedure for teaching students with disabilities.[14] CTD and PTD are systematic procedures that use the teaching strategy of waiting on a learner's response that has likely been used haphazardly for years.[15]

When using time delay procedures, a prompt is initially given immediately after the desired discriminative stimulus. For example, immediately after the teacher says "What is this?" while showing a picture of a dog, she gives the student the correct answer "dog". After a pre-specified number of trials (when teaching discrete tasks, usually this is a "session" comprising at least 10 trials), the prompt is delayed. In the previous example, the teacher would ask the question "What is this?" and would then wait a few seconds before giving the controlling prompt "dog". PTD delays the prompt in time gradually, so the teacher would first wait 1 second, then 2 seconds, etc. CTD delays the prompt in time only once, usually by 3–5 seconds.

A modification of the time delay procedures was presented by Schuster and colleagues in 1992.[19][20] For this procedure, the same prompt is given during every session (a controlling prompt; similar to CTD & PTD). However, the prompt is not delayed in time. During every instructional session, the prompt is immediately given to the student after the stimulus is presented (see 0 second delay sessions, above). The learner does not have a chance to emit an unprompted response during these sessions. However, immediately before each session, a probe session is conducted to test whether the child can emit an unprompted correct response. So, using an example similar to the one above, a teacher might present a picture and ask "What is this?" and then immediately give a prompt ("dog") during instructional sessions. Each day prior to instructional sessions, the teacher would ask "What is this?" but provide no prompts. This probe session is done to test whether the student has acquired the material. Instruction ends when the learner reaches a criterion level (e.g., 100% correct for 3 consecutive days) during probe sessions.

The primary advantage of simultaneous prompting, when compared with time delay procedures, is that a learner does not need to have the prerequisite skill of waiting for a prompt if he or she cannot independently emit the behavior. It is also a less complicated procedure for teachers to use because there are fewer response variations (e.g., unprompted corrects and unprompted incorrects are not possible) and fewer prompt variations (e.g., no need to vary prompt intrusiveness or delay).

Simultaneous prompting has been used with learners from three years of age through adulthood, and with learners with learning disabilities, intellectual disabilities, developmental delays, and learners without disabilities.[21] A recent study suggests that it may not be necessary to conduct probes every day,[22] but further research is needed to determine how frequency of probe sessions affects efficiency of the procedure.

All of the discussed response prompting procedures can be considered evidence based practices using the criteria suggested by Horner and colleagues in 2005.[23][24] Studies have shown that response prompting is effective for learners from preschool through adulthood, in a variety of instructional contexts (e.g., embedded into large group activities, during small group direct instruction). In addition, studies have shown that a variety of instructional agents, including teachers, assistants, and peers with and without disabilities, can accurately use prompting procedures.

Little is known about the use of prompting procedures when procedural fidelity is low, as it may be in typical instructional contexts, though errors in some steps of the procedure may not impede learning.[25] Additional studies regarding typical errors made by instructors and the effects of the errors on acquisition of skills by learners are needed. In addition, prompting procedures have been primarily used to teach specific responses rather than response classes (e.g., conversational skills, social play skills). The relative effectiveness of response prompting procedures to teach response classes needs to be studied.[26]