Rickenbacker

Adolph Rickenbacher and George Beauchamp founded the company in 1931 as the Ro-Pat-In Corporation (ElectRo-Patent-Instruments) to sell electric Hawaiian guitars. Beauchamp had designed these instruments, assisted by Paul Barth and Harry Watson, at National String Instrument Corporation.[1] They chose the brand name Rickenbacher (later changing the spelling to Rickenbacker). Early examples bear the brand name Electro.[2]

The early instruments were nicknamed "frying-pans" because of their long necks and small circular bodies. They are the first known solid-bodied electric guitars, though they were a lap-steel type. They had a single pickup with two magnetized steel covers, shaped like "horse shoes," that arched over the strings. By the time they ceased producing the "frying pan" model in 1939, they had made several thousand units.[3]

Electro String also sold amplifiers to go with their guitars. A Los Angeles radio manufacturer named Van Nest designed the first Electro String production-model amplifier. Shortly thereafter, design engineer Ralph Robertson further developed the amplifiers, and by the 1940s at least four different Rickenbacker models were available. James B. Lansing of the Lansing Manufacturing Company designed the speaker in the Rickenbacker professional model. During the early 1940s, Rickenbacker amps were sometimes repaired by Leo Fender, whose repair shop evolved into the Fender Electric Instrument Manufacturing Company.

George Beauchamp was a vaudeville performer, violinist, and steel guitarist who, like many acoustic guitarists in the pre-electric-guitar 1920s, was looking for some way to make his instrument cut through an orchestra. He first conceived of a guitar fitted with a phonograph-like amplifying horn. He approached inventor and violin-maker John Dopyera, who made a prototype that was, by all accounts, a failure. Their next collaboration involved experiments with mounting three conical aluminum resonators into the body of the guitar beneath the bridge. These efforts produced an instrument that so pleased Beauchamp that he told Dopyera that they should go into business to manufacture them. After further refinements, Dopyera applied for a patent on the so-called tri-cone guitar on April 9, 1927. Thereafter, Dopyera and his brothers made the tri-cone guitars in their Los Angeles shop, under the brand name National. On January 26, 1928, the National String Instrument Corporation opened, with a new factory located near a metal-stamping shop owned by Adolph Rickenbacher and staffed by experienced and competent craftsmen. The company made Spanish and Hawaiian style tri-cone guitars as well as four-string tenor guitars, mandolins, and ukuleles.[4]

Adolph Rickenbacher was born in Basel, Switzerland in 1887 and emigrated to the United States to live with relatives after the death of his parents. Sometime after moving to Los Angeles in 1918, he changed his surname to "Rickenbacker". In 1925, Rickenbacker and two partners formed the Rickenbacker Manufacturing Company and incorporated it in 1927. By the time he met George Beauchamp and began manufacturing metal bodies for the "Nationals" being produced by the National String Instruments Corporation, Rickenbacker was a highly skilled production engineer and machinist. Adolph Rickenbacher became a shareholder in National and, with the assistance of his Rickenbacker Manufacturing Company, National boosted production to fifty guitars a day.[5]

Unfortunately, National's line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost to remain competitive. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929. He subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929, with Dobro suing National for $2 million in damages. Problems within National's management as well as pressure from the deepening Great Depression led to a production slowdown at National. This ultimately resulted in part of the company's fractured management structure organizing support for George Beauchamp's newest project: development of a fully electric guitar.[6]

By the late twenties, the idea for electrified string instruments had been around for some time, and experimental banjo, violin, and guitar pickups had been developed. George Beauchamp had experimented with electric amplification as early as 1925, but his early efforts, which used microphones, did not produce the effect he desired. Beauchamp also pursued the idea, building a one-string test guitar out of a 2X4 piece of lumber and an electric phonograph pickup. As problems at National became more apparent, Beauchamp's home experiments became more rigorous, and he began to attend night classes in electronics and collaborate with fellow National employee Paul Barth.[1] When they finally developed a prototype electric pickup that met their satisfaction, Beauchamp asked former National shop craftsman Harry Watson to make a wooden neck and body to hold the pickup. Somebody nicknamed it the "fry-pan" because of its shape, though Rickenbacker liked to call it the pancake.[7] The final design Beauchamp and Barth developed was an electric pickup consisting of a pair of horseshoe-shaped magnets that enclosed the pickup coil and completely surrounded the strings.[1]

(Left): Rickenbacker 330JG; (right): sketch of Rickenbacker "frying pan" lap steel guitar from 1934 patent application

At the end of 1931, Beauchamp, Barth, Rickenbacher and several other individuals banded together and formed the Ro-Pat-In Corporation (elektRO-PATent-INstruments) to manufacture and distribute electrically amplified musical instruments, with an emphasis on their newly developed A-25 Hawaiian Guitar, often referred to as the "fry-pan" lap-steel electric guitar as well as an Electric Spanish (standard) model and companion amplifiers. In the summer of 1932, Ro-Pat-In began to manufacture cast aluminum production versions of the Fry-Pan as well as a lesser number of standard Spanish Electrics also known as "Electro-Spanish" models, built from wooden bodies similar to those made in Chicago for the National Company. These instruments constitute the origin of the electric guitar by virtue of their string-driven electro-magnetic pick-ups. In 1933 the Ro-Pat-In company's name was changed to Electro String Instrument Corporation and its instruments labeled simply as "Electro". In 1934 the name of Rickenbacher" was added in honor of the company's principal partner, Adolph Rickenbacker.[8][9]

During the early production of the A-22 Fry-Pan, Beauchamp and Rickenbacher would experiment with wooden-bodied Spanish guitars and solid body prototypes; ultimately giving birth to the Electro-Spanish Model B and the Electro-Spanish Ken Roberts. Both models had been experimental, produced as early as 1931, and officially released in 1935. The Electro-Spanish Ken Roberts model was subject to a limited production of forty-six. There were several new design elements found on the Electro-Spanish Ken Roberts. The instrument was the first of its kind to be named for an endorser. While most arch-top guitars had 14-fret neck joints, the Electro-Spanish Ken Roberts fingerboard joined the body at the 17th fret allowing much greater access to the higher frets, creating a full 25-1/2" inch scale. This addition made the Electro-Spanish Ken Roberts the first production full scale (25-1/2") electrified guitar.[8][9]

Another new feature on the Electro-Spanish Ken Roberts is the stock Kauffman Vib-rola tailpiece, the world's first patented tremolo (US Patent: US2241911A). The Ken Roberts is the first instrument of any type to feature a hand-operated vibrato as standard equipment. It also marks Rickenbacker's first link to the unit's originator, Clayton Doc Kauffman, who would become a design collaborator for the company a couple of years later.[8][9]

In 1935, the company introduced several new models including the Model "B" Electric Spanish guitar, which is the first known solid body electric guitar. Because the original aluminum Fry-Pans were susceptible to tuning problems from expansion of the metal under hot performing lights, they made many of the new models from cast Bakelite, an early synthetic plastic used in bowling balls.[2]

Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the advent of rock and roll, F.C. Hall, owner of Radio & Television Equipment Co. (Radio-Tel), purchased the Electro String Company from Adolph Rickenbacker in 1953. Hall overhauled the business and began focusing on standard electric and acoustic guitars rather than the steel guitars the company pioneered. In 1956, Rickenbacker introduced two instruments with the "neck through body" construction that became a standard feature of many of the company's products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series. Neck Thru consists of a single wooden piece from the neck through the central body section.

In 1958, Hall introduced prototype called "capris" (the same name of Hall family's cat from the pronunciation of the French noun for whim).[10]

In 1963, Rickenbacker developed an electric twelve-string guitar with an innovative headstock design that fit all twelve machine heads onto a standard-length headstock by mounting alternate pairs of machine heads at right-angles to each other. After including the twelve-string guitar in the Rickenbacker 300 Series.

Body of a 370/12, with the distinctive R-tailpiece, sharkfin inlays and stereo jacks

In the 1960s, Rickenbacker benefited tremendously when a couple of Rickenbacker guitar models became permanently intertwined with the sound and look of The Beatles.

In Hamburg in 1960, Beatles guitarist John Lennon bought a Rickenbacker 325, which he used throughout the early days of The Beatles. He eventually had the guitar's natural alder body refinished in black, and made other modifications, including adding a Bigsby vibrato tailpiece and regularly changing the control knobs.[11] Lennon played this guitar for the Beatles' 1964 debut on The Ed Sullivan Show (as well as for their third Sullivan appearance, pre-taped the same day but broadcast two weeks later). During Lennon's post-Beatles years in New York, he had this guitar restored to its original natural wood finish and the cracked gold pickguard replaced with a white one.[11]

Rickenbacker made two new 325s for Lennon and shipped them to him while the Beatles were in Miami Beach, Florida, on the same 1964 visit to the United States: a one-off custom 12-string 325 model and an updated six-string model with modified electronics and vibrato. He used this newer six-string model on the Beatles' sequentially "second" appearance on The Ed Sullivan Show.[11]

Lennon accidentally dropped the second 325 model during a 1964 Christmas show, breaking the headstock. While it was being repaired, Rickenbacker's UK distributor Rose Morris gave Lennon a model 1996 (the export version of a 325, available exclusively in a red finish and with an F-hole). Lennon later gave the 1996 to fellow Beatle Ringo Starr.[11]

The typical 12-string headstock, with the slotted tuners for the octave strings

Beatles guitarist George Harrison bought a 420 during a brief visit to the United States in 1963.[11] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[11] This instrument became a key part of the Beatles' sound on their LP A Hard Day's Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.

On August 21, 1965, during a Beatles concert tour, Randy Resnick of B-Sharp, a Minnesota music store, presented Harrison with a second model 360/12 FG "New Style" 12-string electric guitar, distinguishable from Harrison's first 12-string by its rounded cutaways and edges. A television documentary produced by KSTP-TV in Minneapolis documents the event. Harrison used this guitar on the song "If I Needed Someone" and during the Beatles' 1966 tours.[11] This 12-string's whereabouts are unknown, as it was stolen at some point after the band ceased touring.[11]

After the Beatles 1965 summer tour, Paul McCartney frequently used a left-handed 1964 4001S FG Rickenbacker bass rather than the lightweight Höfner basses he had used previously. The instrument became popular with other bassists influenced by McCartney's highly melodic style.

In 1967, McCartney gave his 4001 a psychedelic paint job, as seen in the promo film for "Hello, Goodbye", and in the Magical Mystery Tour film.[11] A year or so later, someone sanded off the finish. A second, over-zealous sanding in the early 1970s removed the "points" of the bass' cutaways. McCartney used the Rickenbacker bass during his time with Wings, until the late 1970s.

Partly because of the Beatles' popularity and their consistent use of the Rickenbacker brand, many sixties guitarists adopted them, including John Fogerty (Creedence Clearwater Revival), Paul Kantner (Jefferson Airplane), and John Entwistle and Pete Townshend of The Who. As both the British Invasion and the 1960s wound down, Rickenbacker guitars fell out of fashion for a time. Rickenbacker basses, however, remained popular through the 1970s and beyond. In the late 1970s and early 1980s, Rickenbacker guitars experienced a renaissance as new wave and jangle pop groups turned to them for their distinctive chime. Demand is particularly high among retro groups influenced by the sound and look of the 1960s.