Roof edge protection

Roof edge protection is fall protection equipment most commonly used during the construction of commercial buildings or residential housing. It often consists of a toe board, a main guard rail and an intermediate rail.".[1]

Guardrail on residential building site in Australia

Many US federal and state laws require building contractors to implement measures to prevent workers falling from heights. These laws often expressly require the use of edge protection or harness systems.

In the UK edge protection guidelines are set out by the Edge Protection Federation's Code of Practice, which itself has been written to comply with BS EN 13374.[2]

Edge protection is often required to meet strict technical safety standards set by government authorities.[3]

Depending on occupational safety requirements in any given country or region, the quality of edge protection used on building and construction sites can be examined by government inspectors.

Builders can be prosecuted for using a non-compliant height safety protection system.

See also

References
  1. ,"Policy on working at height - edge protection 7.2.4".
  2. "Edge Protection Systems". InterTLC. July 19, 2018. Retrieved 2018-07-19.
  3. "Installation of Roof Edge Protection, Ladder and Repair of Rubber Roofs". General Services Administration. September 7, 2010. Retrieved 2012-09-04.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.