Santa Fe class 3450

The Atchison, Topeka and Santa Fe Railway's 3450 class comprised ten 4-6-4 "Hudson" type steam locomotives built by the Baldwin Locomotive Works in 1927. Built as coal-burners, they were later converted to oil-burning during the 1930s. At the same time, the locomotives were given 79-inch (2,007 mm) driving wheels instead of their original 73-inch (1,854 mm), and the boiler pressures increased from 220 to 230 lbf/in2 (1.52 to 1.59 MPa). Combined, these changes reduced the starting tractive effort from 44,250 to 43,300 lbf (196.8 to 192.6 kN), but increased the top speed and efficiency. Their early service was in the Midwest, between Chicago, Illinois and Colorado; later, some were assigned to service in the San Joaquin Valley of California between Bakersfield and Oakland.

ATSF 3450 class
ATSF No. 3450 on static display at the RailGiants Train Museum
Type and origin
Power typeSteam
BuilderBaldwin Locomotive Works
Build date1927
Total produced10
Specifications
Configuration:
  Whyte4-6-4
  UIC2′C2′ h
Gauge4 ft 8 12 in (1,435 mm) standard gauge
Driver dia.73 in (1,854 mm), later: 79 in (2,007 mm)
Length97 ft 11 in (29.85 m)
Adhesive weight198,000 lb (90,000 kilograms; 90 metric tons)
Loco weight343,900 lb (156,000 kilograms; 156.0 metric tons)
Total weight639,260 lb (289,960 kilograms; 289.96 metric tons)
Fuel typeCoal (later converted to oil in the 1930s)
Fuel capacity5,000 US gal (19,000 l; 4,200 imp gal)
Water cap15,000 US gal (57,000 l; 12,000 imp gal)
Firebox:
  Firegrate area
88 sq ft (8.2 m2)
Boiler pressure220 lbf/in2 (1.52 MPa), later: 230 lbf/in2 (1.59 MPa)
CylindersTwo, outside
Cylinder size25 in × 28 in (635 mm × 711 mm)
Valve gearWalschaerts
Valve typePiston valves
Performance figures
Tractive effort44,250 lbf (196.8 kN), later: 43,300 lbf (192.6 kN)
Career
OperatorsAtchison, Topeka and Santa Fe Railway
Numbers3450–3459
PreservedOne (No. 3450) preserved, remainder scrapped
DispositionNo. 3450 on display receiving a cosmetic restoration at the RailGiants Train Museum in Pomona, California

They were smaller and less powerful locomotives than the later 3460 class, but were capable of equivalently high speeds.

The first locomotive built, No. 3450, was donated by the Santa Fe in 1955 to the Railway and Locomotive Historical Society's Southern California chapter, and is preserved at the Society's museum in the Los Angeles County Fairgrounds at Pomona, California. The locomotive sits inside the RailGiants Train Museum. It is not in operational condition but is preserved in good condition as a static exhibit. It is currently finishing a cosmetic restoration. Visitors who walk into the cab can ring the bell and blow the classic ATSF 6 chime whistle, which receives pressure from an air compressor.

Other Images

References

  • "Atchison, Topeka and Santa Fe 3450". Southern California Chapter, Railway and Locomotive Historical Society. Archived from the original on 2005-03-17. Retrieved 2006-01-22.
  • Barris, Wes. "Atchison, Topeka & Santa Fe Hudsons". SteamLocomotive.com. Archived from the original on 7 March 2006. Retrieved 2006-01-22.
  • Glischinski, Steve (1997). Santa Fe Railway. Osceola, WI: Motorbooks International. ISBN 978-0-7603-0380-1.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.