Termite barrier

Termite barriers are materials that have been specifically designed to prevent subterranean termites from gaining access to a structure. Physical termite barriers are free of pesticides and physically block termite foraging activity. Development of physical barriers to effectively exclude subterranean termites makes it possible to design and build structures with a far lower possibility of termite invasion and damage over the life of the building. Because of their small size (0.02 inches (0.51 mm) long), impressive reproductive capability (a termite queen products one egg every 3 seconds, or over 10 million eggs per year), and ability to eat through many construction materials, termites are the most destructive of all insects.

Termite shields, an early physical barrier, are sheet metal fabrications used for decades in light frame construction. Termite shields are often applied underneath wood sill plates. They are designed to force termites to build their mud tubes outside of the structure, where they become visible to a trained pest management professional. (See Termite shield)

Membranes

Termite membrane barriers consist of elastomeric sealants adhered to a high-strength backing. When included in the building envelope, membrane barriers perform multiple functions. In addition to excluding termites and insects, they act as waterproofing, air barrier, and vapor barrier. Applications for termite membranes include on concrete foundation walls, ICF insulated concrete forms, under-slab waterproofing, under-sill plates, flooring underlayments, and as wall, window, and door flashings, among others. Most termite membranes must be implemented during the construction process.

Sealants

Termite sealant materials are the basic component of termite membranes described above. Sealants are elastomeric, meaning they move with the structure without tearing, and are available in a caulk or spreadable formulation. When caulked around a plumbing penetration in a structure, termite sealant barriers adhere to both the pipe and the concrete. As the structure moves during settling or due to expansive soils, the sealant barrier material maintains a barrier impenetrable by termites and other insects.

Stainless steel screens

To effectively exclude subterranean termites, screen apertures smaller than 0.02 inches (0.5 mm) are required. [1] Application areas for screens in the building envelope include weep holes, soffits, gable and ridge vents, among others.

Particle barriers

Particulate termite barriers are widely used around the Pacific Basin. Developed commercially by University of Hawaii scientist Minord Tamashiro in the 1980s. However, particle barriers only recently became commercially available in the mainland United States. The principle behind particle barriers has been well researched by Ebeling and Pence (1957),[2] Su et al. (1991),[3] Su and Scheffrahn (1992),[4] Yates et al. (2003), and Keefer et al. (2013).[5] Basaltic termite particle barriers are used in Hawaii, but hardly any place else, because basaltic rock comes from volcano activity, which only takes place in isolated areas of the world. Any hard mineral, such as granite which is used in Australia, will work as a termite barrier if it has the requisite size and shape properties.

Research with particle barriers began at Texas A&M University in 2003. Various particle characteristics were evaluated, including size, angularity, and interstitial space between particles.[5] This material can be installed around the exposed perimeter of a home or structure in a wedge formation that measures 4 inches (100 mm) across and 5 inches (130 mm) down, directly against the foundation. Aggregate barriers have also shown success when installed in bath traps or slab leave-outs. During construction and after the foundation is poured, cardboard and other debris is removed from bath trap areas and the particle barrier is installed. Application of this material protects the structure from termite intrusion in a vulnerable entry point.

One problem with particle barriers is that there are erroneous references on the Web to the use of particle barriers to stop termites. One source says "use a sand barrier". Another says that "16 grit sand is acceptable". Although this loose specification is appreciated by some building contractors who can purchase "sand" or "16 grit sand" inexpensively at lumberyards and other outlets, it has the effect of damaging the credibility of particle barriers as a termite protection method. All of the research listed above, which took place at universities of California-Berkeley (1956), Hawaii (1982 - 2003), Florida (1992), and Texas A&M (2003 - 2013)pointed to sizes between 8 and 14 as being most effective.

References

  1. Geiger, Chris A.; Cox, Caroline. "Pest Prevention by Design" (PDF). San Francisco Environment. Retrieved 23 February 2017.
  2. Ebeling, Walter; Pence, Roy J. (May 1957). "Relation of Particle Size to the Penetration of Subterranean Termites through Barriers of Sand or Cinders". Journal of Economic Entomology. 50 (5): 690. doi:10.1093/jee/50.5.690.
  3. Su, Nan-Yao; Scheffrahn, Rudolf H.; Ban, Paul M. (1991). "Uniform Size Particle Barrier: A physical exclusion device against subterranean termites (Isoptera: Rhinotermitidae)". Journal of Economic Entomology. 84 (3): 912. doi:10.1093/jee/84.3.912.
  4. Su, Nan-Yao; Scheffrahn, Rudolf H. (1992). "Penetration of sized-particle barriers by field populations of subterranean termites (Isoptera: Rhinotermitidae)". Journal of Economic Entomology. 85 (6): 2275. doi:10.1093/jee/85.6.2275. Retrieved 24 February 2017.
  5. Keefer, T. Chris; Zollinger, Dan G.; Gold, Roger E. (September 2013). "Evaluation of aggregate particles as a physical barrier to prevent subterranean termite incursion into structures" (PDF). Southwestern Entomologist. 38 (3): 447–464. doi:10.3958/059.038.0308. Retrieved 23 February 2017.
  1. Scientific American; https://blogs.scientificamerican.com/running-ponies/long-live-the-morbidly-obese-termite-queen-and-her-terrifying-army-of-sweat-licking-babies/
  2. Pest Control Technology; https://www.pctonline.com/article/pct0215-annual-termite-damage-quest/
  3. Gold, Roger; (October 2015. "Pest Exclusion Using Physical Barriers - Part of the Sustainable Future for New and Existing Structures" (https://www.youtube.com/watch?v=2c2BEFq9Bmk. ' 'Pest World 2015 - National Pest Management Association' '). Retrieved 25 October 2017.
  4. International Code Council AC 380 "Acceptance Criteria for Termite Physical Barrier Systems" (http://shop.iccsafe.org/ac380-termite-physical-barriers-approved-oct-2014-editorially-revised-feb-2017-pdf-download.html)
  5. International Code Council ICC Evaluation Report ESR-3632 TERM Barrier System (http://www.icc-es.org/Reports/pdf_files/load_file.cfm?file_type=pdf&file_name=ESR-3632.pdf)
  6. International Code Council ICC Evaluation Report ESR-1860 Termimesh Termite Control System (http://www.icc-es.org/Reports/pdf_files/load_file.cfm?file_type=pdf&file_name=ESR-1860.pdf)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.