Vesuvius-class sloop

The Dutch naval plan 1855 stated that the steam corvette of 250 hp and 12 30-pounders (the Groningen-class corvettes) would be the standard warship for the Dutch East Indies. However, the plan also recognized that in the East Indies, there were 'too many points to occupy, too many seas to patrol, and too many corners to penetrate' to use only these still costly ships.[4] The plan 1855 therefore specified a second type of ships for the indies: the sloop of 100 hp. Regular service in the East Indies required 12 such sloops. The West Indies three more, and 2 were required for replacement. In total 17 sloops would be required in peace time, and 20 in times of war.

In Dutch the Vesuvius class was known as a class of 'schroefstoomschepen'. The Dutch navy referred to them as 'schroefstoomschip' of a certain class, i.e. 1-4th class, but this classification varied. In 1859 the class was designated as 'schroefstoomschepen 4th class'.[5] In 1861 the class (and some other ships) were 'schroefstoomschepen 3rd class'.[6] In Dutch the lead ship Vesuvius (as well as the Bali, Soembing and Montrado) were first called schooners,[7] or even schroefstoomschooner. In the English Navy warships of a comparable size were called sloops.

There might be some doubt about the lead ship of the class Vesuvius because of an error that Tideman made in his famous Memoriaal (1880). In a table Tideman gives the Vesuvius as a Schroefstoomschip 4th class that was no longer in use, but it was a Schroefstoomschip 3rd class. The table then gives a displacement of 586t, a length of 40.7 m and a power of 80 hp.[10] This would lead to the conclusion that the Vesuvius was a ship like the Apeldoorn and the Vecht in the same table. The note above the table (the sizes etc. in this table are an approximation) kind of indicates how the table was made. In reality there were always minor differences between the ships of a class. For this table of defunct ships however, the dimensions of most ships directly depend on the type of the ship. In the table all fourth class screw ships got length 40.70 m, displacement 586t and 80 hp. Official publications give a power of 119 hp[5][6][11] for the Vesuvius, so there is an error. The error in the table is in the classification of the Vesuvius as a Schroefstoomschip 4th class. In the same table Het Loo, Reinier Claeszen, and the Reteh are correctly classified and do have the correct dimensions and power. A probable explanation is that at first the Vesuvius was indeed classed as a Schroefstoomschip 4th class[5] (cf above). This was changed soon after, and from 1861 onward the Vesuvius was classed as a Schroefstoomschip 3rd class.[6][11]

In his Verhandeling over de scheepsbouwkunde als wetenschap (1859) written at the time the Vesuvius was built, Tideman does give the correct dimensions: Length 43,0 m, beam 9.16 m, draught 3.46 m, 120 hp, displacement 651 cubic meters.[7] Except for the displacement these exactly fit the other ships of the class in his later Memoriaal. Her captain Arntzenius noted that the ship had to pay the pilot in Jamaica according to the tonnage (Dutch tonnemaat, not displacement) range of 400-700 tons.[12] Indeed, in 1880 Tideman would give the tonnage of the other ships in the class as 400tons, and that of a ship displacing 586t as 280 tonnage.[10] Furthermore, the Explanatory Memorandum (Dutch: Memorie van toelichting) for the 1860 naval budget clearly states that the 5 other ships were built to the model of the Vesuvius.[8]