ADAT

Alesis Digital Audio Tape (ADAT) is a magnetic tape format used for the recording of eight digital audio tracks onto the same S-VHS tape used by consumer VCRs.

An ADAT XT 8-channel digital audio recorder

History

The product was announced in January 1991 at the NAMM convention in Anaheim, California by Alesis. The first ADAT recorders shipped over a year later in February or March 1992.[1] More audio tracks could be recorded by synchronizing up to 16 ADAT machines together, for a total of 128 tracks. While synchronization had been available in earlier machines, ADAT machines were the first to do so with sample-accurate timing - which in effect allowed a studio owner to purchase a 24-track tape machine eight tracks at a time. This capability and its comparatively low cost, originally introduced at $3995, were largely responsible for the rise of project studios in the 1990s.[2]

BRC (Big Remote Control) Master ADAT Controller
LRC (Little Remote Control)

Several versions of the ADAT machine were produced. The original ADAT (also known as Blackface) and the ADAT XT recorded 16 bits per sample (ADAT Type I). A later generation of machines—the XT-20, LX-20 and M-20—supports 20 bits per sample (ADAT Type II). All ADAT machines use the same high-quality S-VHS tape media. Tapes recorded in the older Type I format can be read and written in the more modern machines, but not the other way around. Later generations record at two sample rates, 44.1 and 48 kHz, common in the audio industry. All models allow pitch control by varying the sample rate, and thus tape speed accordingly. An original Blackface could record at 44.1 kHz (or other desired sample rates) if the pitch was lowered or raised by a specific amount. An indicator on the LED display showed when 44.1KHz was reached.

With locate points it was possible to store sample-exact positions on tape, making it easy to find specific parts of digital recordings. Using auto play and auto record functions made it possible to punch in/out at predetermined points, rather than relying on human timing ability to start and stop recording at precisely the right instant.

ADAT machines could be controlled externally with the Alesis LRC (little remote control), which could be attached to the ADAT with a 1/4" tip/sleeve plug, and featured the transport controls and most commonly used functions. Alternatively, the BRC[3] (big remote control) could be used, which included many more features which the stand-alone ADAT did not have, such as song naming, more locate points and MIDI timecode synchronization.

Current status

ADAT tapes are still available through some pro-audio retailers with products from Maxell, EMTEC (formerly the tape division of BASF).

ADAT HD24

Although it is a tape-based format, the term ADAT now refers to its successor, the Alesis ADAT HD24, which features hard disk recording rather than the traditional tape-based ADAT, which in turn is now considered obsolete. Many still use the ADAT as a simple I/O (in/out) for transfer of analog to digital signals.

ADAT is also currently used as an abbreviation for the ADAT Lightpipe protocol, which transfers eight tracks in a single fiber optic cable. The ADAT cable standard is no longer strictly tied to ADAT tape machines and is now used by analog-to-digital converters, input cards for digital audio workstations, effects machines, etc. One of the original benefits of utilizing ADAT versus S/PDIF or AES3 was that a single cable could carry up to eight channels of audio. (AES10 (MADI) can now carry up to 64 channels.)

See also

References

  1. Peterson, George; Robair, Gino [ed.] (1999). Alesis ADAT: The Evolution of a Revolution. Mixbooks. p. 2. ISBN 0-87288-686-7
  2. George Petersen, "In Memoriam: Keith Barr 1949-2010", Mix Magazine Online, Aug 2010, http://mixonline.com/news/keith_barr_obit_2508/index1.html Archived 2010-08-29 at the Wayback Machine
  3. Alesis BRC Archived January 3, 2010, at the Wayback Machine

Media related to ADAT at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.