Armstrong Siddeley Adder

The Armstrong Siddeley ASA.1 Adder was an early British turbojet engine developed by the Armstrong Siddeley company and first run in November 1948.[1]

Adder
Armstrong Siddeley Adder turbojet on display at the Rolls-Royce Heritage Trust, Derby
Type Turbojet
Manufacturer Armstrong Siddeley
First run November 1948
Developed from Armstrong Siddeley Mamba
Developed into Armstrong Siddeley Viper

Design and development

The Adder, a turbojet derivative of the Armstrong Siddeley Mamba, was originally developed as an expendable engine to power the Jindivik 1 target drone. The engine was then developed into a longer-life engine before evolving into the more-powerful Armstrong Siddeley Viper.

The ASA.1 Adder was flight tested in the rear-turret position of the Avro Lancaster III SW342, the aircraft also having been previously modified and used for icing trials of the Mamba by Armstrong Siddeley's Flight Test Department at Bitteswell.

Applications

Specifications

Data from Aircraft Engines of the World 1953.[2]

General characteristics

  • Type: Turbojet
  • Length: 86.7 in (2,200 mm)
  • Diameter: 29 in (740 mm)
  • Dry weight: 580 lb (260 kg)

Components

  • Compressor: 10-stage axial-flow
  • Combustors: six can combustion chambers
  • Turbine: 2-stage axial
  • Fuel type: Aviation kerosene
  • Oil system: dry sump and total loss pressure spray

Performance

See also

Related development

Related lists

References

  1. Gunston, Bill (1989). World encyclopaedia of aero engines (Fully rev. 2nd ed.). Wellingborough: P. Stephens. p. 20. ISBN 1-85260-163-9.
  2. Wilkinson, Paul H. (1953). Aircraft Engines of the World 1953. New York: Sir Isaac Pitman & Sons Ltd. pp. 104–105.

Further reading

  • Turpin, Brian. "Turbine Test Beds". Aeroplane Monthly (February 1980).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.