Aurora, Elgin and Fox River Electric Company

By 1900 both Elgin and Aurora had electric streetcars on lines radiating out from downtown. Elgin had 12 miles (19 km) of track, the downtown area was double tracked in the 1920s. Aurora had 18 miles (29 km), with double track in most of the downtown area by 1900. Aurora’s lines were often “through routes”, entering downtown on one line and exiting on another.[8][9]

Since 31 March 1935, when rail passenger service was discontinued, routes in Aurora have changed, by 2013 under successor Pace little of the early city lines remained. In Elgin, by contrast, most streetcar lines are now part of longer bus routes.[lower-alpha 1][10]

The interurban line left Elgin going south on State Street (Route 31[lower-alpha 2]), past the State Hospital (a.k.a. Asylum)(mile 1.8), then down the side of LaFox Street through Clintonville/South Elgin (mile 3.1). Curving east onto private right of way the line went through the freight interchange at Coleman (mile 4.5)[lower-alpha 3], across the river on its own bridge, and continued south to an intersection with Fifth Avenue in St. Charles. Street running started there, south to Main Street, then west across the river to Third Street, and south again into Geneva on Anderson Boulevard. At State Street the line turned east and went to Third Street (Chicago Junction[lower-alpha 4], mile 11.6), where it turned south, then east, jogged south on Route 31, then onto private right of way between Route 31 and the river. A mile further south the line returned to Route 31, Batavia Avenue, street running through Batavia (mile 14.6), then on the east shoulder through North Aurora to the Aurora city limits. In Aurora the interurban used the Lake Street streetcar line on to the terminal.[11][12]

In 2013 Pace Route 801 Goes from Elgin to Geneva, although largely on a more western alignment. From Geneva to Aurora Pace Route 802 follows the original interurban line very closely.[10]

Interurban cars were double trucked with heavier construction than city cars.

Some double trucked cars were used in both city and interurban service.

Most city cars were single trucked “Birney” style, although a few double trucked cars were used.
On arrival cars 48, 50-97, bought by AE&FRE, replaced most older cars.

The Elgin and Belvidere Electric Company left Elgin from the end of the Edison Street line at Wing Street, going 36 mi (58 km) west through the small towns of Huntley and Marengo to Belvidere, and a 14-mile (23 km) run through connection to Rockford. With 9 passenger and 2 express cars they scheduled 19 trains each way with an hourly headway. Opened in 1907, it was the last to be closed to passenger service, in 1930.[19]

The Chicago, Aurora and DeKalb Railroad connected to the Aurora city system at Plum and View Streets, and went 28 miles (45 km) west through Kaneville to DeKalb. 3 passenger and 2 express cars made 9 trains each way in a day on a 90 min and 3 hour schedule. Opened in 1905 with light steam equipment, it was electrified by 1910, and closed in 1923.[20]

The Fox and Illinois Union Railway left Yorkville (where it also connected with the C.B.&Q) and ran 20 miles (32 km) straight south through Newark to Morris. Opened in 1914, two passenger cars ran 5 trains each way in a day. Grain was the major part of its freight traffic. Passenger service ended in 1924 but freight, converted to gas-electric in 1931, continued until 1937.[21]

The Aurora, Plainfield and Joliet Railroad left Aurora on the Parker Avenue line and ran 22 miles (35 km) southeast through Plainfield to Joliet. Eight passenger cars operated 17 trains each way in a day, and 3 streetcars provided local service in Joliet. First opened in 1903, it was converted to 5 Pierce-Arrow buses in 1924.[22]