Bhojeshwar Temple

The Bhojpur temple is believed to have been constructed by the 11th-century Paramara king Bhoja. Tradition also attributes to him the establishment of Bhojpur and the construction of now-breached dams in the area.[1] Because the temple was never completed, it lacks a dedicatory inscription. However, the name of the area ("Bhojpur") corroborates its association with Bhoja.[2]

This belief is further supported by the site's sculptures, which can be dated to the 11th century with certainty.[1] A Jain temple in Bhojpur, which shares the same sets of mason's marks with the Shiva temple, has an inscription explicitly dated to 1035 CE. Besides several literary works, historical evidence confirms that Bhoja's reign included the year 1035 CE: the Modasa copper plates (1010-11 CE) were issued by Bhoja; and the Chintamani-Sarnika (1055 CE) was composed by his court poet Dasabala. Moreover, the area around the temple once featured three dams and a reservoir. The construction of such a large Shiva temple, dams and reservoir could have only been undertaken by a powerful ruler. All this evidence appears to confirm the traditional belief that the temple was commissioned by Bhoja. Archaeology professor Kirit Mankodi dates the temple to the later part of Bhoja's reign, around mid-11th century.[3]

The Udaipur Prashasti inscription of the later Paramara rulers states that Bhoja "covered the earth with temples" dedicated to the various aspects of Shiva, including Kedareshvara, Rameshwara, Somanatha, Kala, and Rudra. Tradition also attributes the construction of a Saraswati temple to him (see Bhoj Shala). The Jain writer Merutunga, in his Prabandha-Chintamani, states that Bhoja constructed 104 temples in his capital city of Dhara alone. However, the Bhojpur temple is the only surviving shrine that can be attributed to Bhoja with some certainty.[4]

According to a legend in Merutunga's Prabandha-Chintamani, when Bhoja visited Srimala, he told the poet Magha about the "Bhojasvāmin" temple that he was about to build, and then left for Malwa (the region in which Bhojpur is located).[5] However, Magha (c. 7th century) was not a contemporary of Bhoja, and therefore, the legend is anachronistic.[6]

The temple originally stood on the banks of a reservoir 18.5 long and 7.5 miles wide.[7] This reservoir was formed through construction of 3 earth-and-stone dams during Bhoja's reign. The first dam, built on Betwa River, trapped the river waters in a depression surrounded by hills. A second dam was constructed in a gap between the hills, near present-day Mendua village. A third dam, located in present-day Bhopal, diverted more water from the smaller Kaliasot river into the Betwa dam reservoir. This man-made reservoir existed until 15th century, when Hoshang Shah emptied the lake by breaching two of the dams.[1]

Abandonment of construction

Architectural drawings engraved in the surrounding rock, for use by the artisans

It appears that the construction work stopped abruptly.[9] The reasons are not known, but historians speculate that the abandonment may have been triggered by a sudden natural disaster, a lack of resources, or a war. Before its restoration during 2006–07, the building lacked a roof. Based on this, archaeologist KK Muhammed theorizes that the roof could have collapsed due to a mathematical error made while calculating the load; subsequently, circumstances might have prevented Bhoja from rebuilding it.[10]

The evidence from the abandoned site has helped the scholars understand the mechanics and organisation of 11th century temple construction.[11] To the north and the east of the temple, there are several quarry sites, where unfinished architectural fragments in various stages of carving were found. Also present are the remains of a large sloping ramp erected for carrying the carved slabs from the quarries to the temple site.[4] Several carvings brought to the temple site from the quarries had been left at the site. The ASI moved these carvings to a warehouse in the 20th century.[9]

Detailed architectural plans for the finished temple are engraved on the rocks in the surrounding quarries.[12][4] These architectural plans indicate that the original intention was to build a massive temple complex with many more temples. The successful execution of these plans would have made Bhojpur one of the largest temple complexes in India.[10]

• 
  An unfinished statue at the site
• 
  Architectural fragments at one of the quarry sites
• 
  Carved rock fragments near the entrance

The marks of over 1,300 masons are engraved on the temple building, the quarry rocks and two other shrines in the village. This includes the names of 50 masons engraved on the various portions of the temple structure. Other marks are in the form of various symbols such as circle, crossed circle, wheel, trident, swastika, conch shell, and Nagari script characters. These marks were meant to identify the amount of work completed by individuals, families or guilds involved in the construction. The marks would have been erased while giving the finishing touches, had the temple been completed.[7]

The ceiling of the temple

In 2004, before ASI sealed the gaps to prevent rainwater percolation

In 2011, after ASI's installation of the fibreglass component

By 1950, the building had become structurally weak because of the regular rainwater percolation and removal of the stone veneers.[13] In 1951, the site was handed over to the Archaeological Survey of India (ASI) for conservation, in accordance with the Ancient Monuments Preservation Act 1904.[14] During the early 1990s, the ASI repaired the damaged steps of the platform and the sanctum, and also restored the missing ones. It also restored the facade on the north-west corner of the temple.[15]

During 2006–07, the ASI team supervised by KK Muhammed carried out a restoration of the monument. The team added a missing pillar to the structure. The 12-tonne pillar was carved out of a single stone by expert masons and sculptors in a style that matches the original. The monolith was procured from the area near Agra after a nationwide search for material matching the stone originally used in the temple. The team was unable to procure a crane with a sufficiently long boom. So, they lifted the monolith 30 feet up with the help of a system of pulleys and levers, which took 6 months to devise.[10][13] KK Muhammed noted that two other pillars in the temple weigh 33 tonnes, and are also carved out of a single stone: it must have been very challenging for the original builders to erect these pillars without modern technology and resources.[10]

The team closed the ceiling with a new architectural component matching the original one, to stop the water percolation. This fibreglass component weighs less than the original one, thus reducing unnecessary weight which could damage the structure. To further prevent the rainwater from getting in, the ASI also closed the portion between the wall and the superstructure by placing slanting stone slabs. In addition, the ASI placed new stone veneers matching the original ones on the northern, southern and western exterior walls of the temple.[13] The ASI also cleaned the dirt that had accumulated on the temple walls over the past few centuries.[10]

The temple lies on a platform 115 feet (35 m) long, 82 feet (25 m) wide and 13 feet (4.0 m) high. On the platform lies a sanctum containing a large lingam.[16] The sanctum plan comprises a square; on the outside, each side measures 65 feet (20 m); on the inside, each measures 42.5 feet (13.0 m).[17]

The lingam is built using three superimposed limestone blocks. The lingam is 7.5 feet (2.3 m) high and 17.8 feet (5.4 m) in circumference. It is set on a square platform, whose sides measure 21.5 feet (6.6 m).[18] The total height of the lingam, including the platform is over 40 feet (12 m).[19]

The doorway to the sanctum is 33 feet (10 m) high.[16] The wall at the entrance features sculptures of apsaras, ganas (attendants of Shiva) and river goddesses.[19]

The temple walls are window-less and are made of large sandstone blocks. The pre-restoration walls did not have any cementing material. The northern, southern and eastern walls feature three balconies, which rest on massive brackets. These are faux balconies that are purely ornamental. They are not approachable from either inside or outside of the temple, because they are located high up on the walls, and have no openings on the interior walls. The northern wall features a makara-pranala, which provided a drainage outlet for the liquid used to bathe the lingam.[16] Other than the sculptures on the front wall, this makara sculpture is the only carving on the external walls.[9] 8 images of goddesses were originally placed high up on the four interior walls (two on each wall); only one of these images now remains.[19]

• 
  Gana sculpture
• 
  Lingam in the sanctum
• 
  Sculptures at the entrance
• 
  Makara-pranala (drainage spout)
• 
  Faux balcony
• 
  View from the ground level

The four brackets supporting the cornerstones feature four different divine couples: Shiva-Parvati, Brahma-Shakti, Rama-Sita, and Vishnu-Lakshmi. A single couple appears on all the three faces of each bracket.[19]

While the superstructure remains incomplete, it is clear that the shikhara (dome tower) was not intended to be curvilinear. According to Kirit Mankodi, the shikhara was intended to be a low pyramid-shaped samvarana roof, usually featured in the mandapas.[19] According to Adam Hardy, the shikhara probably intended to be of phamsana (rectilinear in outline) style, although it is of bhumija (Latina or curvilinear in outline) style in its detailing.[20]

The incomplete but richly carved dome is supported by four octagonal pillars, each 39.96 feet (12.18 m) high.[21][18] Each pillar is aligned with 3 pilasters. These 4 pillars and 12 pilasters are similar to the navaranga-mandapas of some other medieval temples, in which 16 pillars were organized to make up 9 compartments.[19]

The remnants of a sloping ramp can be seen on the north-eastern corner of the building. The ramp is built of sandstone slabs, each measuring 39 x 20 x 16 inches. The slabs are covered with soil and sand.[11] The ramp itself is 300 feet (91 m) long, and slopes upwards to a height of 40 feet (12 m). Originally, the ramp reached up to the temple wall, but currently, a gap exists between the two.[7]

There is a small museum dedicated to Bhojeshwar Shiva Temple and it is situated nearly 200 meters from the main temple. The museum depicts the history of Bhojeshwar Temple through posters and sketches. The museum also describes the reign of Bhoja and important books written by him as well as the mason marks. There is no entry fee in the museum and the museum is open for visitors from 10:00 AM to 5:00 PM.

The monument is now under the protection of the Archaeological Survey of India (ASI).[22] Because of its proximity to the state capital Bhopal (28 km), it attracts a considerable number of tourists. In 2015, the site received the National Tourism Award (2013–14) for the "Best maintained and Disabled Friendly Monument".[23]

Despite being unfinished, the temple is in use for religious purposes. On Maha Shivaratri, thousands of devotees visit the temple.[24][25] The Government of Madhya Pradesh organises the Bhojpur Utsav cultural event at the site every year around Maha Shivaratri.[26] Past performers at the event include Kailash Kher,[27] Richa Sharma, Ganna Smirnova,[26] and Sonu Nigam.[28]

• Media related to Bhojeshwar Temple at Wikimedia Commons