Boom barrier

A boom barrier, also known as a boom gate, is a bar, or pole pivoted to allow the boom to block vehicular or pedestrian access through a controlled point.[1] Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions. Some boom gates also have a second arm which hangs 300 to 400 mm below the upper arm when lowered, to increase approach visibility, and which hangs on links so it lies flat with the main boom as the barrier is raised. Some barriers also feature a pivot roughly half way, where as the barrier is raised, the outermost half remains horizontal, with the barrier resembling an upside-down L when raised.

This article is about barriers for land vehicles. For chains or other barriers to block rivers or harbours, see boom (navigational barrier).
Not to be confused with a crossbuck, which often accompanies a boom barrier.
Boom barriers in the Netherlands.

Automatic boom barrier
Automatic boom barriers at a level crossing in New South Wales, Australia.
Manually-operated boom barrier at a level crossing in Buenos Aires, 1948.

There are various technologies for an automatic boom barrier. One of them is electro-mechanical, which is widely used due to its reliability. The other technologies are often manufacturer specific. These electro-mechanical devices come with 24VDC drive units which can run continuously without generating heat, so electro-mechanical boom barriers can be operated continuously and in an intensive duty cycle.

Operation of automatic boom barrier

An automatic boom barrier can be operated through:

  • Push button
  • Remote control
  • RFID tags / RFID reader
  • Loop detectors
  • Opto-electronic sensors
  • Any third party access control device

Usage

Boom gates are typically found at level crossings, drawbridges, parking facilities, checkpoints and entrances to restricted areas. They are also the usual method for controlling passage through toll booths, and can also be found on some freeway entrance ramps which are automatically controlled to drop to restrict traffic in the event of accident cleanup or road closures without the need to dispatch road workers or law enforcement to use a vehicle to block the way. Some boom gates are automatic and powered, others are manually operated. Manual gates are sometimes hung in the manner of a normal gate (i.e. hinged horizontally). In some places, boom gates are installed across suburban streets as a traffic calming measure, preventing through traffic, while allowing authorised vehicles such as emergency services and buses to take advantage of the shorter and more direct route.

See also

References
  1. Chaudhuri, Monalisa (2018-07-02). "Boom barrier to jaywalking". Retrieved 2019-03-17.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.