CCGS Terry Fox

Terry Fox is 88 metres (289 ft) long overall and 75 metres (246 ft) between perpendiculars. She has a beam of 17.82 metres (58 ft) and draws 8.3 metres (27 ft) of water when fully laden.[2]

While the crew's common spaces such as mess rooms and lounges are arranged on the main deck,[7] the accommodation is arranged in the box-shaped deckhouse. In the Canadian Coast Guard service, Terry Fox has a complement of 10 officers and 14 crew, and 10 additional berths.[2] The towing gear consists of an 80-ton winch holding 1,500 metres (1,600 yd) of wire and a separate 200-ton double-drum anchor-handling winch.[11] Unlike her sister ship, Terry Fox has not been retrofitted with a helideck. However, her cargo-handling capability has been increased with a 40-tonne cargo crane and a 490 m³ (17,000 cu ft) cargo hold in place of the original bulk cargo tanks.[4]

Terry Fox has a diesel-mechanical propulsion system consisting of four main engines driving two shafts through twin input-single output gearboxes. The prime movers are eight-cylinder Stork-Werkspoor 8TM410 medium-speed diesel engines producing 5,800 hp (4,300 kW) at 600 rpm in continuous service. Each pair of main engines is coupled to a Lohmann & Stolterfoht Navilus GVE 1500 A single-stage reduction gearbox via flexible couplings designed to automatically disengage if the propellers are blocked by ice. However, each propeller shaft is also fitted with a heavy flywheel 3 metres (10 ft) in diameter and 0.6 metres (2 ft) in thickness to increase rotational inertia and absorb shocks from propeller-ice interaction. Unlike the other Canadian offshore icebreakers built in the 1980s, Terry Fox does not have a propeller nozzles to shroud her propellers.[9] Her 4.8-metre (16 ft) LIPS Canada nickel aluminium bronze controllable pitch propellers are designed to transmit 9,564 hp (7,132 kW) of power per shaft to the water and produce a combined static bollard pull of about 1,590 kilonewtons (162 t_f). For onboard electricity production, the ship has two 750 kW (1,010 hp) Caterpillar 3512 series[4] ship service diesel generators and a single 200 kW (270 hp) Caterpillar 3406 DITA emergency diesel generator. In addition, both reduction gearboxes are fitted with clutched power take-offs for 1,250 kVa shaft alternators that supply power to the stern thruster and air bubbling system compressors.[8][11][13]

In line with her original Canadian Arctic Shipping Pollution Prevention Regulations (CASPPR) Arctic Class 4 rating, Terry Fox is designed to break at least 4-foot (1.2 m) first-year level ice with a continuous speed of 3 knots (5.6 km/h; 3.5 mph). During icebreaking operations, the ice friction is reduced by lubricating the hull-ice interface with a 750 kW (1,010 hp) low-pressure air bubbling system developed by Wärtsilä.[14] In open water, the system can also act as a bow thruster and used for maneuvering together with the ship's single centerline rudder and a 500 horsepower (370 kW) transverse stern thruster. When operating in ice-free waters, the ship was designed transit at an economical speed of about 14 knots (26 km/h; 16 mph) with just two main engines,[13] but her maximum speed is quoted as 16 knots (30 km/h; 18 mph).[4]

Between 1983 and 1990, BeauDril's mobile drilling units drilled a total of nineteen exploratory wells in the Canadian part of the Beaufort Sea with the support of Terry Fox and other icebreaking vessels: nine with the Mobile Arctic Caisson Molikpaq and ten with the Conical Drilling Unit Kulluk. Twelve wells alone were drilled in the Amauligak prospect, the most significant oil and gas field discovered in the region, but the high expectations for the Beaufort Sea were not met: the area was characterized by a large number of small, widely scattered resources. Molikpaq was mothballed after completing the last well in 1990.[15][16]

On 1 November 1991, Terry Fox was leased to the Canadian Coast Guard for two years to replace the decommissioned CCGS John A. MacDonald during the extensive modernization of CCGS Louis S. St-Laurent. During the leasing period, the icebreaker was found to meet Canadian Coast Guard's needs satisfactorily, and the vessel was purchased from Gulf Canada Resources on 1 November 1993.[17][18] Around the same time, the majority of BeauDril's fleet was purchased by Canadian Marine Drilling (Canmar), the drilling subsidiary of Dome Petroleum (later Amoco Canada) that had been Gulf Canada's main competitor in the Beaufort Sea for more than a decade.[19]

Under the Canadian Coast Guard, CCGS Terry Fox is classified as a heavy icebreaker.[2] She is homeported in St. John's, Newfoundland and Labrador and operates in the Gulf of St. Lawrence during the winter ice season and in Canada's eastern Arctic during the summer shipping season, assisting in escorting the annual Arctic summer sealift to coastal communities.

In 2014, Terry Fox and Louis S. St-Laurent travelled to the Canadian Arctic to map the undersea continental shelf.[20] In August, they became the first Canadian government ships to reach the North Pole in 20 years.[21]

Terry Fox ran aground in April 2018 near Bide Arm but managed to return to port under her own power.[22]

While Terry Fox has been scheduled for decommissioning in 2020,[23][24] the repeated delays[25] of the proposed polar icebreaker CCGS John G. Diefenbaker may postpone this. As of 2019, the Canadian Coast Guard has no other newbuilding plans approved as a potential replacement for the 1983-built heavy icebreaker.[26]