Car tuning

Since their invention, cars have always been subject to aftermarket modification. Both moderate and radical modification have been commemorated in the popular songs Hot Rod Race and Hot Rod Lincoln. The names of Abarth and Cooper appear on models styled after the cars they modified. With support from Ford, renowned engine manufacturer Cosworth went from modifying English Flathead engines for Lotus Sevens to dominating Formula One racing.

In the 1970s and 1980s, many Japanese performance cars were never exported outside the Japanese domestic market. In the late 1980s and early 1990s, grey import vehicles of Japanese performance cars, such as the Nissan Skyline,[1][2][3] began to be privately imported into Western Europe and North America. In the United States, this was in direct contrast to domestic car production around the same time, where there was a very small performance aftermarket for domestic compact and economy cars; the focus was instead on sports cars or muscle cars such as the Ford Mustang and Chevrolet Corvette.

Because of their light weight and the increasing availability of inexpensive tuning equipment, tuned economy and compact cars exhibit high performance at a low cost in comparison to dedicated sports cars. As professional sporting and racing with such vehicles increased, so did recreational use of these vehicles. Drivers with little or no automotive, mechanical, or racing experience would modify their vehicles to emulate the more impressive versions of racing vehicles, with mixed results.

The essence of modification of a tuner car is an attempt at a significant performance increase—or the appearance of high performance—from a stock motor vehicle through the addition, alteration or outright replacement of parts. Although this largely involves modifying the engine and management systems of the vehicle to increase power output, additional changes are often required to allow the vehicle to handle such power, including stiffened suspension, widened tires, better brakes, and improved steering and transmission modifications (such as the installation of a short shifter). Although largely insignificant in terms of appearance, certain modifications such as low-profile tires, altered suspension, and the addition of spoilers can change the overall appearance of the car, as well as adding downforce to increase traction.

Body tuning

Body tuning involves making modifications to the body of the car in order to alter the aesthetics of the car, improve performance, or both. Body tuning can also involve changing or replacing parts for better aerodynamic performance. Through downforce, cornering speeds and tire adhesion can be improved, often at the expense of increased drag. To lighten the vehicle, bodywork components such as hoods and rearview mirrors may be replaced with lighter-weight components.

A Lamborghini Aventador equipped with a Liberty Walk widebody kit and aftermarket wheels.

Often, body modifications are done mainly to improve a vehicle's appearance, as in the case of non-functioning scoops, wide arches or other aesthetic modification. Aftermarket spoilers or body kits rarely improve a car's performance. The majority, in fact, add weight and increase the drag coefficient of the vehicle, thus reducing its overall performance.

Dating back to the 1940s, chopping and channeling was a popular method of modifying a car's aerodynamics.

Increasing the wheel track width through spacers and wide body kits, or lowering the center of gravity via suspension modifications, can enhance the car's cornering ability. Often, suspension tuners unfamiliar with spring dynamics will cut stock springs, producing a harder, bouncy ride. It is also common to stance a car, lowering it beyond its optimal ride height purely for appearance.

Competition cars may have lightweight windows, or the windows may be completely removed, as auto glass adds significant weight and detrimentally alters weight distribution. Plastic windows are much more vulnerable to scratches, which reduce service life.

Modified cars can be significantly different from their stock counterparts. A common factor among owners/modifiers is to emulate the visual and/or performance characteristics of established styles and design principles. These similarities may be unintentional. Some of the many different styles and visual influences to car modification are:

An example of a Rat rod style car

• Rat rod: Style of hot rod and custom cars, imitating the "unfinished" appearance of some hot rods in the 1940s, 1950s, and 1960s. "Rat style" also defines a car that is kept on the road despite visible heavy wear.
• Euro style: Stanced with one-off paint and small wheels, with shaved features to define car body lines.
• Lowrider: Hydraulic or airbag suspension setups, custom paint, pinstriping, custom interior, and, typically, small diameter wire wheels. Others may look like straight restorations, aside from a low stance.
• Import or JDM: Japanese-style vehicles, aftermarket parts and race details.
• Dub or donk: Characterized by extremely large, ostentatious wheels with low-profile tires, loud speaker setups, and abnormally high ride height.
• Slab: Originated in the Houston area since the mid-1980s—usually, a full-size American luxury car is fitted with custom "elbows", a type of extended wire wheels which protrude out from the fenders, loud speaker setups, and neon signage inside the trunk panel. Other "slab" modifications include hydraulic-actuated trunk panels (a "pop trunk"), candy paint, vertical stainless steel trim on the trunk panel (known as "belt buckles"), aftermarket grille, and the use of a Cadillac front-end sheet metal conversion. The interiors of slabs are usually clad in beige or tan (in what is called a "peanut butter interior"). Usually associated with Houston hip hop music.
• Bōsōzoku: This Japanese motorbike style features additional fairings and exaggerated exhausts.
• VIP style: A Japanese style of customizing luxury cars that evolved from Bōsōzoku.
  

  A stanced MK3 Volkswagen Polo with aftermarket air suspension, light blue paint and BBS RM wheels with negative camber.
• Stanced: This style is mostly associated with sports and passenger cars with lowered suspension setups. Custom wheels with low-profile tires play a large role in this style and often feature aggressive sizes, offsets, and camber.
• Cal look: A modified classic Volkswagen intended to evoke California through the use of bright colours, trim, and accessories.
• Military/service style: Cars designed to look like certain service vehicles.
• Hot rod: Style largely consisting of period-specific vehicles, components, and finishes to reproduce characteristics of early drag cars from the 1930s and 1940s.
• Custom car: Cars built primarily to show off.
• Sleeper: Stock-looking cars with performance upgrades.
  

  A Nissan 350Z modified for drifting.
• Rally car: Cars built to compete in rallies.
• Drift car: Cars engineered for drifting.
• Drag car: Cars modified for straight-line speed and acceleration.
• South London look: Subtly modified 50's-70's British Fords that are lowered, with pastel paint and 13 inch Lotus Cortina steel wheels or RS, Minilite, or Revolution mag wheels. These cars often use a tuned Ford Kent or Pinto engine.
• German look: A Volkswagen Type 1, Type 3, or Karmann Ghia lowered and fitted with late model Porsche mag wheels and touring car-influenced styling. Heavily modified suspension and drivetrain with emphasis on handling and cornering.

30 roll

A two-car straight-line race, often between tuned cars, starting from a steady 30 mph speed where the two drivers stand side-by-side, before one of them signals the rolling start by honking 3 times. The acceleration test ends at a pre-defined speed, e.g. 60 mph or 80 mph.

Backfire

Combustion of fuel in the intake or exhaust system instead of the combustion chamber, resulting in a distinctive popping sound and occasional flames. For clarity, the term "afterfire" is sometimes used to refer to ignition within the exhaust, with "backfire" referring to intake fuel ignition.

BOV (blow-off valve)

A valve that releases pressure in turbocharged engines when the throttle is closed, to avoid damage to the intake system and improve reliability. A BOV can vent either to the intake system prior to the turbocharger (this type of BOV is essentially silent and known as "recirculating"). Other BOVs vent to the atmosphere, resulting in an easily identifiable hissing sound upon release of the throttle.

CAI (cold air intake)

A modified replacement intake system, often bypassing the stock airbox, meant to supply the engine with cold air from outside of the car (as opposed to hot air from under the bonnet). On most modern cars, the stock inlet ducts have been developed for peak performance and efficiency using advanced flow simulations, making aftermarket intake performance gain negligible. CAIs are instead mostly associated with their increased induction noise; coupled with an atmosphere-venting BOV on turbocharged cars and a non-resonated and sometimes "decat" exhaust, such a setup is preferred by owners interested primarily in increasing the noise level of their cars, resulting in modifications with little to no performance benefit.

Catback

The portion of the exhaust system downstream from the catalytic converter.

Custom tune

A tune that has been customized for a particular car, often modified in specific ways that require adjustments to the stock calibration.

Decat

A straight exhaust pipe without a catalytic converter. On some vehicles, decat pipes allow flames to be visible at the exhaust tips upon throttle closure.

Dig

A race beginning from a standing start, e.g. from a traffic light.

Dyno

Slang for dynamometer.

E-tuner

A tuner working remotely to provide custom tunes over the internet, usually after the customer sends data logs of performance tests in the form of pulls (see below).

FENG (fake engine noise generator)

Often called a "syntonizer", a system, either acoustic or electronic, that diffuses engine noise into the cockpit to enhance the driving experience. On some cars, like the 2015-18 Ford Focus RS, the noise is synthesized by a computer and bears no real relation to the noise generated by the engine. On other cars, the noise is conveyed by an acoustic pipe from the engine bay to the cockpit.

FMIC (front-mounted intercooler)

The term comes from the Subaru Impreza, which has its intercooler mounted in an unusual location just behind its engine. Beyond a certain threshold of power-increasing modifications, the small and ill-placed intercooler becomes ineffective, and a popular modification to overcome this limitation is to install an aftermarket intercooler in the conventional position behind the front bumper, giving rise to the term FMIC.

Forging

Replacing some of the engine's bottom-end internal elements with forged ones. The most common forged parts include connecting rods and pistons. Stage 3 cars can sometimes include a forged crankshaft. Forged parts are usually lighter and stronger than stock cast parts.

Fully bolted

Used to describe a car which has the maximum range of bolted-on engine upgrades without extensive modifications. These include aftermarket intakes, intercoolers, exhaust pipes, and mufflers.

Hub dyno

A chassis dynamometer with brakes that are connected directly to the driven wheel hubs after the wheels have been removed. They are more accurate than rolling road dynos, as they eliminate one significant source of slippage—the tires. Hub dynos are also more compact, the hub brakes being the size of small washing machines.

Log

A recording of the car or engine operating parameters (e.g. RPM, boost pressure, various temperatures) made when the car is being driven.

Map

A calibration for the engine management system, an electronic system known interchangeably as PCM (Powertrain Control System) or ECU (Engine Control Unit). A map is essentially a data file that gives the PCM the elements it needs to operate the engine according to the standards set by the manufacturer. The data is mostly organized in lookup tables known as "maps", and the set of tables and other parameters is referred to as a "map" or "calibration".

Methanol injection

A water injection system where a mixture of deionized water and a certain proportion of methanol is injected in the intake air stream as an anti-knock, usually using a dedicated pump and reservoir, and where the unmetered injection is triggered by a pressure switch activated once a certain boost level is reached on forced-induction engines. In some cases, the windscreen washer fluid reservoir is used as a tank for the water injection system (and still functions as usual). Water injection is believed to have appeared shortly before WWII on aero engines; notably, the Rolls-Royce Merlin and the Junkers Jumo 210 engines following the pre-WWII work of Sir Harry Ricardo. The methanol in the mixture injected in aero engines was present strictly as an anti-freeze, as it reduces the effectiveness of water as an anti-knock adjuvant.

OTS (off-the-shelf) map

A readily available tune sold with the accessory used to flash tunes to a car's engine control unit. OTS maps typically offer modest performance improvements and are often used as bases for further modifications.

Pull

A full-throttle RPM sweep in a straight line on a level road or a rolling road dynamometer, usually in 3rd or 4th gear and from low RPMs all the way to the engine rev limiter. Pulls are made to record logs or to measure engine output on a chassis dynamometer.

Resonator

A noise-reduction device that the exhaust pipe usually runs straight through, which dampens sound waves by the means of sound absorption material placed around a perforated tube section. Exhaust systems equipped with resonators are said to be "resonated", as opposed to "non-resonated" for those without such devices.

Rolling road

A chassis dynamometer which includes a metered brake that allows torque measurements, as well as speed measurements, which measure the torque and power produced at the wheels. Together with the inferred transmission ratio and a number of corrections related to atmospheric conditions and friction and losses, the software associated with the dyno can produce estimates of the flywheel power and torque figures.

Stage 0

The state of a car with no performance modifications.

Stage 1

The state of a car after simple modification, which can be just a tune, or a tune with simple supporting modifications such as an aftermarket air filter or intake. Stage 1 implies a modest power/torque increase over stock.

Stage 2

The state of a car after another round of modifications. Typically, stage 2 cars are fully bolted with a tune targeting higher torque and power, plus optional forging.

Stage 3

The state of a car with extensive mechanical modifications made to the powertrain, including (but not limited to) a bigger forced induction system, forged internals, retooling of cylinder heads, and fuel system modifications. Sometimes an aftermarket or motorsport ECU calibrated specifically for the car in question will be fitted. The power and torque outputs at this stage are significantly higher than stock, often prompting supporting modifications to the transmission and drivetrain.

Stock map

The OEM engine map.

TMIC (top-mounted intercooler)

An intercooler located above or just behind the engine, which benefits from a slight decrease in turbo lag but suffers from a maximum power threshold.

Tune

A modified map, most often aimed at increasing the engine torque and power output. A tune is "flashed" to the PCM or ECU either by the tune vendor or the end-user itself, often using a stand-alone accessory connected to the car's OBDII connector or through a portable computer. A tune typically voids the powertrain warranty unless sanctioned by the car manufacturer (which is a rare occurrence). Typical changes include ignition timing, fuel flow, wastegate control for turbo engines, and modified limits such as those for RPM and boost.

Tuner

An individual or company creating tunes, usually for profit, and often selling supporting elements such as intakes and exhausts.

Turboback

The entire exhaust system downstream from the turbocharger turbine, composed of the downpipe (including the catalytic converter) and the catback portion.

Turbo lag

The delay between the initial throttle opening and the moment the turbocharger has spooled up sufficiently to deliver significant boost pressure and the associated torque and power increase. On stock modern turbos, lag is usually below one second, while some large aftermarket turbos exhibit lags of two seconds or more.

Many countries or municipalities have legal requirements which govern vehicle modifications. For example, all vehicles in Victoria, Australia, must conform to construction standards to ensure vehicle safety.[4] There are also restrictions for P Plate drivers which can prevent young drivers from driving modified vehicles.[5]

Many developed countries have smog regulations, which generally forbid any modifications to engines or related components unless the modifications themselves are certified, like production car models. Such modifications, even if they do not actually result in increased emissions, prevent legal use on public roads.[6]

Many organizations involved in competitive motorsports establish safety guidelines that far exceed legal requirements placed on street-legal vehicles. The NHRA, IHRA and SOLO all require that vehicles pass inspection to ensure that all regulations are being complied with.

• Air-fuel ratio meter
• Automotive aftermarket
• Automotive restoration
• Chrome plating
• Electric vehicle conversion
• Green tuning
• SEMA
• Shift kit
• Uberdata
• Veilside
• Virtual tuning