Cathay Pacific Flight 780

The aircraft involved in the accident was an Airbus A330-342, registration B-HLL, manufacturer's serial number (MSN) 244, fitted with Rolls-Royce Trent 772-60 engines. It first flew on 4 November 1998 and was delivered to Cathay Pacific three weeks later on 25 November 1998.[3] This aircraft was configured for a capacity of 311 passengers and 13 crew, with 44 business class seats and 267 economy class seats.

After the incident, it was bought by DVB Bank in July 2011 (Arena Aviation Capital since March 2017) and was transferred to Dragonair (Cathay Dragon) since 23 April 2012, and was reconfigured for a capacity of 307 passengers, with 42 business class seats and 265 economy class seats in 2013. It was also repainted into the new Cathay Dragon livery on 3 November 2017. The aircraft has also had another incident 6 years later as flight KA691 from Hong Kong to Penang on 8 September 2016, with 295 passengers and crew on board, when an airport delivery van crashed onto the aircraft's left engine.

The aircraft was withdrawn from service on August 13, 2020, in the expiration of its lease, after its last commercial flight from Beijing to Hong Kong as KA993, and its final flight was on October 14, 2020, to Pinal Airpark in Marana, Arizona via Anchorage as KA3496.

Cathay Pacific Flight 780 departed from stand 8 at Juanda International Airport. It took off from runway 28 at 08:24 local time (01:24 UTC). During the climb, both engines experienced small engine pressure ratio (EPR) fluctuations, with No. 2 engine fluctuating over a greater range than No. 1.[3] Just over half an hour after takeoff, at a cruising altitude of flight level 390 (about 39,000 feet (12,000 m) above sea level), the electronic centralised aircraft monitoring (ECAM) system displayed an "ENG 2 CTL SYS FAULT" error message.[3] The crew contacted maintenance control (MC) to discuss the fluctuations. As other engine operating parameters on both engines were normal, it was determined to be safe to continue the flight.[3]

Almost two hours after departure, at 03:16 UTC, the "ENG 2 CTL SYS FAULT" ECAM message reappeared. The crew contacted Maintenance Control to review the issue. As all other engine parameters remained normal, it was deemed safe to continue on to Hong Kong.

After another two hours elapsed, the aircraft was on descent to Hong Kong when, at 05:19 UTC, about 203 kilometres (126 mi; 110 nmi) southeast of Chek Lap Kok Airport, the aircraft's ECAM displayed "ENG 1 CTL SYS FAULT" and "ENG 2 STALL" within a short period.[3] The second message signified an engine compressor stall, a potentially serious engine problem. The flight crew accordingly carried out the necessary ECAM actions with No. 2 engine's thrust lever moved to the idle (or minimum-thrust setting) position. The crew set No. 1 engine to maximum continuous thrust to compensate for the low thrust of No. 2 engine. Following these actions, the crew declared a "pan-pan" with Hong Kong air traffic control, requesting the shortest possible route to the airport and priority landing.[3]

A few minutes later, approximately 83 kilometres (52 mi; 45 nmi) southeast of Chek Lap Kok, the aircraft was in a descent and approaching an altitude of 8,000 feet (2,438 m) when an "ENG 1 STALL" ECAM message was annunciated. The flight crew carried out the actions for a No. 1 engine compressor stall and declared a "mayday." The captain then moved the thrust levers to test engine responses. No. 1 engine's rotational fan speed slowly spooled up to about 74% N₁, while No. 2 engine remained running at sub-idle speed, about 17% N₁, providing sufficient thrust to level off at 5,500 feet and reach Hong Kong. As the flight approached the airport, the crew found that movement of the thrust levers failed to reduce thrust below 74% N₁ on No. 1 engine.[3]

At 13:43 hours local time (05:43 UTC), 11 minutes after declaring the "mayday", the Airbus touched down hard on runway 07L (length 3800 m; 12,470 ft) at a groundspeed of 426 kilometres per hour (265 mph; 230 kn),[3] 176 kilometres per hour (109 mph; 95 kn) over the normal touchdown speed for an A330[6][7] and above both the maximum allowable flap-extension speed of the A330-300 and the speed rating of the tyres.[7][8] The plane ricocheted and briefly became airborne again until it slammed down hard banking left, causing the left engine to scrape against the runway surface. Both wing spoilers deployed automatically. Only No. 1 engine's thrust reverser deployed and activated with the right engine’s thrust reverser unresponsive due to a technical snag, forcing the crew to bring the aircraft to a stop using manual braking. No. 1 engine remained at between 70% and 80% N₁ until the crew shut down both engines upon coming to a stop.

Five of the aircraft's eight main wheel tires deflated. Airport firefighters reported that smoke and flames were emanating from the landing gear.[3] The captain ordered an emergency evacuation, during which 57 passengers were injured, of whom 10 were transported to the hospital.[3]

Investigators from the Hong Kong Civil Aviation Department, the Bureau d'Enquêtes et d'Analyses pour la Sécurité de l'Aviation Civile (BEA) of France, and the Air Accidents Investigation Branch (AAIB) of the United Kingdom formed a team to investigate the accident. The National Transportation Safety Committee (NTSC) of Indonesia and the National Transportation Safety Board (NTSB) of the United States of America were also involved in the investigation, as were representatives of Airbus, Rolls-Royce, and Cathay Pacific.[3]

Data from the digital flight data recorder, cockpit voice recorder, and quick access recorder were downloaded for analysis. The investigation concentrated on the engines, the engine control systems, and the fuel system.[3]

Analysis of the engines found that their fuel systems were contaminated with spherical particles. The Hong Kong Civil Aviation Department Accident Investigation Division concluded that the accident was caused by these spherical particles.[9] The contaminated fuel, which contained particles of superabsorbent polymer (SAP) introduced into the fuel system when the aircraft was fueled at Surabaya, subsequently caused the loss of thrust control on both engines of the aircraft during approach to Hong Kong.

The SAP particles, a component of the filter monitors installed in a fueling dispenser at Juanda Airport, had caused the main metering valves of the fuel metering unit to seize. The valves were found to be stuck in positions corresponding to the recorded thrust output of each engine as it approached Hong Kong.[1] Other engine components were found to be contaminated with the particles, while the variable stator vane controller of engine No. 2 was found to be seized. The entire fuel system, including the fuel tanks, was found to be contaminated with spherical particles.[1]

Fuel samples collected at Juanda International Airport were contaminated with the particles.[1] The fuel supply pipeline system used to refuel aircraft at Juanda International Airport had been recently extended during construction of new aircraft parking bays. The investigation discovered that not all procedures had been followed when the system was brought back into service.[1]

The incident was featured in the first episode of Season 19 for the Canadian TV series Mayday labeled "Deadly Descent".

TVB also featured this case in the ending of their TV Drama Triumph in the Skies II which aired in July 2013.

• British Airways Flight 38, a Boeing 777 that lost engine power shortly before a 2008 crash-landing at London Heathrow Airport.
• Air Transat Flight 236, an Airbus A330-200 that had fuel starvation before landing safely at Lajes Air Base in the Azores.
• British Airways Flight 9, a Boeing 747-200
• Qantas Flight 72, a Airbus A330-300