Connect Four

Connect Four (also known as Four Up, Plot Four, Find Four, Four in a Row, Drop Four, and Gravitrips in the Soviet Union) is a two-player connection board game, in which the players choose a color and then take turns dropping colored discs into a seven-column, six-row vertically suspended grid. The pieces fall straight down, occupying the lowest available space within the column. The objective of the game is to be the first to form a horizontal, vertical, or diagonal line of four of one's own discs. Connect Four is a solved game. The first player can always win by playing the right moves.

Connect Four
Connect 4 game board and box
Designer(s)Howard Wexler[1]
Ned Strongin[2]
Publisher(s)Milton Bradley / Hasbro
Publication date1974 (1974)
Genre(s)Connection game
Players2
Playing time1 - 10 minutes
Age range6+

The game was first sold under the Connect Four trademark[3] by Milton Bradley in February 1974.

Gameplay
Gameplay of Connect Four

Object: Connect four of your checkers in a row while preventing your opponent from doing the same. But, look out -- your opponent can sneak up on you and win the game!

— Milton Bradley, Connect Four "Pretty Sneaky, Sis" television commercial, 1977[4]

A gameplay example (right), shows the first player starting Connect Four by dropping one of their yellow discs into the center column of an empty game board. The two players then alternate turns dropping one of their discs at a time into an unfilled column, until the second player, with red discs, achieves a diagonal four in a row, and wins the game. If the board fills up before either player achieves four in a row, then the game is a draw.

Mathematical solution

Connect Four is a two-player game with perfect information for both sides. This term describes games where one player at a time plays, players have all the information about moves that have taken place and all moves that can take place, for a given game state. Connect Four also belongs to the classification of an adversarial, zero-sum game, since a player's advantage is an opponent's disadvantage.

One measure of complexity of the Connect Four game is the number of possible games board positions. For classic Connect Four played on 6 high, 7 wide grid, there are 4,531,985,219,092 positions[5] for all game boards populated with 0 to 42 pieces.

The game was first solved by James Dow Allen (October 1, 1988), and independently by Victor Allis (October 16, 1988).[6] Allis describes a knowledge-based approach,[7] with nine strategies, as a solution for Connect Four. Allen also describes winning strategies[8][9] in his analysis of the game. At the time of the initial solutions for Connect Four, brute-force analysis was not deemed feasible given the game's complexity and the computer technology available at the time.

Connect Four has since been solved with brute-force methods, beginning with John Tromp's work in compiling an 8-ply database[6][10] (February 4, 1995). The artificial intelligence algorithms able to strongly solve Connect Four are minimax or negamax, with optimizations that include alpha-beta pruning, move ordering, and transposition tables. The code for solving Connect Four with these methods is also the basis for the Fhourstones[11] integer performance benchmark.

The solved conclusion for Connect Four is first player win. With perfect play, the first player can force a win,[6][7][8] on or before the 41st move[12] by starting in the middle column. The game is a theoretical draw when the first player starts in the columns adjacent to the center. For the edges of the game board, column 1 and 2 on left (or column 7 and 6 on right), the exact move-value score for first player start is loss on the 40th move,[12] and loss on the 42nd move,[12] respectively. In other words, by starting with the four outer columns, the first player allows the second player to force a win.

Rule variations

There are many variations of Connect Four with differing game board sizes, game pieces, and/or gameplay rules. Many variations are popular with game theory and artificial intelligence research, rather than with physical game boards and gameplay by persons.

The most commonly used Connect Four board size is 7 columns × 6 rows. Size variations include 5×4, 6×5, 8×7, 9×7, 10×7, 8×8, Infinite Connect-Four,[13] and Cylinder-Infinite Connect-Four.[14]

A travel version of the Milton Bradley game.

Several versions of Hasbro's Connect Four physical gameboard make it easy to remove game pieces from the bottom one at a time. Along with traditional gameplay, this feature allows for variations of the game.[15] Some earlier game versions also included specially marked discs, and cardboard column extenders, for additional variations to the game.[16]

PopOut
"PopOut" redirects here. For other uses, see Pop Out (disambiguation).

PopOut starts the same as traditional gameplay, with an empty board and players alternating turns placing their own colored discs into the board. During each turn, a player can either add another disc from the top or, if one has any discs of his or her own color on the bottom row, remove (or "pop out") a disc of one's own color from the bottom. Popping a disc out from the bottom drops every disc above it down one space, changing their relationship with the rest of the board and changing the possibilities for a connection. The first player to connect four of their discs horizontally, vertically, or diagonally wins the game.

Pop 10

Before play begins, Pop 10 is set up differently from the traditional game. Taking turns, each player places one of their own color discs into the slots filling up only the bottom row, then moving on to the next row until it is filled, and so forth until all rows have been filled.

Gameplay works by players taking turns removing a disc of one's own color through the bottom of the board. If the disc that was removed was part of a four-disc connection at the time of its removal, the player sets it aside out of play and immediately takes another turn. If it was not part of a "connect four", then it must be placed back on the board through a slot at the top into any open space in an alternate column (whenever possible) and the turn ends, switching to the other player. The first player to set aside ten discs of his or her color wins the game.

5-in-a-Row

The 5-in-a-Row variation for Connect Four is a game played on a 6 high, 9 wide, grid. Hasbro adds two additional board columns, already filled with player pieces in an alternating pattern, to the left and right sides of their standard 6 by 7 game board. The game plays similarly to the original Connect Four, except players must now get five pieces in a row to win. Notice this is still a 42-ply game since the two new columns added to the game represent twelve game pieces already played, before the start of a game.

Power Up

In this variation of Connect Four, players begin a game with one or more specially marked, "Power Checkers" game pieces, which each player may choose to play once per game. When playing a piece marked with an anvil icon, for example, the player may immediately pop out all pieces below it, leaving the anvil piece at the bottom row of the game board. Other marked game pieces include one with a wall icon, allowing a player to play a second consecutive non winning turn with an unmarked piece; a "×2" icon, allowing for an unrestricted second turn with an unmarked piece; and a bomb icon, allowing a player to immediately pop out an opponent's piece.

Other versions

Hasbro also produces various sizes of Giant Connect Four, suitable for outdoor use. The largest is built from weather-resistant wood, and measures 120 cm in both width and height. Connect Four was released for the Microvision video game console in 1979, developed by Robert Hoffberg. It was also released for the Texas Instruments 99/4 computer the same year.

With the proliferation of mobile devices, Connect Four has regained popularity as a game that can be played quickly and against another person over an Internet connection.

In 2007, Milton Bradley published Connect 4 Stackers. Instead of the usual grid, the game features a board to place colored discs on. Just like standard Connect 4, the object of the game is to try get 4 in a row of a specific color of discs.[17]

In 2008, another board variation Hasbro published as a physical game is Connect 4x4.[18] This game features a two-layer vertical grid with colored discs for four players, plus blocking discs. The object of the game is also to get 4 in a row for a specific color of discs.

A SpongeBob SquarePants version of the game was released in 2009 for the show's 10th anniversary. The rules are the same as the normal version, only the chips have the faces of SpongeBob and Patrick on them. It was re-released in 2014, but with Patrick being replaced with Plankton.

In 2013, Bay Tek Games created a Connect 4 ticket redemption arcade game under license from Hasbro. There are Standard and Deluxe versions of the game. Two players move and drop the checkers using buttons. If only one player is playing, the player plays against the computer. Both the player that wins and the player that loses get tickets. The player that wins gets to play a bonus round where a checker is moving and the player needs to press the button at the right time to get the ticket jackpot.

In 2015 Winning Moves published Connect 4 Twist & Turn. This game variant features a game tower instead of the flat game grid. The tower has 5 rings that twist independently. Gameplay is similar to standard Connect 4 where players try to get 4 in a row of their own colored discs. However, with Twist & Turn, players have the choice to twist a ring after they have played a piece. It adds a subtle layer of strategy to the gameplay.

In 2018, Bay Tek Games released their second Connect 4 arcade game, Connect 4 Hoops. Players throw basketballs into basketball hoops, and they show up as checkers on the video screen. The game can be played by 2 players, or by 1 player against the computer. Both the player that wins and the player that loses get tickets.

In 2018, Hasbro released Connect 4 Shots. This version requires the players to bounce coloured balls into the grid until one player achieves four in a row.

See also

References
  1. "A City College Toy Story". CUNY Matters. City University of New York. Winter 2001.
  2. "Obituary: Ned Strongin". The New York Times. April 18, 2011.
  3. "Connect Four". United States Patent and Trademark Office.
  4. "Connect Four - "Pretty Sneaky, Sis..." (Commercial, 1981)". YouTube. Retrieved December 18, 2016.
  5. Number of legal 7 X 6 Connect-Four positions after n plies, Online Encyclopedia of Integer Sequences
  6. "John's Connect Four Playground". Homepages. May 25, 2010.
  7. Allis, Victor, A Knowledge-based Approach of Connect-Four, Vrije Universiteit, October 1988
  8. Allen, James D., Expert Play in Connect-Four, 1990
  9. Allen, James D. (2010). The Complete Book of Connect 4: History, Strategy, Puzzles. Sterling Publishing Company. ISBN 978-1402756214.
  10. Tromp, John, Connect-4 Data Set, February 4, 1995
  11. Tromp, John, The Fhourstones Benchmark, 1992
  12. asun.net (2013). Four in a Row Solver [computer software]. Microsoft Corporation.
  13. Yamaguchi, Y.; K. Yamaguchi; T. Tanaka; T. Kaneko (2012). "Infinite Connect-Four is solved: Draw". Advances in Computer Games, ACG 2011. LNCS 7168: 208–219.
  14. Yamaguchi, Y.; K. Yamaguchi; T. Tanaka (2013). "Cylinder-Infinite-Connect-Four except for Widths 2, 6, and 11 is Solved: Drawn". The 8th International Conference on Computers and Games (CG2013).
  15. "C4 Classic Grid" (PDF). Hasbro Inc. 2012.
  16. "Connect 4" (PDF). Hasbro Inc. 2009.
  17. "Connect 4 Stackers" (PDF). Hasbro Inc. 2006.
  18. "Connect 4x4" (PDF). Hasbro Inc. 2008.
  19. Thair, David (May 22, 2009). "HIGNFY Guest interview: Stuart Maconie". Comedy Blog. BBC.
  20. "Nintendo Shares A Handy Infographic Featuring All 51 Worldwide Classic Clubhouse Games". Nintendo Life. Retrieved 2020-07-21.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.