Dominance (genetics)

Most animals and some plants have paired chromosomes, and are described as diploid. They have two versions of each chromosome, one contributed by the mother's ovum, and the other by the father's sperm, known as gametes, described as haploid, and created through meiosis. These gametes then fuse during fertilization during sexual reproduction, into a new single cell zygote, which divides multiple times, resulting in a new organism with the same number of pairs of chromosomes in each (non-gamete) cell as its parents.

Each chromosome of a matching (homologous) pair is structurally similar to the other, and has a very similar DNA sequence (loci, singular locus). The DNA in each chromosome functions as a series of discrete genes that influence various traits. Thus, each gene also has a corresponding homologue, which may exist in different versions called alleles. The alleles at the same locus on the two homologous chromosomes may be identical or different.

The blood type of a human is determined by a gene that creates an A, B, AB or O blood type and is located in the long arm of chromosome nine. There are three different alleles that could be present at this locus, but only two can be present in any individual, one inherited from their mother and one from their father.[7]

If two alleles of a given gene are identical, the organism is called a homozygote and is said to be homozygous with respect to that gene; if instead the two alleles are different, the organism is a heterozygote and is heterozygous. The genetic makeup of an organism, either at a single locus or over all its genes collectively, is called its genotype. The genotype of an organism, directly and indirectly, affects its molecular, physical, and other traits, which individually or collectively are called its phenotype. At heterozygous gene loci, the two alleles interact to produce the phenotype.

In complete dominance, the effect of one allele in a heterozygous genotype completely masks the effect of the other. The allele that masks the other is said to be dominant to the latter, and the allele that is masked is said to be recessive to the former.[8] Complete dominance, therefore, means that the phenotype of the heterozygote is indistinguishable from that of the dominant homozygote.

A classic example of dominance is the inheritance of seed shape (pea shape) in peas. Peas may be round (associated with allele R) or wrinkled (associated with allele r). In this case, three combinations of alleles (genotypes) are possible: RR and rr are homozygous and Rr is heterozygous. The RR individuals have round peas and the rr individuals have wrinkled peas. In Rr individuals the R allele masks the presence of the r allele, so these individuals also have round peas. Thus, allele R is completely dominant to allele r, and allele r is recessive to allele R.

This Punnett square illustrates incomplete dominance. In this example, the red petal trait associated with the R allele recombines with the white petal trait of the r allele. The plant incompletely expresses the dominant trait (R) causing plants with the Rr genotype to express flowers with less red pigment resulting in pink flowers. The colors are not blended together, the dominant trait is just expressed less strongly.

Incomplete dominance (also called partial dominance, semi-dominance or intermediate inheritance) occurs when the phenotype of the heterozygous genotype is distinct from and often intermediate to the phenotypes of the homozygous genotypes. For example, the snapdragon flower color is homozygous for either red or white. When the red homozygous flower is paired with the white homozygous flower, the result yields a pink snapdragon flower. The pink snapdragon is the result of incomplete dominance. A similar type of incomplete dominance is found in the four o'clock plant wherein pink color is produced when true-bred parents of white and red flowers are crossed. In quantitative genetics, where phenotypes are measured and treated numerically, if a heterozygote's phenotype is exactly between (numerically) that of the two homozygotes, the phenotype is said to exhibit no dominance at all, i.e. dominance exists only when the heterozygote's phenotype measure lies closer to one homozygote than the other.

When plants of the F₁ generation are self-pollinated, the phenotypic and genotypic ratio of the F₂ generation will be 1:2:1 (Red:Pink:White).[9]

See partial dominance hypothesis.

Co-dominance in a Camellia cultivar

A and B blood types in humans show co-dominance, but the O type is recessive to A and B.

This Punnett square shows co-dominance. In this example a white bull (WW) mates with a red cow (RR), and their offspring exhibit co-dominance expressing both white and red hairs.

Co-dominance occurs when the contributions of both alleles are visible in the phenotype.

For example, in the ABO blood group system, chemical modifications to a glycoprotein (the H antigen) on the surfaces of blood cells are controlled by three alleles, two of which are co-dominant to each other (I^A, I^B) and dominant over the recessive i at the ABO locus. The I^A and I^B alleles produce different modifications. The enzyme coded for by I^A adds an N-acetylgalactosamine to a membrane-bound H antigen. The I^B enzyme adds a galactose. The i allele produces no modification. Thus the I^A and I^B alleles are each dominant to i (I^AI^A and I^Ai individuals both have type A blood, and I^BI^B and I^Bi individuals both have type B blood), but I^AI^B individuals have both modifications on their blood cells and thus have type AB blood, so the I^A and I^B alleles are said to be co-dominant.

Another example occurs at the locus for the beta-globin component of hemoglobin, where the three molecular phenotypes of Hb^A/Hb^A, Hb^A/Hb^S, and Hb^S/Hb^S are all distinguishable by protein electrophoresis. (The medical condition produced by the heterozygous genotype is called sickle-cell trait and is a milder condition distinguishable from sickle-cell anemia, thus the alleles show incomplete dominance with respect to anemia, see above). For most gene loci at the molecular level, both alleles are expressed co-dominantly, because both are transcribed into RNA.

Co-dominance, where allelic products co-exist in the phenotype, is different from incomplete dominance, where the quantitative interaction of allele products produces an intermediate phenotype. For example, in co-dominance, a red homozygous flower and a white homozygous flower will produce offspring that have red and white spots. When plants of the F1 generation are self-pollinated, the phenotypic and genotypic ratio of the F2 generation will be 1:2:1 (Red:Spotted:White). These ratios are the same as those for incomplete dominance. Again, this classical terminology is inappropriate – in reality such cases should not be said to exhibit dominance at all.

While it is often convenient to talk about a recessive allele or a dominant trait, dominance is not inherent to either an allele or its phenotype. Dominance is a relationship between two alleles of a gene and their associated phenotypes. A "dominant" allele is dominant to a particular allele of the same gene that can be inferred from the context, but it may be recessive to a third allele, and codominant to a fourth. Similarly, a "recessive" trait is a trait associated with a particular recessive allele implied by the context, but that same trait may occur in a different context where it is due to some other gene and a dominant allele.

Dominance is unrelated to the nature of the phenotype itself, that is, whether it is regarded as "normal" or "abnormal," "standard" or "nonstandard," "healthy" or "diseased," "stronger" or "weaker," or more or less extreme. A dominant or recessive allele may account for any of these trait types.

Dominance does not determine whether an allele is deleterious, neutral or advantageous. However, selection must operate on genes indirectly through phenotypes, and dominance affects the exposure of alleles in phenotypes, and hence the rate of change in allele frequencies under selection. Deleterious recessive alleles may persist in a population at low frequencies, with most copies carried in heterozygotes, at no cost to those individuals. These rare recessives are the basis for many hereditary genetic disorders.

Dominance is also unrelated to the distribution of alleles in the population. Both dominant and recessive alleles can be extremely common or extremely rare.

Although any individual of a diploid organism has at most two different alleles at any one locus (barring aneuploidies), most genes exist in a large number of allelic versions in the population as a whole. If the alleles have different effects on the phenotype, sometimes their dominance relationships can be described as a series.

For example, coat color in domestic cats is affected by a series of alleles of the TYR gene (which encodes the enzyme tyrosinase). The alleles C, c^b, c^s, and c^a (full colour, Burmese, Siamese, and albino, respectively) produce different levels of pigment and hence different levels of colour dilution. The C allele (full colour) is completely dominant over the last three and the c^a allele (albino) is completely recessive to the first three.[12][13][14]

In humans and other mammal species, sex is determined by two sex chromosomes called the X chromosome and the Y chromosome. Human females are typically XX; males are typically XY. The remaining pairs of chromosome are found in both sexes and are called autosomes; genetic traits due to loci on these chromosomes are described as autosomal, and may be dominant or recessive. Genetic traits on the X and Y chromosomes are called sex-linked, because they are linked to sex chromosomes, not because they are characteristic of one sex or the other. In practice, the term almost always refers to X-linked traits and a great many such traits (such as red-green colour vision deficiency) are not affected by sex. Females have two copies of every gene locus found on the X chromosome, just as for the autosomes, and the same dominance relationships apply. Males, however, have only one copy of each X chromosome gene locus, and are described as hemizygous for these genes. The Y chromosome is much smaller than the X, and contains a much smaller set of genes, including, but not limited to, those that influence 'maleness', such as the SRY gene for testis determining factor. Dominance rules for sex-linked gene loci are determined by their behavior in the female: because the male has only one allele (except in the case of certain types of Y chromosome aneuploidy), that allele is always expressed regardless of whether it is dominant or recessive. Birds have opposite sex chromosomes: male birds have ZZ and female birds ZW chromosomes. However, inheritance of traits reminds XY-system otherwise; male zebra finches may carry white colouring gene in their one of two Z chromosome, but females develop white colouring always. Grasshoppers have XO-system. Females have XX, but males only X. There is no Y chromosome at all.

Epistasis ["epi + stasis = to sit on top"] is an interaction between alleles at two different gene loci that affect a single trait, which may sometimes resemble a dominance interaction between two different alleles at the same locus. Epistasis modifies the characteristic 9:3:3:1 ratio expected for two non-epistatic genes. For two loci, 14 classes of epistatic interactions are recognized. As an example of recessive epistasis, one gene locus may determine whether a flower pigment is yellow (AA or Aa) or green (aa), while another locus determines whether the pigment is produced (BB or Bb) or not (bb). In a bb plant, the flowers will be white, irrespective of the genotype of the other locus as AA, Aa, or aa. The bb combination is not dominant to the A allele: rather, the B gene shows recessive epistasis to the A gene, because the B locus when homozygous for the recessive allele (bb) suppresses phenotypic expression of the A locus. In a cross between two AaBb plants, this produces a characteristic 9:3:4 ratio, in this case of yellow : green : white flowers.

In dominant epistasis, one gene locus may determine yellow or green pigment as in the previous example: AA and Aa are yellow, and aa are green. A second locus determines whether a pigment precursor is produced (dd) or not (DD or Dd). Here, in a DD or Dd plant, the flowers will be colorless irrespective of the genotype at the A locus, because of the epistatic effect of the dominant D allele. Thus, in a cross between two AaDd plants, 3/4 of the plants will be colorless, and the yellow and green phenotypes are expressed only in dd plants. This produces a characteristic 12:3:1 ratio of white : yellow : green plants.

Supplementary epistasis occurs when two loci affect the same phenotype. For example, if pigment color is produced by CC or Cc but not cc, and by DD or Dd but not dd, then pigment is not produced in any genotypic combination with either cc or dd. That is, both loci must have at least one dominant allele to produce the phenotype. This produces a characteristic 9:7 ratio of pigmented to unpigmented plants. Complementary epistasis in contrast produces an unpigmented plant if and only if the genotype is cc and dd, and the characteristic ratio is 15:1 between pigmented and unpigmented plants.[15]

Classical genetics considered epistatic interactions between two genes at a time. It is now evident from molecular genetics that all gene loci are involved in complex interactions with many other genes (e.g., metabolic pathways may involve scores of genes), and that this creates epistatic interactions that are much more complex than the classic two-locus models.

The frequency of the heterozygous state (which is the carrier state for a recessive trait) can be estimated using the Hardy–Weinberg formula: ${\displaystyle p^{2}+2pq+q^{2}=1}$

This formula applies to a gene with exactly two alleles and relates the frequencies of those alleles in a large population to the frequencies of their three genotypes in that population.

For example, if p is the frequency of allele A, and q is the frequency of allele a then the terms p², 2pq, and q² are the frequencies of the genotypes AA, Aa and aa respectively. Since the gene has only two alleles, all alleles must be either A or a and p + q = 1. Now, if A is completely dominant to a then the frequency of the carrier genotype Aa cannot be directly observed (since it has the same traits as the homozygous genotype AA), however it can be estimated from the frequency of the recessive trait in the population, since this is the same as that of the homozygous genotype aa. i.e. the individual allele frequencies can be estimated: q = √f(aa), p = 1 − q, and from those the frequency of the carrier genotype can be derived: f(Aa) = 2pq.

This formula relies on a number of assumptions and an accurate estimate of the frequency of the recessive trait. In general, any real-world situation will deviate from these assumptions to some degree, introducing corresponding inaccuracies into the estimate. If the recessive trait is rare, then it will be hard to estimate its frequency accurately, as a very large sample size will be needed.

The property of "dominant" is sometimes confused with the concept of advantageous and the property of "recessive" is sometimes confused with the concept of deleterious, but the phenomena are distinct. Dominance describes the phenotype of heterozygotes with regard to the phenotypes of the homozygotes and without respect to the degree to which different phenotypes may be beneficial or deleterious. Since many genetic disease alleles are recessive and because the word dominance has a positive connotation, the assumption that the dominant phenotype is superior with respect to fitness is often made. This is not assured however; as discussed below while most genetic disease alleles are deleterious and recessive, not all genetic diseases are recessive.

Nevertheless, this confusion has been pervasive throughout the history of genetics and persists to this day. Addressing this confusion was one of the prime motivations for the publication of the Hardy–Weinberg principle.

Dominance typically occurs when one of the two alleles is non-functional at the molecular level, that is, it is not transcribed or else does not produce a functional protein product. This can be the result of a mutation that alters the DNA sequence of the allele. An organism homozygous for the non-functional allele will generally show a distinctive phenotype, due to the absence of the protein product. For example, in humans and other organisms, the unpigmented skin of the albino phenotype[16] results when an individual is homozygous for an allele that encodes a non-functional version of an enzyme needed to produce the skin pigment melanin. It is important to understand that it is not the lack of function that allows the allele to be described as recessive: this is the interaction with the alternative allele in the heterozygote. Three general types of interaction are possible:

1. In the typical case, the single functional allele makes sufficient protein to produce a phenotype identical to that of the homozygote: this is called haplosufficiency. For example, suppose the standard amount of enzyme produced in the functional homozygote is 100%, with the two functional alleles contributing 50% each. The single functional allele in the heterozygote produces 50% of the standard amount of enzyme, which is sufficient to produce the standard phenotype. If the heterozygote and the functional-allele homozygote have identical phenotypes, the functional allele is dominant to the non-functional allele. This occurs at the albino gene locus: the heterozygote produces sufficient enzyme to convert the pigment precursor to melanin, and the individual has standard pigmentation.
2. Less commonly, the presence of a single functional allele gives a phenotype that is not normal but less severe than that of the non-functional homozygote. This occurs when the functional allele is not haplo-sufficient. The terms haplo-insufficiency and incomplete dominance are typically applied to these cases. The intermediate interaction occurs where the heterozygous genotype produces a phenotype intermediate between the two homozygotes. Depending on which of the two homozygotes the heterozygote most resembles, one allele is said to show incomplete dominance over the other. For example, in humans the Hb gene locus is responsible for the Beta-chain protein (HBB) that is one of the two globin proteins that make up the blood pigment hemoglobin.[16] Many people are homozygous for an allele called Hb^A; some persons carry an alternative allele called Hb^S, either as homozygotes or heterozygotes. The hemoglobin molecules of Hb^S/Hb^S homozygotes undergo a change in shape that distorts the morphology of the red blood cells, and causes a severe, life-threatening form of anemia called sickle-cell anemia. Persons heterozygous Hb^A/Hb^S for this allele have a much less severe form of anemia called sickle-cell trait. Because the disease phenotype of Hb^A/Hb^S heterozygotes is more similar to but not identical to the Hb^A/Hb^A homozygote, the Hb^A allele is said to be incompletely dominant to the Hb^S allele.
3. Rarely, a single functional allele in the heterozygote may produce insufficient gene product for any function of the gene, and the phenotype resembles that of the homozygote for the non-functional allele. This complete haploinsufficiency is very unusual. In these cases, the non-functional allele would be said to be dominant to the functional allele. This situation may occur when the non-functional allele produces a defective protein that interferes with the proper function of the protein produced by the standard allele. The presence of the defective protein "dominates" the standard protein, and the disease phenotype of the heterozygote more closely resembles that of the homozygote for two defective alleles. The term "dominant" is often incorrectly applied to defective alleles whose homozygous phenotype has not been examined, but which cause a distinct phenotype when heterozygous with the normal allele. This phenomenon occurs in a number of trinucleotide repeat diseases, one example being Huntington's disease.[17]

Many proteins are normally active in the form of a multimer, an aggregate of multiple copies of the same protein, otherwise known as a homomultimeric protein or homooligomeric protein. In fact, a majority of the 83,000 different enzymes from 9800 different organisms in the BRENDA Enzyme Database[18] represent homooligomers.[19] When the wild-type version of the protein is present along with a mutant version, a mixed multimer can be formed. A mutation that leads to a mutant protein that disrupts the activity of the wild-type protein in the multimer is a dominant-negative mutation.

A dominant-negative mutation may arise in a human somatic cell and provide a proliferative advantage to the mutant cell, leading to its clonal expansion. For instance, a dominant-negative mutation in a gene necessary for the normal process of programmed cell death (Apoptosis) in response to DNA damage can make the cell resistant to apoptosis. This will allow proliferation of the clone even when excessive DNA damage is present. Such dominant-negative mutations occur in the tumor suppressor gene p53.[20][21] The P53 wild-type protein is normally present as a four-protein multimer (oligotetramer). Dominant-negative p53 mutations occur in a number of different types of cancer and pre-cancerous lesions (e.g. brain tumors, breast cancer, oral pre-cancerous lesions and oral cancer).[20]

Dominant-negative mutations also occur in other tumor suppressor genes. For instance two dominant-negative germ line mutations were identified in the Ataxia telangiectasia mutated (ATM) gene which increases susceptibility to breast cancer.[22] Dominant negative mutations of the transcription factor C/EBPα can cause acute myeloid leukemia.[23] Inherited dominant negative mutations can also increase the risk of diseases other than cancer. Dominant-negative mutations in Peroxisome proliferator-activated receptor gamma (PPARγ) are associated with severe insulin resistance, diabetes mellitus and hypertension.[24]

Dominant-negative mutations have also been described in organisms other than humans. In fact, the first study reporting a mutant protein inhibiting the normal function of a wild-type protein in a mixed multimer was with the bacteriophage T4 tail fiber protein GP37.[25] Mutations that produce a truncated protein rather than a full-length mutant protein seem to have the strongest dominant-negative effect in the studies of P53, ATM, C/EBPα, and bacteriophage T4 GP37.