EMD MP15DC

The EMD MP15, sometimes referenced as MP15DC is a 1,500 hp (1,100 kW) switcher-type diesel locomotive model produced by General Motors' Electro-Motive Division between 1974-1980. It was equipped with an engine having a roots blower. The length was either 47' 8" or 48' 8" depending on the build date.[1]

EMD MP15DC
Mosaic 212, an EMD MP15DC --Fort Meade, Florida.
Type and origin
Power typeDiesel-electric
BuilderElectro-Motive Division (EMD)
Build date1974–1980[1]
Total produced351
Specifications
Configuration:
  AARB-B
Gauge4 ft 8 12 in (1,435 mm) standard gauge
Trucks9 ft 0 in (2.743 m)
Wheel diameter40 in (1,016 mm)
Length47 ft 8 in (14.53 m) or
48 ft 8 in (14.83 m)
depending on build date[1]
Width10 ft 0 34 in (3.067 m)
Height15 ft 0 in (4.57 m)
Loco weight258,000 lb (117,000 kg)[1]
Fuel capacity1,100–1,400 US gal
(4,200–5,300 l; 920–1,170 imp gal)
Prime moverEMD 12-645E
Engine typeV12 diesel
AspirationRoots-type supercharger
Displacement
  • 645 cu in (10.57 L) / cyl
  • 7,740 cu in (126.8 L)
GeneratorD32
Traction motors4 × D77/78 DC
Cylinders12
Cylinder size9 in × 10 in (229 mm × 254 mm)
Performance figures
Power output1,500 hp (1,100 kW)
Tractive effort62,000 lbf (275.79 kN)

The early MP15 and the SW1500 were similar in appearance and applications. They were fitted with the same engine (a V12 EMD 12-645E) in a similar appearance. The primary difference is the MP15's standard Blomberg B trucks.[1]

Development

Switchers up to the SW1500 had been restricted to AAR type A switcher or Flexicoil lightweight trucks, both with a 96 in (2,438 mm) wheelbase. In 1973 60 special order Mexico-only SW1504s were built on a slightly longer frame, allowing EMD's standard Blomberg B trucks, with a 108 in (2,743 mm) wheelbase, to be used. In EMD's eyes (among others) this made the new locomotive a road switcher rather than a pure switcher, since it was capable of road speeds up to 60 mph (97 km/h) or so. The new model MP15DC designation thus meant Multi-Purpose locomotive, 1500 hp, DC generator. Originally the locomotive was simply designated the MP15; the arrival of the alternator/rectifier MP15AC in 1975 changed the name.

With the success of the MP15, there was a demand for a model with an advanced AC drive system. The MP15AC replaced the MP15DC's DC generator with an alternator producing AC power which is converted to DC for the traction motors with a silicon rectifier. The MP15AC is 1.5 ft (457 mm) longer than an MP15DC, the extra space being needed for the rectifier equipment. The alternator-rectifier combination is more reliable than a generator, and this equipment became the standard for new diesel-electric locomotive designs.

The MP15AC is easily distinguished from the DC models. Instead of the front-mounted radiator intake and belt-driven fan used on all previous EMD switchers, these have intakes on the lower forward nose sides and electric fans. Side intakes allowed the unit to take in cooler air, and the electric fans improved a serious reliability issue found in its earlier DC sisters.[2][3][4]

Engine

The MP15 used a 12-cylinder version of the 645E series engine developing 1500 hp at 900 r.p.m. Introduced in the SW1500, this was a 2-stroke, 45-degree V type, with a 9-inch bore by 10-inch stroke, giving 645 cubic inches displacement per cylinder. The 645 series, introduced in 1966, was EMD's standard engine through the 1980s.[2]:26[3]

See also

Notes

  1. Solomon, Brian (2016-06-15). Field Guide to Trains: Locomotives and Rolling Stock. Voyageur Press. p. 44. ISBN 978-0-7603-4997-7.
  2. Pinkpank, Jerry A (1973). The Second Diesel Spotter’s Guide. Kalmbach Books. pp. 10, 12–13, 48–50. LCCN 66-22894.
  3. Pinkepank, Jerry A.; Marre, Louis A. (1979). Diesel Spotters Guide Update. Kalmbach Books. pp. 4–9. ISBN 0-89024-029-9.
  4. Johnston, Howard; Harris, Ken (2005). Jane’s Train Recognition Guide. HarperCollins Publishing. pp. 414, 425. ISBN 978-0-06-081895-1.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.