EOC 10 inch 40 caliber

The EOC 10 inch 40 caliber guns were a family of related guns designed by the Elswick Ordnance Company and produced by Armstrong Whitworth in the 1890s for export customers. EOC 10 inch 40 caliber guns were the primary armament of armored cruisers, ironclads and pre-dreadnought battleships built or refit during the 1890s. These guns and their licensed derivatives armed ships of the Argentine Navy, Imperial Japanese Navy, Regia Marina and Spanish Navy. They served in the Russo-Japanese War, Italo-Turkish War and World War I.

EOC 10 inch 40 caliber
Twin gun turret of an Ammiraglio di Saint Bon-class battleship
TypeNaval gun
Place of originUnited Kingdom
Service history
In service1895–1945
Used byArgentine Navy
Imperial Japanese Navy
Regia Marina
Spanish Navy
WarsRusso-Japanese War
Italo-Turkish War
World War I
Production history
DesignerElswick Ordnance Company
Designed1893
ManufacturerElswick Ordnance Company
Stabilimenti meccanici di Pozzuoli
Kure Naval Arsenal
Produced1893
VariantsPattern P
Pattern P1
Pattern R
Cannone da 254/40 A 1893
Cannone da 254/40 A 1899
10 inch 40 caliber Type 41
25 cm 40 caliber Type 41
Specifications
Mass30.5 long tons (31.0 t)
Length34.6 ft (10.5 m)
Barrel length33.3 ft (10.1 m) 40 caliber

ShellSeparate-loading 85.7 lb (38.9 kg) bagged ballistite charge
Shell weight480–500 lb (220–230 kg)
Caliber10.0 inches (254 mm)
Elevation-5° to +20°
Traverse-80° to +80°
Rate of fireAbout 1.5 rounds per minute
Muzzle velocity2,460 ft/s (750 m/s)[1]
Maximum firing range11.2 mi (18.0 km) at +20°[2]

History

Development of the 10 inch 40 caliber guns began in the early 1890s at the Elswick Ordnance Company located at Newcastle upon Tyne, England. They were developed for export customers and had the EOC designations of Pattern P, Pattern P1 and Pattern R. They were built-up guns with an A tube and reinforced with two rows of hoops. Originally they had a semi-automatic screw breech mechanism, which opened the breech as the gun recoiled. However, this was found unsatisfactory and was replaced by a hand worked breech.[1]

The Italian designation for the EOC 10 inch guns was Cannone da 254/40 A Modello 1893 and Cannone da 254/40 A Modello 1899. The Modello 1893 version was a trunnion-less gun, while the Modello 1899 had trunnions. Italian single gun mounts were electrically powered, while twin mounts were hydraulically powered. In addition to guns imported from England licensed versions were produced by the Stabilimenti meccanici di Pozzuoli (Armstrong factory) at Pozzuoli, Italy.[3]

In 1908 the Japanese designated EOC 10 inch guns as 10 inch 40 caliber Type 41. Later in 1917, they were re-designated in centimeter as 25 cm 40 caliber Type 41. In addition to guns imported from England and Italy, four licensed versions were produced at the Kure Naval Arsenal beginning in 1908. The Kure guns differed from their English and Italian counterparts by using different rifling.[4]

Argentine Navy

Italian Navy

Japanese Navy

  • Giuseppe Garibaldi-class cruisers - One of the two ships of this class purchased by Japan the Kasuga had a mixed primary armament of one Pattern R gun in a single turret fore and two EOC 8 inch 45 caliber guns in a twin turret aft of the superstructure. The other ship the Nisshin had two EOC 8 inch 45 caliber guns in twin turrets fore and aft of the superstructure. Both ships participated in the Battle of the Yellow Sea and the Battle of Tsushima during the Russo-Japanese War.[9]

Spanish Navy

  • Giuseppe Garibaldi-class cruisers - The single ship of this class purchased by Spain the Cristóbal Colón was designed to carry a single Pattern R gun in a turret fore and two 8-inch guns in a twin turret aft of the superstructure, but the Spanish Ministry of Marine rejected the 10-inch gun, so she had to rely on her two 8-inch guns and ten casemated 6-inch guns.[10] Cristóbal Colón was sunk at the battle of Battle of Santiago de Cuba during the Spanish–American War.[11]

Army Use

As the First World War settled into trench warfare on the Italian Front, the light field guns that the combatants went to war with were beginning to show their limitations when facing an enemy who was now dug into prepared Alpine positions. Indirect fire, interdiction and counter-battery fire emphasized the importance of long-range heavy artillery. In order to address the Italian Army's lack of long-range heavy artillery, surplus 254B, 254/40, 305/17, 305/40, and 305/46 naval guns were converted to land use.[12]

These guns were mounted on the same "De Stefano" carriage for land use and the resulting guns were classified by their size in millimeters 254, their length in calibers 40 and lastly by their carriage type DS which stood for De Stefano or 254/40 DS. The De Stefano carriage was a clever, but strange looking monstrosity which looked something like a child's 4-wheeled toy-horse when the gun barrel was elevated. The carriage was a large 4-wheeled box-trail design with two non-steerable wheels on the front and two castering wheels at the rear. The wheels were fitted with detachable grousers designed by Major Crispino Bonagente for traction on soft ground and was towed in one piece by a Pavesi-Tolotti artillery tractor.[12]

When not on the move the grousers were removed and the steel wheels rode on an inclined set of steel rails when in firing position. The steel rails were mounted on a firing platform made of wooden beams which allowed the gun 360° of traverse. When the gun fired recoil which was not absorbed by the recoil mechanism was transmitted to the wheels and the carriage rolled up the inclined rails and then rolled back into firing position. The box trail carriage was tall and wide enough that the breech of the gun was accessible at high angles of elevation without a pit being dug and the gun crew had a bucket and hoist for ammunition handling.[12]

Ammunition

Ammunition was of separate loading bagged charge and projectile type. The bagged ballistite charge weighed 85.7 lb (38.9 kg) and projectiles weighed between 480–500 lb (220–230 kg).

The gun was able to fire:

Footnotes

  1. Friedman, Norman (2011). Naval weapons of World War One. S. Yorkshire: Seaforth Pub. p. 68. ISBN 9781848321007. OCLC 751804655.
  2. DiGiulian, Tony. "Italy 10"/40 (25.4 cm) EOC Pattern R - NavWeaps". www.navweaps.com. Retrieved 2017-08-12.
  3. Friedman, Norman (2011). Naval weapons of World War One. S. Yorkshire: Seaforth Pub. p. 235. ISBN 9781848321007. OCLC 751804655.
  4. Friedman, Norman (2011). Naval weapons of World War One : guns, torpedoes, mines and ASW weapons of all nations : an illustrated directory. S. Yorkshire: Seaforth Pub. pp. 273–274. ISBN 9781848321007. OCLC 751804655.
  5. "Garibaldi armoured cruisers (1896-1898) - Argentinean Navy (Argentina)". www.navypedia.org. Retrieved 2017-08-11.
  6. "AMMIRAGLIO DI SAINT BON battleships (1901 - 1902) - Regia Marina (Italy)". www.navypedia.org. Retrieved 2017-08-11.
  7. "Giuseppe Garibaldi armoured cruisers (1901 - 1905) - Regia Marina (Italy)". www.navypedia.org. Retrieved 2017-08-11.
  8. "DUILIO turret ships (1880 - 1882) - Regia Marina (Italy)". www.navypedia.org. Retrieved 2017-08-11.
  9. "Kasuga armoured cruisers (1904) - Imperial Japanese Navy (Japan)". www.navypedia.org. Retrieved 2017-08-11.
  10. McSherry, Patrick. "Cristobal Colon". www.spanamwar.com. Retrieved 2017-08-12.
  11. "Spanish cruiser Cristóbal Colón | laststandonzombieisland". laststandonzombieisland.com. Retrieved 2017-08-12.
  12. "Obice 305/17 modello 16 su affusto De Stefano: Italy (ITA)". forum.valka.cz. Retrieved 2018-06-14.

References

  • Campbell, John (1985). Naval Weapons of World War II. Annapolis, MD: Naval Institute Press. ISBN 0-87021-459-4.
  • Friedman, Norman (2011). Naval Weapons of World War One. Barnsley, South Yorkshire, UK: Seaforth. ISBN 978-1-84832-100-7.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.