Ensign of the United States

First official salute to the U.S. flag on board the U.S. warship Andrew Doria in a foreign port, at St. Eustatius in the West Indies, on November 16, 1776

The Grand Union Flag was the de facto first U.S. naval ensign. It was first raised aboard Continental Navy Commodore Esek Hopkins' flagship Alfred on the Delaware River on December 3, 1775; John Paul Jones, then the ship's senior lieutenant, personally claimed this honor.[2]

The current "Stars and Stripes" design was first adopted when the Second Continental Congress passed the Flag Resolution of June 14, 1777: "Resolved, That the flag of the thirteen United States be thirteen stripes, alternate red and white; that the union be thirteen stars, white in a blue field, representing a new constellation."[3] Subsequent flag acts have revised the design as new states joined the union.[4]

The 13-star "boat flag", 1912

Denmark and the Netherlands were the first countries to salute the Grand Union flag, when gun salutes by U.S. ships were returned by officials in the West Indies in late 1776: on Danish St. Croix in October, and on Dutch St. Eustatius in November. (Though later, the better documented St. Eustatius incident involving the USS Andrew Doria is traditionally regarded as the "first salute".) France was the first country to salute the Stars and Stripes, when a fleet off the French mainland returned a gun salute by Captain John Paul Jones commanding USS Ranger on February 14, 1778.[5]

In the 19th century the ensigns were quite large; the biggest ensign in 1870 measured 19 by 36 feet (5.8 by 11.0 m). By the early 20th century, as warships took on distinctive forms and could no longer be easily mistaken for merchantmen at a distance, ensigns began to shrink and today are a fraction of their earlier size — the largest ensign for daily use on ships is now 5 by 9.5 feet (1.5 by 2.9 m).[6]

During the 19th century, for its smaller-sized ensigns, the U.S. Navy used a 13-star flag which became known as "boat flag" due to its predominant use on boats (i.e., launches, gigs and tenders). The Navy appears to have started this practice in the 1850s and is formally documented in the Navy Regulations of 1864. The reason for the lesser number of stars was so that the stars in a smaller size flag would have greater visibility at a distance. Because they flew smaller-sized ensigns, the US Navy's first submarines and destroyers in the early 20th century also used the 13-star ensigns.[6] In 1912, President President Taft formally recognized the Navy's longstanding use of the 13-star ensign in Executive Order 1637, which defined the flag's precise dimensions. The "boat flags'" formal recognition lasted just four more years however, as President Wilson acting through Secretary of the Navy Josephus Daniels discontinued the practice in 1916 with Executive Order 2390, after which all ensigns were supposed to have the full complement of stars.[7] However, some of the flags remained in the supply system until the 1950s.[8]

Coast Guard Ensign

Customs Ensign

The United States Coast Guard flies a unique ensign to show that it has the authority to stop, board, examine, and seize vessels. The U.S. Customs Service flies a very similar flag, but it lacks the badge in the fly. These flags have their origins in a flag that was created in 1799 that was, at that time, intended to be used as an ensign and was in fact so used (i.e., a full standing flag of national character). Today, however, these two flags are called "ensigns" but they are flown in conjunction with, and subordinate to, the US national ensign on Coast Guard and on Customs vessels. Most small craft operated by the US Coast Guard will routinely display both the national ensign and Coast Guard Ensign.

These two present-day flags had their origins in a flag that designed by Secretary of the Treasury Oliver Wolcott for use by the Revenue Cutter Service in August 1799. On August 1, 1799, Secretary of the Treasury, Oliver Wolcott, issued an order announcing that in pursuance of authority from the President, the distinguishing ensign and pennant for the Cutter Service would consist of, "16 perpendicular stripes, alternate red and white, the union of the ensign to be the arms of the United States in a dark blue on a white field." From 1799 onwards, this flag was used as the national ensign in Revenue Cutters and at the same time, was also flown over Customs Houses ashore. In June 1910, however, President William H. Taft ordered that the plain ensign continue to be flown over Customs Houses ashore, and ordered that the Revenue Cutter Service add their department's emblem to the fly of the ensign in order to distinguish between the differing two branches. The order said: "By virtue of the authority vested in me under the provisions of Sec. 2764 of the revised Statutes, I hereby prescribe that the distinguishing flag now used by vessels of the Revenue Cutter Service be marked by the distinctive emblem of that service, in blue and white, placed on a line with the lower edge of the union, and over the center of the seventh vertical red stripe from the mast of said flag, the emblem to cover a horizontal space of three stripes. This change to be made as soon as practicable."

From 1910 onwards, the U.S. Customs Service has continued to use the plain version of the ensign, while the Revenue Cutter Service (which became the Coast Guard) used the defaced version (version with the badge).

The U.S. Coast Guard inherited the "badged" version of the ensign when the Coast Guard came into being in 1915, and in 1927 the cutter badge was updated to use the Coast Guard's own emblem. The Coast Guard badge was slightly modified in 1966. The Coast Guard continues to use the "badged" or "defaced" version of the ensign, although it is now flown by Coast Guard ships and facilities in conjunction with the US national ensign, and not as a stand-alone ensign.

The design of both flags' (Customs and Coast Guard) cantons (i.e., the eagle and stars) was altered in 1951 to make them conform to "the arms of the United States," as was specified in Wolcott's original design statement in 1799.

Information about early U.S. civil ensigns is scant, but there is evidence that at the time of the American Revolution some U.S. merchant ships flew a horizontally striped flag of 13 alternating red and white stripes.[9] These flags with vertical stripes are similar to ones flown by the Sons of Liberty[10] (Such ensigns may also have served as early U.S. naval jacks in conjunction with the Grand Union Flag used as a naval ensign.) In the early years of the United States, ensigns were not yet standardized, leading to number of known variations, such as the Serapis ensign used by John Paul Jones.

The United States Yacht Ensign.

A modification of the national flag and ensign but with a fouled anchor in a circle of thirteen stars in the canton, was created by Act of Congress in August 1848 as a flag to be used by licensed U.S. yachts.[11][12] The design was recommended by the New York Yacht Club in 1849.[13] Yachts eligible for the license were initially 20 net tons and over (later reduced to 15 net tons) and otherwise eligible to be enrolled as a US vessel; the license allowed the yacht to proceed from port to port without the formality of clearing customs. The 1848 act used the word 'signal' to describe the flag that a licensed yacht would use to identify herself, and use of this flag was required by all licensed yachts ("All such licensed yachts shall use a signal of the form, size, and colors prescribed by the Secretary of the Navy."). The Secretary of the Navy approved a modification of "the American Ensign" as the signal, and Treasury Decision No. 2727 (March 24, 1876) issued by the Treasury Department confirmed that the flag was to be used as an ensign ("Licensed yachts are required by law to use the American ensign prescribed by the Secretary of the Navy."), and its use as an ensign was reiterated in Treasury Decision 9426 of June 11, 1889 (referring to the "yacht ensign"). While formally licensed yachts were legally required to fly this modification of the national ensign, unlicensed U.S. yachts also started flying this flag as their ensign, too, and eventually the U.S. Navy confirmed that it recognized this practice for all U.S. yachts. In 1939, the Secretary of the Navy approved the ruling of the Judge Advocate General of the Navy "...that a ship of the Navy should return a dip made by a yacht flying the yacht ensign and that the yacht ensign may properly be made the object of a hand salute to be rendered on boarding or leaving a yacht."

The legal requirement for licensed yachts to fly the Yacht Ensign that was part of United States statute (46 U.S.C. section 109) was repealed by the Vessel Documentation Act of 1980 (Public Law 96–594), which removed several legal provisions pertaining to the by-then very rare category of "licensed yachts" and treated all documented recreational vessels the same. Nevertheless, owing to its long usage by all U.S. yachts, as well as the fact that the freedom-from-clearance privilege first extended to "licensed yachts" in 1848 had long since been extended to all U.S. pleasure craft regardless of whether they are federally documented or state numbered (see 19 U.S.C. sec. 1441), the yacht ensign is widely flown by many U.S. yachts and pleasure boats in U.S. waters today, continuing a tradition that dates back to the mid-nineteenth century.[14][15] The states of Arkansas,[16] Maryland,[17] and Washington[18] have each adopted flag protocols which provide that the U.S. ensign "and the U.S. Yacht Ensign, with a canton of 13 stars, are interchangeable on all types of recreational vessels while in national waters." Similarly, the United States Power Squadrons' guide to flags and flag etiquette,[19] prepared in consultation with the Coast Guard, Coast Guard Auxiliary, New York Yacht Club, and others, provides that the Yacht Ensign may be flown as the ensign by U.S. recreational boats of all types and sizes instead of the national ensign in domestic waters, but that the ordinary national ensign should be worn in international or foreign waters.

The United States Power Squadrons ensign, as a signal, indicates membership of the organization.

The United States Power Squadrons (or USPS) is a non-profit educational organization, founded in 1914, whose mission is to improve maritime safety and enjoyability through classes in seamanship, navigation, and other related subjects. The USPS comprises approximately 45,000 members organized into 450 squadrons across the United States and in some U.S. territories. It is America's largest non-profit boating organization and has been honored by three U.S. presidents for its civil contributions. In 1914, it adopted its own flag, which was then patented in 1916. This flag may be worn as a signal flag on the signal hoist, typically in the starboard rigging. Despite its name and the original intent of its designers, it was never recognized by the U.S. government or navy as a national ensign; however, some smaller boats will wear this flag in place of a national ensign, usually because they lack a mast and do not operate outside home waters.[20] The U.S. Power Squadrons manual of flag etiquette states, "The preferred location for flying the USPS ensign is the starboard yardarm or spreader halyard. It may be worn there day and night."