Mark 24 mine

The concept of a torpedo which would "home" on its target had been studied by torpedo designers as far back as the first World War. While the concept was highly interesting, implementation had to await a better understanding of the physics of sound generation and transmission in the sea and the development of the technology from which such a torpedo could be designed and constructed. During World War II, German submarines were equipped with electrically driven acoustic homing torpedoes which had started development as far back as 1933. The Falke T-4 and Zaunkönig T-5 torpedoes entering service in 1943 were designed to attack surface ships and ran at a preset depth. A similar torpedo (MK28) entered US submarine service in 1944.

While effective against surface ships, the MK28 was of limited use against submarines, due to its inability to track and adjust to changes in both depth and azimuth. The design of Fido enabled it to meet the size, weight, and aerial launch specifications associated with air-drop water entry, in addition to addressing the shortcomings of earlier torpedo tracking and control systems.

Mark 24 mine diagram

The US Navy began studies into an air-dropped anti-submarine torpedo in the autumn of 1941. Based on a formal set of requirements, Harvard Underwater Sound Lab (HUSL) and Bell Telephone Labs began development in December 1941. These projects later became Office of Scientific Research and Development project 61 (FIDO).

Both Bell Labs and HUSL proceeded with parallel development of torpedoes, with a complete exchange of information between them. Western Electric was to develop a lightweight, shock resistant, 48 volt lead-acid battery capable of providing 110 amps for 15 minutes. General Electric was to design and fabricate propulsion and steering motors and to investigate an active acoustic homing system. David Taylor Model Basin was to assist with hydrodynamics and propulsion.

The guidance system consisted of four hydrophones placed around the midsection of the torpedo, connected to a vacuum tube-based sound processing array. A Bell Labs proportional navigation and HUSL non-proportional steering system had been demonstrated by July 1942.

An existing Mark 13 torpedo provided the body of the torpedo, it was modified by shortening the hull, reducing the diameter, reducing the weight, and designing a hemispherical nose section to carry the explosive charge, and a conical tail section with four stabilizing fins and rudders and a single propeller. The effect of these modifications was to produce a relatively short, "fat" torpedo.

In June 1942, the US Navy decided to take the torpedo into production, even though there was still major testing work remaining on the project, including air-drop testing. The Bell Labs version of the guidance system was selected for production, with proportional homing. Testing of the pre-production prototypes continued on into December 1942, and the US Navy received the first production models in March 1943.

Initially 10,000 torpedoes were ordered, but FIDO proved so effective that the order was reduced to 4,000. The torpedoes ended up costing $1,800 each.

Upon water entry, FIDO performed a circular search at a predetermined depth controlled by a bellows and pendulum system. This continued until the potential target's 24 kHz acoustic signal detected by the hydrophones exceeded a predetermined threshold level, at which point control was then shifted to the passive acoustic proportional homing system. Initially the torpedoes were set to search for a target at a depth of 50 feet (15 m), this was later changed to 150 feet (45 m). To prevent the torpedo accidentally attacking surface ships, it resumed its circling search if it rose above a depth of 40 feet (12 m).

The torpedo's relatively low speed was kept secret because, although U-boats could not outrun the torpedo when submerged, they could outrun it on the surface.

On 14 May 1943 a Catalina of the US Navy attacked and destroyed a U-boat; this was either U-657[3] or U-640.[4] On 13 May an RAF Coastal Command Liberator B/86 had attacked a U-boat with a FIDO, but this vessel, U-456,[5] was only damaged, sinking the following day from damage received. One of these vessels was the first U-boat sinking achieved using FIDO. During its career, the torpedo sank a total of 37 submarines, achieving an effectiveness of about 18%, compared with 9.5% for aircraft launched depth charges.[2]^:37

from US Navy OEG Study No. 289, 12 August 1946 provides the following data related to Mark 24 effectiveness:

• Diameter: 19 inches (46 cm).
• Length: 84 inches (2.13 m).
• Weight: 680 lb (308 kg).
• Warhead: 92 lb (41.7 kg) HBX high explosive.
• Propulsion: 5 hp (3.7 kW) electric motor driving a single propeller, powered by a 48 volt lead acid battery.
• Speed and endurance: 12 knots (22 km/h) for 10 minutes, giving a range of about 4,000 yards (3,700 m)
• Homing system: 4 piezoelectric hydrophones operating at 24 kHz and vacuum tube signal processing system with proportional steering.
• Maximum drop altitude: 200 to 300 ft (60 m to 90 m)
• Maximum aircraft launch speed: 120 knots (220 km/h).

• Mark 27 torpedo (Cutie) was developed for submarine use against surface vessels. It saw service in the Pacific war from the summer of 1944. Lieutenant Commander Carter L. Bennett's Sea Owl achieved the Mark 27's first combat success, damaging a Japanese patrol vessel in the Yellow Sea in November.[6]

• http://uboat.net/allies/technical/fido.htm
• https://web.archive.org/web/20060224092332/http://www.navytorpedo.com/html/legacy/USNT4.htm
• Blair, Clay, Jr. Hitler's U-Boat War: The Hunters, 1939-1942. ISBN 0-679-64032-0
• Blair, Clay, Jr. Silent Victory. Bantam, 1976.
• Paul Kemp : U-Boats Destroyed ( 1997) ISBN 1-85409-515-3
• Axel Niestle : German U-Boat Losses during World War II (1998) ISBN 1-85367-352-8