Mosquito control

Adult mosquito populations may be monitored by landing rate counts, mechanical traps or by, lidar technology[1][2] For landing rate counts, an inspector visits a set number of sites every day, counting the number of adult female mosquitoes that land on a part of the body, such as an arm or both legs, within a given time interval. Mechanical traps use a fan to blow adult mosquitoes into a collection bag that is taken back to the laboratory for analysis of catch. The mechanical traps use visual cues (light, black/white contrasts) or chemical attractants that are normally given off by mosquito hosts (e.g., carbon dioxide, ammonia, lactic acid, octenol) to attract adult female mosquitoes. These cues are often used in combination. Entomology lidar detection has the possibility of showing the difference between male and female mosquitoes.[1]

Monitoring larval mosquito populations involves collecting larvae from standing water with a dipper or a turkey baster. The habitat, approximate total number of larvae and pupae, and species are noted for each collection. An alternative method works by providing artificial breeding spots (ovitraps) and collecting and counting the developing larvae at fixed intervals.

Monitoring these mosquito populations is crucial to see what species are present, if mosquito numbers are rising or falling, and detecting any diseases they carry.

Since many mosquitoes breed in standing water, source reduction can be as simple as emptying water from containers around the home. This is something that homeowners can accomplish. Mosquito breeding grounds can be eliminated at home by removing unused plastic pools, old tires, or buckets; by clearing clogged gutters and repairing leaks around faucets; by regularly (at most every 4 days) changing water in bird baths; and by filling or draining puddles, swampy areas, and tree stumps. Eliminating such mosquito breeding areas can be an extremely effective and permanent way to reduce mosquito populations without resorting to insecticides.[3] However, this may not be possible in parts of the developing world where water cannot be readily replaced due to irregular water supply. Many individuals also believe mosquito control is the government's responsibility, so if these methods are not done regularly by homeowners then the effectiveness is reduced.[4]

Open water marsh management (OWMM) involves the use of shallow ditches, to create a network of water flow within marshes and to connect the marsh to a pond or canal. The network of ditches drains the mosquito habitat and lets in fish which will feed on mosquito larvae. This reduces the need for other control methods such as pesticides. Simply giving the predators access to the mosquito larvae can result in long-term mosquito control.[5] Open-water marsh management is used on both the eastern and western coasts of the United States.

Rotational impoundment management (RIM) involves the use of large pumps and culverts with gates to control the water level within an impounded marsh. RIM allows mosquito control to occur while still permitting the marsh to function in a state as close to its natural condition as possible. Water is pumped into the marsh in the late spring and summer to prevent the female mosquito from laying her eggs on the soil. The marsh is allowed to drain in the fall, winter, and early spring. Gates in the culverts are used to permit fish, crustaceans, and other marsh organisms to enter and exit the marsh. RIM allows the mosquito-control goals to be met while at the same time reducing the need for pesticide use within the marsh. Rotational impoundment management is used to a great extent on the east coast of Florida.[6]

Recent studies also explore the idea of using unmanned aerial vehicles as a valid strategy to identify and prioritize water bodies where disease vectors such as Ny. darlingi are most likely to breed.[7]

For the first time, a combination of the nuclear sterile insect technique (SIT) with the incompatible insect technique (IIT) was used in Mosquito Control in Guangzhou, China. The results of the recent pilot trial in Guangzhou, China, carried out with the support of the IAEA in cooperation with the Food and Agriculture Organization of the United Nations (FAO), were published in Nature on 17 July 2019. The results of this pilot trial, using SIT in combination with the IIT, demonstrate the successful near-elimination of field populations of the world's most invasive mosquito species, Aedes albopictus (Asian tiger mosquito). The two-year trial (2016–2017) covered a 32.5-hectare area on two relatively isolated islands in the Pearl River in Guangzhou. It involved the release of about 200 million irradiated mass-reared adult male mosquitoes exposed to Wolbachia bacteria. [8]

Gambusia affinis (Mosquitofish), a natural mosquito predator.

A Hygieostatic Bat Roost, custom-built to house bats for biocontrol of mosquitos

Biological pest control, or "biocontrol", is the use of the natural enemies of pests like mosquitoes to manage the pest's populations. There are several types of biocontrol, including the direct introduction of parasites, pathogens, and predators to target mosquitoes. Effective biocontrol agents include predatory fish that feed on mosquito larvae such as mosquitofish (Gambusia affinis) and some cyprinids (carps and minnows) and killifish. Tilapia also consume mosquito larvae.[9] Direct introduction of tilapia and mosquitofish into ecosystems around the world have had disastrous consequences.[10] However, utilizing a controlled system via aquaponics provides the mosquito control without the adverse effects to the ecosystem.

Other predators include dragonfly (fly) naiads, which consume mosquito larvae in the breeding waters, adult dragonflies, which eat adult mosquitoes, and some species of lizard and gecko.[11] Biocontrol agents that have had lesser degrees of success include the predator mosquito Toxorhynchites and predator crustaceans—Mesocyclops copepods,[12] nematodes and fungi.[13] Predators such as birds, bats, lizards, and frogs have been used, but their effectiveness is only anecdotal.

Like all animals, mosquitoes are subject to disease. Invertebrate pathologists study these diseases in the hope that some of them can be utilized for mosquito management. Microbial pathogens of mosquitoes include viruses, bacteria, fungi, protozoa, nematodes and microsporidia.[14][15]

Dead spores of the soil bacterium Bacillus thuringiensis, especially Bt israelensis (BTI) interfere with larval digestive systems. It can be dispersed by hand or dropped by helicopter in large areas. BTI loses effectiveness after the larvae turn into pupae, because they stop eating.

Two species of fungi can kill adult mosquitoes: Metarhizium anisopliae and Beauveria bassiana.[16]

Integrated pest management (IPM) is the use of the most environmentally appropriate method or combination of methods to control pest populations. Typical mosquito-control programs using IPM first conduct surveys, in order to determine the species composition, relative abundance and seasonal distribution of adult and larval mosquitoes, and only then is a control strategy defined.

An oil drip can or oil drip barrel was a common and nontoxic antimosquito measure.[35][36][37][38][39][40] The thin layer of oil on top of the water prevents mosquito breeding in two ways:[41] mosquito larvae in the water cannot penetrate the oil film with their breathing tube, and so drown and die; also adult mosquitoes do not lay eggs on the oiled water.

Control of larvae can be accomplished through use of contact poisons, growth regulators, surface films, stomach poisons (including bacterial agents), and biological agents such as fungi, nematodes, copepods, and fish.[42] A chemical commonly used in the United States is methoprene, considered slightly toxic to larger animals, which mimics and interferes with natural growth hormones in mosquito larvae, preventing development. Methoprene is frequently distributed in time-release briquette form in breeding areas.

It is believed by some researchers that the larvae of Anopheles gambiae (important vectors of malaria) can survive for several days on moist mud, and that treatments should therefore include mud and soil several meters from puddles.[43]

In 1958, the National Malaria Eradication Program implemented the wide-scale use of DDT for mosquito control.

Control of adult mosquitoes is the most familiar aspect of mosquito control to most of the public. It is accomplished by ground-based applications or via aerial application[44] of residual chemical insecticides such as Duet. Generally modern mosquito-control programs in developed countries use low-volume applications of insecticides, although some programs may still use thermal fogging. Beside fogging there are some other insect repellents for indoors and outdoors. An example of a synthetic insect repellent is DEET. A naturally occurring repellent is citronella. Indoor Residual Spraying (IRS) is another method of adulticide. Walls of properties are sprayed with an insecticide, the mosquitoes die when they land on the surface covered in insecticide.[45]

Anti-mosquito fogging operation P.Ramachandrapuram Village in India

To control adult mosquitoes in India, van mounted fogging machines and hand fogging machines are used.[46][47][48]

Use of DDT

Main article: DDT

DDT was formerly used throughout the world for large area mosquito control, but it is now banned in most developed countries.[49]

Walls on IRS-treated bathroom on the shores of Lake Victoria. The mosquitoes remain on the wall until they fall down dead on the floor.

Controversially, DDT remains in common use in many developing countries (14 countries were reported to be using it in 2009[49]), which claim that the public-health cost of switching to other control methods would exceed the harm caused by using DDT. It is sometimes approved for use only in specific, limited circumstances where it is most effective, such as application to walls.

The role of DDT in combating mosquitoes has been the subject of considerable controversy. Although DDT has been proven to affect biodiversity and cause eggshell thinning in birds such as the bald eagle, some say that DDT is the most effective weapon in combating mosquitoes, and hence malaria. While some of this disagreement is based on differences in the extent to which disease control is valued as opposed to the value of biodiversity,[50] there is also genuine disagreement amongst experts about the costs and benefits of using DDT.

Notwithstanding, DDT-resistant mosquitoes have started to increase in numbers, especially in tropics due to mutations, reducing the effectiveness of this chemical; these mutations can rapidly spread over vast areas if pesticides are applied indiscriminately (Chevillon et al. 1999). In areas where DDT resistance is encountered, malathion, propoxur or lindane is used.

Toxicant	Dosage in g/m2	Average duration of effectiveness in months
DDT	1 to 2	6 to 12
Lindane	0.5	3
Malathion	2	3
Propoxur	2	3

A light trap that attracts and captures mosquitoes.

A traditional approach to controlling mosquito populations is the use of ovitraps or lethal ovitraps, which provide artificial breeding spots for mosquitoes to lay their eggs. While ovitraps only trap eggs, lethal ovitraps usually contain a chemical inside the trap that is used to kill the adult mosquito and/or the larvae in the trap. Studies have shown that with enough of these lethal ovitraps, Aedes mosquito populations can be controlled.[51] A recent approach is the automatic lethal ovitrap, which works like a traditional ovitrap but automates all steps needed to provide the breeding spots and to destroy the developing larvae.[52]

In 2016 researchers from Laurentian University released a design for a low cost trap called an Ovillanta which consists of attractant-laced water in a section of discarded rubber tire. At regular intervals the water is run through a filter to remove any deposited eggs and larva. The water, which then contains an 'oviposition' pheromone deposited during egg-laying, is reused to attract more mosquitoes. Two studies have shown that this type of trap can attract about seven times as many mosquito eggs as a conventional ovitrap.[53][54][55][56]

Some newer mosquito traps or known mosquito attractants emit a plume of carbon dioxide together with other mosquito attractants such as sugary scents, lactic acid, octenol, warmth, water vapor and sounds.[57] By mimicking a mammal's scent and outputs, the trap draws female mosquitoes toward it, where they are typically sucked into a net or holder by an electric fan where they are collected. According to the American Mosquito Control Association, the trap will kill some mosquitoes, but their effectiveness in any particular case will depend on a number of factors such as the size and species of the mosquito population and the type and location of the breeding habitat. They are useful in specimen collection studies to determine the types of mosquitoes prevalent in an area but are typically far too inefficient to be useful in reducing mosquito populations.

Research is being conducted that indicates that dismantling a protein associated with eggshell organization, factor EOF1 (factor 1), which may be unique to mosquitoes, may be a means to hamper their reproduction effectively in the wild without creating a resistant population or affecting other animals.[58][59]

Some biologists have proposed the deliberate extinction of certain mosquito species. Biologist Olivia Judson has advocated "specicide" of thirty mosquito species by introducing a genetic element which can insert itself into another crucial gene, to create recessive "knockout genes".[60] She says that the Anopheles mosquitoes (which spread malaria) and Aedes mosquitoes (which spread dengue fever, yellow fever, elephantiasis, zika, and other diseases) represent only 30 out of some 3,500 mosquito species; eradicating these would save at least one million human lives per year, at a cost of reducing the genetic diversity of the family Culicidae by 1%. She further argues that since species become extinct "all the time" the disappearance of a few more will not destroy the ecosystem: "We're not left with a wasteland every time a species vanishes. Removing one species sometimes causes shifts in the populations of other species — but different need not mean worse." In addition, anti-malarial and mosquito control programs offer little realistic hope to the 300 million people in developing nations who will be infected with acute illnesses this year. Although trials are ongoing, she writes that if they fail: "We should consider the ultimate swatting."[60]

Biologist E. O. Wilson has advocated the extinction of several species of mosquito, including malaria vector Anopheles gambiae. Wilson stated, "I'm talking about a very small number of species that have co-evolved with us and are preying on humans, so it would certainly be acceptable to remove them. I believe it's just common sense."[61]

Insect ecologist Steven Juliano has argued that "it's difficult to see what the downside would be to removal, except for collateral damage". Entomologist Joe Conlon stated that "If we eradicated them tomorrow, the ecosystems where they are active will hiccup and then get on with life. Something better or worse would take over."[62]

However, David Quammen has pointed out that mosquitoes protect forests from human exploitation and may act as competitors for other insects.[63] In terms of malaria control, if populations of mosquitoes were temporarily reduced to zero in a region, then this would exterminate malaria, and the mosquito population could then be allowed to rebound.[64]

• Chevillon, Christine; Raymond, Michel; Guillemaud, Thomas; Lenormand, Thomas; Pasteur, Nicole (1999). "Population genetics of insecticide resistance in the mosquito Culex pipiens" (PDF). Biol. J. Linn. Soc. 68 (1–2): 147–57. doi:10.1111/j.1095-8312.1999.tb01163.x. Archived from the original (PDF fulltext) on 24 November 2006.
• Florida Coordinating Council on Mosquito Control (1998). Florida Mosquito Control: The State of the Mission as Defined by Mosquito Controllers, Regulators, and Environmental Managers (White Paper). University of Florida. Archived from the original on 20 June 2004.
• Durden, Lance A.; Mullen, Gary L. (2002). Medical and veterinary entomology. Boston: Academic Press. ISBN 978-0-12-510451-7.
• Service, M.W. (1993). Mosquito ecology: field sampling methods (2nd ed.). London: Elsevier Applied Science. ISBN 978-1-85166-798-7.
• Ware, George Whitaker (1994). The pesticide book (4th ed.). Fresno, CA: Thomson Publications. ISBN 978-0-913702-58-1.
• Walker, K. (April 2002). A review of control methods for African malaria vectors (PDF) (Activity Report). 108. U.S. Agency for International Development.

• CDC info page on malaria vector control
• The American Mosquito Control Association
• The European Mosquito Control Association
• WHO Vector control site
• Reducing mosquito population the environmental way