National Radio Institute

James Ernest Smith, founder of the National Radio Institute

The National Radio School was established in 1914 in Washington, D.C. by James Ernest Smith (1881–1973) and Emanuel R. Haas (1891–1947).¹ Smith was a teacher at McKinley Manual Training School (moved in 1926 to its present location and now known as McKinley Technology High School). He held a bachelor's degree in electrical engineering from Worcester Polytechnic Institute (B.S.E.E., 1906) and began his career at Westinghouse Electric Corporation in Pittsburgh, but he took an extended leave of absence to teach what remained in the term of an applied electricity course for a colleague at McKinley whom had become ill. It went well and Smith was offered a permanent position at the school, which he accepted. After a while, students began coming to him for private formal instruction and this is how the National Radio School began. With encouragement and assistance from Haas, who was then Assistant Publicity Director for Keith's Theater in Washington D.C., a small classroom was set up for four students inside the U. S. Savings Bank Building at 14th and U Street N.W., now the site of the Frank D. Reeves Municipal Center. Haas became the school's Vice President and Business Director. Additional students quickly began to seek enrollment.

In 1915, John Albert Dowie (1886–1958) was hired as the National Radio School's Radio Theory Instructor (later becoming Chief Instructor) and he stayed with the school for 36 years. The first home-study courses were developed and implemented by the National Radio School as early as 1916 in order to accommodate the needs of those students who wished to continue their training but were no longer able to be physically present. During World War I, facilities were expanded as there was a strong demand for radio operators. By 1917, enrollment had grown to 150 students.

NRI's main office building at 16th and U Street NW in Washington D.C., home of the school from 1927 to 1957.

In 1918, the U. S. government appointed Smith as the director of the Radio Department at Howard University, where he was responsible for Signal Corps training, while Haas was asked to conduct radio work for the Army Officer's School at Yale University and Camp Alfred Vail, Little Silver, New Jersey. Edward L. Degener (1898–1974) joined to oversee advertising and organization in Haas' temporary absence, but stayed on afterwards and eventually became General Manager and Treasurer, retiring in 1960. After the war, the demand for radio operators continued to grow and, in 1920, classes were moved to Pennsylvania Avenue when the school was renamed the National Radio Institute. In 1923, the business was relocated to Connecticut Avenue NW in Washington D.C., and classroom instruction was discontinued entirely so the school could focus solely on its home-study model. The business quickly outgrew this location, as well, and moved to 16th And U Street NW in 1927, where it solely and entirely occupied the building in which it remained for the next 30 years. The building on U Street was constructed in 1915 and still stands today, currently being occupied by the Center for Community Change.

In addition to more than 250 textbooks, NRI began, in 1928, to publish for the benefits of its students and alumni a trade magazine originally called National Radio News, which was renamed multiple times to: National Radio - TV News(1950), NRI News(1958), and finally to NRI Journal(1963).[3] An alumni association was formed on November 23, 1929. By this point, NRI's average annual enrollment was around 18,000 students. Established that same year was NRI's technical advisory board, which eventually included among its members: Lee de Forest, the American inventor of the Audion triode vacuum tube; the well-known radio engineer Cyril M. Jansky Jr.; and Maj. Gen. George Owen Squier. American electrical engineer Alfred Norton Goldsmith joined the board in 1934, followed in 1935 by inventor and television pioneer Philo Farnsworth (a 1924 alumnus of NRI), and Harry Diamond (engineer) in 1938. By 1932, Joseph Kaufman, both an MIT graduate and electrical engineering instructor, was hired as Supervisor of Education (later, Director of Education). In 1942, NRI contracted him for a dollar per year to the National Bureau of Standards, where he worked with Harry Diamond to develop the radio proximity fuze.

A sketch of the NRI building on Wisconsin Ave NW in Washington D.C., which appeared in the Jun-Jul 1957 issue of the National Radio-TV News Journal announcing the school's relocation.

In 1947, Haas died unexpectedly and his responsibilities were passed on to James E. Smith's son, James Morrison Smith (1916–2010)², also a graduate of Worcester Polytechnic Institute (B.S.I.E., 1937) and a former engineer at U. S. Steel and DuPont. J. M. Smith had been an executive at the school since 1945. In December 1956, James E. Smith turned 75 years of age and stepped down from the presidency, handing the role over to his son, while remaining active in the school as founder and chairman of the board. The following year, plans began for a 59,000 square feet building NRI had designed specifically for its needs at 3939 Wisconsin Avenue NW in Washington D.C. After construction of the new building was completed, the school moved in May 1957 and remained at that location until it closed down over four decades later. In 1960, E. L. Degener retired from NRI after 41 years of service.

The National Radio School and Institute ran advertisements on its courses for decades in magazines such as Boys' Life, Popular Science, Popular Mechanics, Radio-Electronics, and Electronics Illustrated.[4] These ads often contained appealing testimonials from NRI graduates, but sometimes by popular and/or successful spokespersons who were not NRI alumni. For example, Tom McCahill endorsed NRI 's appliance repair course in a 1975 ad in Popular Mechanics.[5] According to one source, direct marketing ads largely stopped by the mid-1970s.³

The technological advances that were occurring during this time period, combined with low production costs (e.g. from offshoring activities), resulted in fierce global competition in the semiconductor and electronics manufacturing industries in the last two decades of the twentieth century, helping to drive a continuous price erosion of their products. Market share and revenues of American television and radio manufacturers, for example, decreased precipitously with the success of foreign manufacturers. By the 1980s, imported radio and television receivers (particularly from Japan) dominated the American market. These products were extensively tested by the manufacturers so that, in the eyes of the consumers, the units exhibited higher reliability and better quality at lower prices. Many major American TV and radio manufacturers were forced to exit the business. One-by-one, these companies closed down, sold their assets, or ceased their domestic radio/TV production: Quasar (brand)/Motorola (1974); Magnavox (1974); Admiral (electrical appliances) (1979); GTE (1981), including Sylvania Electric Products and Philco; Curtis Mathes Corporation (1982); General Electric (1985); and RCA (1986). The last U. S. manufacturer to produce television receivers domestically was Zenith Electronics, which sold a controlling interest of its shares to the Korean company LG Electronics in 1995. It became a wholly owned subsidiary of LG in 1999.

Technological advances had a large role to play in the vanishing of TV/radio service jobs during this time period. At least three contributory factors can be singled out:

1) Weak cost justification for repairs: It was becoming hard for consumers to justify the repairing of malfunctioning electronic items when the purchasing of newer models was so affordable, as a result of the advances in semiconductor and electronic materials technology. With the exception of display technologies, the newer television and radio receivers generally had internal components that were fewer in number and smaller in size and, thus, less costly to produce. Weak cost justification for repairs remains a factor today with most consumer electronics items.[12]

2) Relative ease of repairs: By the early 1980s most TV and radio manufacturers were producing solid-state sets with a modular chassis design, which meant technicians needed less formal training to make repairs as component-level troubleshooting was no longer frequently practiced or required. This was similar to the situation with older tube sets, where repairs often only took swapping out a vacuum tube. By the end of the decade, some solid-state TV manufacturers were producing sets in which the electronic circuit, in totality, for the entire receiver was contained on a single printed circuit board that was replaceable. Today, the opposite is true. Flat screen television receivers are more difficult to repair than old CRT sets were, and replacement parts are hard to obtain from the manufacturer, with long lead times.

3) Equipment obsolescence: By the end of the 1990s, the demise of discrete analogue electronics ensured the technological obsolescence of many of the traditional mainstays of the consumer audio/video service industry, such as cathode ray tube (CRT) television sets, videocassette recorders, LaserDisc players, as well as tape recorders/players, console stereos and component stereo systems. These items were being replaced in favor of much less costly and/or more portable, higher-technology devices with advanced features utilizing digital signal processing and computer technology prized by consumers. Unfortunately, the new products were either difficult-to-service, not economically feasible to repair, or designed with planned obsolescence. Today, the even more rapid pace of technological advancement often seems to make electronic equipment obsolete in a relatively short period of time after purchase.

This progression of America towards a throw-away society drastically altered employment prospects in the electronics service sector. For example, according to the Professional Service Association, the number of TV repair shops fell from 20,000 in 1992 to 9,000 in 2002 and to around 7,000 by 2007. From 2011 to 2016, the average annual growth rate of the electronics and computer repair services industry was -1.0%.[13] The concomitant effect, for NRI Schools, was a sharp decline in enrollment. However, many of NRI's competitors in the home-study business (see below) survived these turbulent times by greatly diversifying their academic offerings to include non-technical training coursers more relevant to contemporary society.

Ultimately, after radio-television-electronics servicing seemingly lost its appeal as a trade, McGraw-Hill announced that NRI Schools would be phased out, simply citing "changes in the marketplace".[14] NRI Schools ceased accepting new enrollment applications on April 1, 1999 and discontinued operations completely on March 31, 2002, giving the institution a respectable 88 years of existence in the business of distance education.

Over its lifetime, NRI administered 1.5 million correspondence courses and had succeeded in adapting to training its students through the ushering in of major technical transformations in the radio-television-electronics industry of that time period: from vacuum tubes to solid-state devices (first to discrete transistors and then to integrated circuits); from CRTs to flat panel display; the rise in popularity of cable television and the decline of terrestrial television; the switch from electro-mechanical tuners to entirely microprocessor-controlled receivers, as well as the introduction of personal computers. NRI Schools closed seven years prior to the Digital television transition in the United States. After the school shut down, the Wisconsin Avenue property was purchased and occupied by Fannie Mae, whose headquarters are directly across the street.