Point groups in two dimensions

There are two families of discrete two-dimensional point groups, and they are specified with parameter n, which is the order of the group of the rotations in the group.

Group	Intl	Orbifold	Coxeter		Order	Description
Cn	n	n•	[n]+		n	Cyclic: n-fold rotations. Abstract group Zn, the group of integers under addition modulo n.
Dn	nm	*n•	[n]		2n	Dihedral: n-fold rotations and n-fold reflections. Abstract group Dihn, the dihedral group.

Intl refers to Hermann–Mauguin notation or international notation, often used in crystallography. In the infinite limit, these groups become the one-dimensional line groups.

If a group is a symmetry of a two-dimensional lattice or grid, then the crystallographic restriction theorem restricts the value of n to 1, 2, 3, 4, and 6 for both families. There are thus 10 two-dimensional crystallographic point groups:

• C₁, C₂, C₃, C₄, C₆,
• D₁, D₂, D₃, D₄, D₆

The groups may be constructed as follows:

• C_n. Generated by an element also called C_n, which corresponds to a rotation by angle 2π/n. Its elements are E (the identity), C_n, C_n², ..., C_nⁿ⁻¹, corresponding to rotation angles 0, 2π/n, 4π/n, ..., 2(n − 1)π/n.
• D_n. Generated by element C_n and reflection σ. Its elements are the elements of group C_n, with elements σ, C_nσ, C_n²σ, ..., C_nⁿ⁻¹σ added. These additional ones correspond to reflections across lines with orientation angles 0, π/n, 2π/n, ..., (n − 1)π/n. D_n is thus a semidirect product of C_n and the group (E,σ).

All of these groups have distinct abstract groups, except for C₂ and D₁, which share abstract group Z₂. All of the cyclic groups are abelian or commutative, but only two of the dihedral groups are: D₁ ~ Z₂ and D₂ ~ Z₂×Z₂. In fact, D₃ is the smallest nonabelian group.

For even n, the Hermann–Mauguin symbol nm is an abbreviation for the full symbol nmm, as explained below. The n in the H-M symbol denotes n-fold rotations, while the m denotes reflection or mirror planes.

These groups are readily constructed with two-dimensional orthogonal matrices.

The continuous cyclic group SO(2) or C_∞ and its subgroups have elements that are rotation matrices:

${\displaystyle R(\theta )={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \\\end{bmatrix}}}$

where SO(2) has any possible θ. Not surprisingly, SO(2) and its subgroups are all abelian; addition of rotation angles commutes.

For discrete cyclic groups C_n, elements C_n^k = R(2πk/n)

The continuous dihedral group O(2) or D_∞ and its subgroups with reflections have elements that include not only rotation matrices, but also reflection matrices:

${\displaystyle S(\theta )={\begin{bmatrix}\cos \theta &\sin \theta \\\sin \theta &-\cos \theta \\\end{bmatrix}}}$

where O(2) has any possible θ. However, the only abelian subgroups of O(2) with reflections are D₁ and D₂.

For discrete dihedral groups D_n, elements C_n^kσ = S(2πk/n)

When one uses polar coordinates, the relationship of these groups to one-dimensional symmetry groups becomes evident.

Types of subgroups of SO(2):

• finite cyclic subgroups C_n (n ≥ 1); for every n there is one isometry group, of abstract group type Z_n
• finitely generated groups, each isomorphic to one of the form Z^m ${\displaystyle \oplus }$Z _n generated by C_n and m independent rotations with an irrational number of turns, and m, n ≥ 1; for each pair (m, n) there are uncountably many isometry groups, all the same as abstract group; for the pair (1, 1) the group is cyclic.
• other countable subgroups. For example, for an integer n, the group generated by all rotations of a number of turns equal to a negative integer power of n
• uncountable subgroups, including SO(2) itself

For every subgroup of SO(2) there is a corresponding uncountable class of subgroups of O(2) that are mutually isomorphic as abstract group: each of the subgroups in one class is generated by the first-mentioned subgroup and a single reflection in a line through the origin. These are the (generalized) dihedral groups, including the finite ones D_n (n ≥ 1) of abstract group type Dih_n. For n = 1 the common notation is C_s, of abstract group type Z₂.

As topological subgroups of O(2), only the finite isometry groups and SO(2) and O(2) are closed.

These groups fall into two distinct families, according to whether they consist of rotations only, or include reflections. The cyclic groups, C_n (abstract group type Z_n), consist of rotations by 360°/n, and all integer multiples. For example, a four-legged stool has symmetry group C₄, consisting of rotations by 0°, 90°, 180°, and 270°. The symmetry group of a square belongs to the family of dihedral groups, D_n (abstract group type Dih_n), including as many reflections as rotations. The infinite rotational symmetry of the circle implies reflection symmetry as well, but formally the circle group S₁ is distinct from Dih(S₁) because the latter explicitly includes the reflections.

An infinite group need not be continuous; for example, we have a group of all integer multiples of rotation by 360°/√2, which does not include rotation by 180°. Depending on its application, homogeneity up to an arbitrarily fine level of detail in a transverse direction may be considered equivalent to full homogeneity in that direction, in which case these symmetry groups can be ignored.

C_n and D_n for n = 1, 2, 3, 4, and 6 can be combined with translational symmetry, sometimes in more than one way. Thus these 10 groups give rise to 17 wallpaper groups.

The 2D symmetry groups correspond to the isometry groups, except that symmetry according to O(2) and SO(2) can only be distinguished in the generalized symmetry concept applicable for vector fields.

Also, depending on application, homogeneity up to arbitrarily fine detail in transverse direction may be considered equivalent to full homogeneity in that direction. This greatly simplifies the categorization: we can restrict ourselves to the closed topological subgroups of O(2): the finite ones and O(2) (circular symmetry), and for vector fields SO(2).

These groups also correspond to the one-dimensional symmetry groups, when wrapped around in a circle.

E(2) is a semidirect product of O(2) and the translation group T. In other words, O(2) is a subgroup of E(2) isomorphic to the quotient group of E(2) by T:

O(2) ${\displaystyle \cong }$ E(2) / T

There is a "natural" surjective group homomorphism p : E(2) → E(2)/ T, sending each element g of E(2) to the coset of T to which g belongs, that is: p (g) = gT, sometimes called the canonical projection of E(2) onto E(2) / T or O(2). Its kernel is T.

For every subgroup of E(2) we can consider its image under p: a point group consisting of the cosets to which the elements of the subgroup belong, in other words, the point group obtained by ignoring translational parts of isometries. For every discrete subgroup of E(2), due to the crystallographic restriction theorem, this point group is either C_n or of type D_n for n = 1, 2, 3, 4, or 6.

C_n and D_n for n = 1, 2, 3, 4, and 6 can be combined with translational symmetry, sometimes in more than one way. Thus these 10 groups give rise to 17 wallpaper groups, and the four groups with n = 1 and 2, give also rise to 7 frieze groups.

For each of the wallpaper groups p1, p2, p3, p4, p6, the image under p of all isometry groups (i.e. the "projections" onto E(2) / T or O(2) ) are all equal to the corresponding C_n; also two frieze groups correspond to C₁ and C₂.

The isometry groups of p6m are each mapped to one of the point groups of type D₆. For the other 11 wallpaper groups, each isometry group is mapped to one of the point groups of the types D₁, D₂, D₃, or D₄. Also five frieze groups correspond to D₁ and D₂.

For a given hexagonal translation lattice there are two different groups D₃, giving rise to P31m and p3m1. For each of the types D₁, D₂, and D₄ the distinction between the 3, 4, and 2 wallpaper groups, respectively, is determined by the translation vector associated with each reflection in the group: since isometries are in the same coset regardless of translational components, a reflection and a glide reflection with the same mirror are in the same coset. Thus, isometry groups of e.g. type p4m and p4g are both mapped to point groups of type D₄.

For a given isometry group, the conjugates of a translation in the group by the elements of the group generate a translation group (a lattice)—that is a subgroup of the isometry group that only depends on the translation we started with, and the point group associated with the isometry group. This is because the conjugate of the translation by a glide reflection is the same as by the corresponding reflection: the translation vector is reflected.

If the isometry group contains an n-fold rotation then the lattice has n-fold symmetry for even n and 2n-fold for odd n. If, in the case of a discrete isometry group containing a translation, we apply this for a translation of minimum length, then, considering the vector difference of translations in two adjacent directions, it follows that n ≤ 6, and for odd n that 2n ≤ 6, hence n = 1, 2, 3, 4, or 6 (the crystallographic restriction theorem).

• Point group
• Point groups in three dimensions
• Point groups in four dimensions
• One-dimensional symmetry group

• , Geometric Transformations and Wallpaper Groups: Symmetries of Geometric Patterns (Discrete Groups of Isometries), by Lance Drager.
• Point Groups and Crystal Systems, by Yi-Shu Wei, pp. 4–5
• The Geometry Center: 2.1 Formulas for Symmetries in Cartesian Coordinates (two dimensions)