Prince Edward Island Railway

Located wholly within the province of Prince Edward Island, construction of the PEIR started in 1871, eventually financed by Canada. The line was initially built to 3 ft 6 in (1,067 mm) gauge, under the supervision of Chief Engineer John Edward Boyd a native of Saint John, New Brunswick who first advocated the use of narrow gauge for the New Brunswick Railway in the 1860s, and was responsible for the first surveys of the Toronto, Grey and Bruce Railway and the Toronto and Nipissing Railway in Ontario. The PEIR was frequently criticized for its meandering path, reputedly caused by construction contractors who were paid by the mile; this may also be accounted for in economies taken by reducing the amount of grading and trenching required by going around hills and obstacles. At one point there was on average one railway station for every 2.5 miles (4 km) of track. The main line connected the northwestern port of Alberton (later extended to Tignish) with the Northumberland Strait ports of Summerside, Charlottetown, Georgetown, and Souris. By 1872, construction debts threatened to bankrupt the colony.

The United Kingdom had consistently encouraged the small colony to enter into Canadian Confederation, something which it had been avoiding since playing host to the Charlottetown Conference a decade earlier. The railway construction debts pushed the colony into reconsidering Confederation, and following further negotiations, Prince Edward Island became a province of Canada on July 1, 1873.

The understated provision in the Prince Edward Island Terms of Union reads as follows:

That the railways under contract and in course of construction for the Government of the Island, shall be the property of Canada;

Thus the Government of Canada came to inherit the PEIR in 1874 at the same time as construction was progressing on the Intercolonial Railway (IRC), which would link the strategic winter ports of the Canadian Maritimes with Central Canada. New locomotives were purchased from the United Kingdom and from Canadian manufacturers along with new rail cars.

In 1885, a new line was built connecting the Charlottetown-Summerside main line at Emerald Junction with another Northumberland Strait port at Cape Traverse. From Cape Traverse, iceboats would cross the Abegweit Passage to Cape Tormentine, New Brunswick during the winter months.

Another new line was built east from Charlottetown to Murray Harbour, part of which included building the Hillsborough River Bridge, using a former IRC bridge over the Miramichi River at Newcastle, New Brunswick. Branches were also constructed at this time off PEIR lines to Vernon Bridge, Montague, and Elmira.

From 1915–1918, PEIR and IRC would come to be known collectively as the Canadian Government Railways (CGR), although each company would maintain its separate corporate identity and management.

The most revolutionary change to the PEIR occurred in 1915 when a new icebreaking railcar ferry called Prince Edward Island was ordered by the federal government, arriving from the United Kingdom with a capacity of 12 rail cars, however it would not be until 1917 that the port facilities at Port Borden and Cape Tormentine would be ready to handle the vessel. In the meantime, the Prince Edward Island continued to operate the service to the port of Pictou, Nova Scotia from Georgetown and Charlottetown for the next two years.

The new ferry port at Borden required the Cape Traverse-Emerald Junction line be modified, and a line was constructed to Borden, along with marshalling yards and other facilities. The Cape Traverse line would only last a few more years before being abandoned following the move to Borden. Up until this point, the PEIR was a completely captive system, having no need for interchange with mainland North American railways. Following the start of railcar service in 1917, the lines to Charlottetown and Summerside from Borden were dual-gauged, capable of handling mainland cars with the standard gauge of 1,435 mm (4 ft 8 ¹⁄₂ in) and the PEIR's narrow gauge of 3 ft 6 in (1,067 mm).

This steam engine left the rails near New Annan in 1903. No one was hurt, but another accident at the same location three years earlier scalded the engineer to death. Such accidents were common on the PEIR's narrow-gauge line, prior to gauge standardization, which was subject to shifts and frost heaves.

After re-gauging, PEIR could support full-sized locomotives and trains. This example is pulling through the Maple Hill region in the spring of 1949.

In September 1918, management of CGR (including PEIR) was transferred to the newly nationalized Canadian Northern Railway (CNoR). These companies were assumed by a new Crown corporation established by the federal government in December 1918, called Canadian National Railways (CNR). By 1923 all corporate entities ceased to exist under CNR.

Diesel engine used in PEI in the 1950s. PEI had diesel service a full decade before the rest of Canada.

Soon after CNR took over, it was decided to standard gauge all narrow gauge trackage on Prince Edward Island. This was completed from Tignish to Charlottetown by 1924, and remaining lines in the east end of the province were completed by 1926 except for the Murray Harbour line which was standard gauged by September 1930.

The last significant railway construction on Prince Edward Island occurred during the early 1930s when the Hillsborough River Bridge carrying the Murray Harbour line over the Hillsborough River was unable to handle the heavier standard gauge cars, thus a 10-mile (16.1 km) connecting track called the Short Line was built from a point at Maple Hill Junction on the Mount Stewart Jct.-Georgetown line, to connect with the Murray Harbour track at Lake Verde Junction. In 1951, the Hillsborough River bridge was deemed too weak to carry even the lightest engines and cars, thus the trackage was removed and trains trying to reach Southport on the opposite side of Charlottetown Harbour would have to run over 30 miles (48.3 km) via Mount Stewart Junction and the Short Line.

CNR was busy on Prince Edward Island during the Second World War when a 2-mile (3.2 km) spur line was built from St. Eleanors, west of Summerside, to service a new air force base (CFB Summerside), and the railway was pressed into service to supply a radar base in Tignish, as well as a flight training school in Mount Pleasant, midway between Summerside and Tignish.

Increased use of diesel locomotives in North America during and after the Second World War saw CNR completely dieselize its operations on Prince Edward Island by the late 1940s as a means to save money on hauling bulk coal to the province. This meant that Prince Edward Island rail lines had diesel locomotives fully one decade before the rest of Canada saw the last of steam, giving the province a prominent place in Canadian railway history as one of the first regional dieselization projects.

The rising popularity of automobiles travelling on government-funded all-weather highways saw passenger rail traffic decline sharply during the 1950s and into the 1960s. The last passenger train on Prince Edward Island operated in 1968, being replaced by buses thereafter.

CN (name change to Canadian National Railway or acronym CN in 1960) was a major presence in Prince Edward Island's economy, from operating the freight and passenger railway (and later bus) services, to a large fleet of company owned and operated ferries. The ferry system was noteworthy by the fact that it was mandated by Prince Edward Island's "Terms of Union" under the British North America Act of Canadian Confederation, to provide "efficient steamship service." This required the use of icebreakers, some of which were the largest of their kind in the world at one time.

Trucks soon began to take traffic away from freight operations on Prince Edward Island, particularly as CNR improved the ferry system to accept more road vehicles. By the 1970s, critical agricultural cargo such as the potato harvests were increasingly transferring to trucks with each successive season. As a result, CN increasingly began to avoid investing capital into improving railway infrastructure in the province. In a classic "demarketing" strategy, CN's deteriorating track conditions resulted in further loss of service to trucks.

By the early 1980s CN made it clear the days of its railway operations on Prince Edward Island were numbered, but Island politicians at the provincial and federal level managed to dissuade CN from abandoning. The renewed talk of a fixed link in 1985–1986, following aborted attempts at building a highway/railway causeway across Abegweit Passage in 1957 and 1965–1969, saw CN accelerate its attempts to withdraw railway service on Prince Edward Island.

In 1975 the railway station in Elmira was re-opened to become the Island's first railway museum.[1] The museum is housed in the actual Elmira railway station. The museum originally included two former Canadian National Railway passenger cars: one former wood sided baggage car and a steel railway post office (RPO) car. In the 1990s arson claimed the baggage car. Approximately a decade later, RPO was scrapped having succumbed to age and a lack of preservation activities. The trucks from the baggage car are still on the property. Several railway cars were on display at the provincially operated railway museum at Elmira until the mid-2000s but have since been scrapped due to neglect on the part of the PEI Museum & Heritage Foundation. A ex-CN caboose 78431 was acquired and moved to museum in 2009.[2]

In 1990, a diesel locomotive (class MLW RSC-14 number 1767) donated to Summerside several years earlier, needed to be moved to nearby Kensington. Although now abandoned, the railway's tracks were still intact between both locations, except for several grade crossings at local roads where rails had been removed. The locomotive was towed by construction machinery across temporary tracks built over these roads to its new location, where it remains on display as part of a community-operated railway museum. The former Kensington Railway Station was designated a National Historic Site of Canada.[3]

Another railway car is currently undergoing preservation at Borden-Carleton. This car is a plywood sided, former CNR, caboose and is located adjacent to a replica railway station. Both can be seen from the Confederation Bridge.

Two former railway tank cars reside beside the railway on the property of Island Construction on the Sherwood Road in Charlottetown. Both tank cars are adjacent to the railway trail can be easily seen and photographed from the trail. These tank cars are 36' long each. During the final years of railway operation on PEI these tank cars could be seen parked in the Borden railway yard and were used to store fuel oil for the ferry boats. Both tank cars are painted a light blue colour (the same paint scheme they featured during their railway service).

Steven Boyko notes on his blog[6]

Side note: RDC D302 was tested on PEI in March 1958 but "it proved unsuitable because of difficulties it encountered crossing the ferry ramp, and negotiating the sharp turns between Borden and Charlottetown".

The following vessels were owned and operated by CNR/CN (1918–1977), CN Marine (CN subsidiary, 1977–1986) or by successor Marine Atlantic (post-1986) on the Northumberland Strait ferry service:

• Prince Edward Island (1915–1968)*
• Scotia I (various times 1901-1955)*
• Charlottetown (1931–1941)*
• Abegweit (1947–1982)*
• Scotia II (various times 1915-1968)*
• Confederation (1962–1975)
• John Hamilton Gray (1968–1997)*
• Lucy Maude Montgomery (1969–1973)
• Holiday Island (1971–1997)
• Vacationland (1971–1997)
• Abegweit (1982–1997)*

* denotes combination train ferry/ferry