Proton Satria

1998–2005 Proton Satria GTi (C99)

The Proton Satria GTi was launched in 1998 with a 138 bhp (103 kW) 1.8-litre Mitsubishi-sourced 4G93P engine ("P" for Proton), originally found in the Mitsubishi Lancer GSR, but here without the turbo and with an increase in compression to compensate. The Satria GTi was developed and re-engineered as a traditional hot hatch by Lotus in Hethel, England. The Satria GTi could sprint from 0 to 60 mph in 8.5 seconds, making it among the fastest Proton production models ever produced.[7] A new body kit was also adopted for better aerodynamics. The Satria GTi also wore a 'Handling by Lotus' badge on the rear hatch.

The engine and handling of the Satria GTi were progressively updated and revised between 1998 and 2005. The Mitsubishi version was produced from 1998 until mid-2002. The VDO (Siemens) version had been in production from mid-2002 until 2005 when Proton ceased production.

The Proton Satria GTi launched in the United Kingdom in November 1999 with a £14,500 price tag. It was equipped with air-conditioning, ABS, dual front power windows, electric mirrors and Recaro seats.[7] Proton sold 160 units of the Satria GTi within its first six months in the U.K.[8]

Richard Hammond had reviewed the Proton Satria GTi alongside the more established Peugeot 206 GTi. The Satria GTi received more praise and approval as a traditional hot hatch, despite costing £500 more than the 206 GTi.[9]

A concept Proton Cabriolet was shown at the 1997 Frankfurt International Motor Show, with ambitions for sales in the UK from 1999 but this did not happen.[10]

The Proton Satria R3 is a limited edition Satria sold in Malaysia. It was officially soft-launched on 4 October 2004,[11] then made available for booking on 17 October 2004.[12] The term R3 stands for Race, Rally, Research. R3 is a redefined version of the Satria GTi by Proton's Racing development team in collaboration with Lotus. It houses the same 1800 cc Mitsubishi 4G93P engine but has undergone some minor adjustments by Lotus handling. The body shell has been improved with double stitch welded monocoque chassis with front and rear strut tower brace bars. Body weight has been lightened as well. It comes with Recaro SR4 semi-bucket seats, both Momo steering wheel and gear knob.

2011 Proton Satria Neo CPS H-Line.

In February 2009, Proton launched a CPS version of the Satria Neo, replacing the high-end H-Line version of the Satria Neo. It comes with an aggressively styled body kit and spoiler that pays homage to the Satria GTi. It is powered by a 1.6-litre CamPro CPS engine with 125 bhp (93 kW; 127 PS) and 150 N⋅m (110 lb⋅ft) of torque which reportedly does not suffer from the torque dip of older CamPro engines; however, the timing of the cam profile switching mechanism is slightly modified for aggressive driving – the CPS mechanism in the Satria Neo CPS changes from low cam to high cam at 4,400 rpm rather than at 3,800 rpm as in the other CPS-equipped models such as the Proton Waja and Proton Gen-2, as well as the Proton Exora.[14]

Specifications (CPS)

The 2008 model of Proton Satria R3 on display at the 2008 Melbourne Motor Show.

As a successor to the original Satria R3, Proton introduced a high performance version of the Satria Neo in 2008.[15] It features a naturally aspired 1.6-litre engine producing 100 kW (136 PS; 134 hp) or 110 bhp (82 kW; 112 PS), which Proton says will deliver a "controlled yet exciting driving experience". Other upgrades include a sportier bodykit, 17-inch wheels, a lowered suspension setup derived from Lotus, an improved braking system, Recaro lightweight seats and a MOMO steering wheel. All of the 50 examples produced come in Incognito Black with a unique "Race, Rally Research" decal on the side.[16]

The 25 unit-only Satria Neo R3 Lotus Racing was introduced on the 30 March 2010. Sold at RM115,000 this special version of the Neo features some improvements over its sibling, the Satria Neo CPS. The look is similar to that of the Satria Neo R3, but includes some exclusive equipment. The engine is R3-tuned with R3 Engine Management System, R3 Camshafts with adjustable alloy cams and R3 tuned exhaust system. R3 Division also used an R3 Carbon Fibre Air Intake with K&N Air Filter System.

The engine now produces 145 bhp (108 kW; 147 PS), approximately 13.8 percent more power than a normal CamPro CPS. with an improved torque of 168 N⋅m (124 lb⋅ft). Top speed reaches 205 km/h (127 mph) and the century run is achieved in 12.2 seconds.

The gear ratios were also revised to match the engine upgrade.

The chassis and handling were improved with the use of Ohlins Adjustable coilovers. The wheels are 16-inch Advantis with Bridgestone Adrenalin tyres. The brakes are from AP Racing consisting of AP Racing calipers and pads.

Interior-wise, the dash remains the same but it is now painted in a greenish accent to match Lotus' green Trademark. Few enhancements were put in place such as the engine start button, dark green Nappa leather and an alloy pedal set and gear knob.

In continuation of the legacy of the Satria Neo R3 Lotus Racing, Proton introduced the 2011 R3 Satria Neo[17] on 8 February 2011.[18] Available only in bright red, it costed RM79,797.00 and featured a built-in 2-DIN navigation system, the first in Proton's history. It was fitted with the old Satria Neo CPS bodykit mated to new R3 Design 16-inch alloy rims, R3 front and rear spoilers and side mouldings in addition to leather upholstery and various other R3 extras on the interior. Its handling and performance attributes remained unchanged over its Lotus Racing sibling.

Prior to its launch, the concept model for the 2011 Proton Satria Neo R3 was debuted during the Tokyo Auto Salon 2011.[19]

2013–2015 Proton Satria Neo R3

Proton launched the 2013 Satria Neo R3 on 29 November 2012.[20]

It is technically identical performance-wise to the Satria Neo CPS, but features the 2011 Satria Neo R3 bodykit and a significantly reduced price tag, costing between RM60,800 and RM64,250.

The roof of the 2013 Satria Neo R3 is painted according to the body colour. This differentiates it from the 2011 Satria Neo R3 which had a black roof. Optional decals and performance equipment such as ECU upgrades and full exhaust systems were also made available by Proton.

The 2013 Satria Neo R3 is fitted with dual airbags, ABS with EBD and is offered in manual and auto transmissions with a choice of 3 colours: silver, black and red.

Proton Satria Neo Super 2000 Rally Car.

Proton Motorsports' British based partner Mellors Elliot Motorsports (MEM) has prepared a FIA Super 2000 compliant Proton Satria Neo based on the road car's chassis.[21] It is powered by the same engine as found in the Proton Waja 1.8. The team's current drivers in 2011 on the Intercontinental Rally Challenge (IRC), starting with the Rally Monte Carlo is Chris Atkinson. He will contest on all six rounds of the 2011 Asia Pacific Rally Championship (APRC) and Per-Gunnar Andersson who drives the second car for the Proton team in the IRC events, while Alister McRae will continue to drive for Proton in the APRC.[22] McRae took the car to its first drivers and constructors titles in the 2011 APRC.

A pair of Proton Satria Neo S2000s were used in an episode of Top Gear, in a race between the British presenters and their Australian counterparts at Cornbury Park, a former Rally GB venue.

Proton Satria Neo CUSCO Edition.

Proton made its presence felt for the very first time in Japan when renowned Japanese automotive parts manufacturer Carrosser Co., Ltd. (CUSCO) officially unveiled at the Tokyo Auto Salon, a specially-developed Satria Neo rally car that will be sold in Japan. In January 2011, Proton announced that Japanese auto parts company CUSCO would be buying standard road-going Satria Neo body shells to engineer and homologate according to FIA Group N regulation competition use.

The Group N Proton Satria Neo rally cars will be based on stock standard road-registered 1600cc showroom models acquired by CUSCO, homologated according to FIA regulations for competition use, and retrofitted with CUSCO-developed aftermarket performance and race components. With the Satria Neo, CUSCO is essentially Proton's customer – they buy the body shells, equip them with CUSCO-developed race components, and then sell the completed Group N rally-going Neos to customers who will compete in Junior Rally Championships in Japan and Asia Pacific.

Veteran Malaysian rally driver, Karamjit Singh piloted a CUSCO-tuned Proton Satria Neo 2WD in which he crossed the line to finish first in the overall 2011 APRC 2WD category on May 2011 Rally of Queensland as well as first in the N2 category.

Three Satria Neos were fielded in the 2011 Japan Rally Championship in JN-3, one unit for the CUSCO Team and two for the CUSCO Junior Rally Team respectively. The latter finished with a class win in Rally Hokkaido 2011. In the 2012 season, only the Junior Rally Team drove the Satria Neos, whereas the CUSCO Team had replaced their unit with a Toyota 86.