Romanization of Russian

Scientific transliteration, also known as the International Scholarly System, is a system that has been used in linguistics since the 19th century. It is based on the Czech alphabet and formed the basis of the GOST and ISO systems.

OST 8483 was the first Soviet standard on romanization of Russian, introduced on 16 October 1935.[2]

Developed by the National Administration for Geodesy and Cartography at the USSR Council of Ministers, GOST 16876-71 has been in service for over 30 years and is the only romanization system that does not use diacritics. Replaced by GOST 7.79-2000.

This standard is an equivalent of GOST 16876-71 and was adopted as an official standard of the COMECON.

GOST 7.79-2000 System of Standards on Information, Librarianship, and Publishing–Rules for Transliteration of the Cyrillic Characters Using the Latin Alphabet is an adoption of ISO 9:1995. It is the official standard of both Russia and the Commonwealth of Independent States (CIS).

GOST 52535.1-2006 Identification cards. Machine readable travel documents. Part 1. Machine readable passports is an adoption of an ICAO standard for travel documents. It was used in Russian passports for a short period during 2010–2013 (see below). The standard was substituted in 2013 by GOST R ISO/IEC 7501-1-2013, which does not contain romanization, but directly refers to the ICAO romanization (see below).

Names on street and road signs in the Soviet Union were romanized according to GOST 10807-78 (tables 17, 18), which was amended by newer Russian GOST R 52290-2004 (tables Г.4, Г.5), the romanizations in both the standards are practically identical.

ISO/R 9, established in 1954 and updated in 1968, was the adoption of the scientific transliteration by the International Organization for Standardization (ISO). It covers Russian and seven other Slavic languages.

ISO 9:1995 is the current transliteration standard from ISO. It is based on its predecessor ISO/R 9:1968, which it deprecates; for Russian, the two are the same except in the treatment of five modern letters. ISO 9:1995 is the first language-independent, univocal system of one character for one character equivalents (by the use of diacritics) that faithfully represents the original and allows for reverse transliteration for Cyrillic text in any contemporary language.

The UNGEGN, a Working Group of the United Nations, in 1987 recommended a romanization system for geographical names, which was based on the 1983 version of GOST 16876-71. It may be found in some international cartographic products. [3]

American Library Association and Library of Congress (ALA-LC) romanization tables for Slavic alphabets (updated 1997) are used in North American libraries and in the British Library since 1975.

The formal, unambiguous version of the system for bibliographic cataloguing requires some diacritics, two-letter tie characters, and prime marks. The standard is also often adapted as a “simplified” or “modified Library of Congress system” for use in text for a non-specialized audience, omitting the special characters and diacritics, simplifying endings, and modifying iotated initials.[4][5]

British Standard 2979:1958 is the main system of the Oxford University Press,[6] and a variation was used by the British Library to catalogue publications acquired up to 1975—the Library of Congress system (ALA-LC) is used for newer acquisitions).[7]

The BGN/PCGN system is relatively intuitive for Anglophones to read and pronounce. In many publications, a simplified form of the system is used to render English versions of Russian names, typically converting ë to yo, simplifying -iy and -yy endings to -y, and omitting apostrophes for ъ and ь. It can be rendered using only the basic letters and punctuation found on English-language keyboards: no diacritics or unusual letters are required, although the interpunct character (·) may be used to avoid ambiguity.

This particular standard is part of the BGN/PCGN romanization system which was developed by the United States Board on Geographic Names and by the Permanent Committee on Geographical Names for British Official Use. The portion of the system pertaining to the Russian language was adopted by BGN in 1944 and by PCGN in 1947.

In Soviet international passports, transliteration was based on French rules but without diacritics and so all names were transliterated in a French-style system.[8]

In 1997, with the introduction of new Russian passports, a diacritic-free English-oriented system was established by the Russian Ministry of Internal Affairs,[8][9] but the system was also abandoned in 2010.

In 2006, GOST 52535.1-2006 was adopted, which defines technical requirements and standards for Russian international passports and introduces its own system of transliteration. In 2010, the Federal Migratory Service of Russia approved Order No. 26,[10] stating that all personal names in the passports issued after 2010 must be transliterated using GOST 52535.1-2006. Because of some differences between the new system and the old one, citizens who wanted to retain the old version of a name's transliteration, especially one that had been in the old pre-2010 passport, could apply to the local migratory office before they acquired a new passport. The standard was abandoned in 2013.

In 2013, Order No. 320[11] of the Federal Migratory Service of Russia came into force. It states that all personal names in the passports must be transliterated by using the ICAO system, which is published in Doc 9303 "Machine Readable Travel Documents, Part 3". The system differs from the GOST 52535.1-2006 system in two things: ц is transliterated into ts (as in pre-2010 systems), ъ is transliterated into ie (a novelty).

⁰ Unicode recommends encoding the primes used for the soft and hard signs as modifier prime and double prime, ʹ and ʺ, which may be entered with {{softsign}} and {{hardsign}}, and the apostrophes for the same as the modifier letter apostrophes, ʼ and ˮ.

Scholarly

¹ Some archaic letters are transcribed in different ways.

GOST 16876-71 and GOST 7.79-2000

³ It is recommended to use c before i, e, y, j, but cz in all other cases.

⁴ In GOST 7.79-2000 Cyrillic і in Ukrainian and Bulgarian is always transliterated as Latin i as well as in Old Russian and Old Bulgarian texts where it is usually used before vowels. In the rare case that it falls before a consonant (for example, in the word міръ), it is transliterated with an apostrophe i’.

Street and road signs

⁵ е = ye initially, after vowels, and after ъ and ь.

⁶ ё

= ye after consonants except ч, ш, щ, ж (ch, sh, shch, zh);

= e after ч, ш, щ, ж (ch, sh, shch, zh);

= yo initially, after vowels, and after ъ and ь.

ALA-LC

⁷ ъ is not romanized at the end of a word.

British Standard

⁸ Diacritics may be omitted when back-transliteration is not required.

⁹ тс is romanized t-s to distinguish it from ц = ts.

¹⁰ ъ is not romanized at the end of a word.

¹¹ The British Library uses ы = ui, ый = uy.

BGN/PCGN

¹² The digraphs ye and yë are used to indicate iotation at the beginning of a word, after vowels, and after й, ъ or ь.

¹³ An optional middle dot (·) may be used to signify:

• non-digraphs (тс = t·s, шч = sh·ch);
• y· = й before а, у, ы, э (йа = y·a, йу = y·u, йы = y·y, йэ = y·e);
• y· = ы before а, у, ы, э (ыа = y·a, ыу = y·u, ыы = y·y, ыэ = y·e);
• ·y = ы after vowels;
• ·e = э after consonants except й.

Passport (1997)

¹⁴ ye after ь.

¹⁵ ий is either iy or y, and ый is either y or yy.