South Arm Highway

The South Arm Highway (part of the B33 road route) is a highway serving the southern suburbs of Hobart, on the eastern shore of the River Derwent in Tasmania, Australia. The highway is a major trunk road that carries heavy commuter traffic south from the Eastern Outlet to Howrah and Rokeby. As one of the Tasman Highway's principle Feeders and one of the eastern shore's major transport corridors, The South Arm Highway facilitates the movement of traffic between the suburbs and satellite communities to the south with the city centre and ultimately, other major cross city highways. With annual average daily traffic (AADT) of 17,000,[2] the highway is considered a major traffic corridor within Hobart. The designation "South Arm Highway" arises from its journey south (via Rokeby Road) to South Arm.

South Arm Highway

South Arm Highway at Howrah
South Arm Highway
Coordinates
  • 42°52′0″S 147°23′55″E
General information
TypeHighway
Length4.2 km (2.6 mi)[1]
Opened1989[2]
Route number(s) B33
Major junctions
North end Tasman Highway (A3), Mornington
 
  • Cambridge Road (C329)
  • Mornington Road
  • Shoreline Drive
South end Rokeby Road (B33), Howrah
Location(s)
RegionHobart
Highway system

Route description

South Arm Highway's northern end is at a grade-separated interchange with the Tasman Highway, at the boundary of Warrane and Mornington. The road continues north from the interchange as Flagstaff Gully Link to Flagstaff Gully, while immediately to the south is a roundabout with Cambridge Road, which carries the C329 road route towards Mornington. Only 150 metres (490 ft) south of the roundabout is a T junction with Mornington Road, for access to the Mornington Business Estate. The highway continues south past the industrial area, and then curves to the south-east around the Waverley Flora Park. After entering the residential suburb of Howrah, South Arm Highway continues south-east to intersect Shoreline Drive at a large roundabout. Beyond this intersection, the highway passes through a reverse curve to reach its southern terminus at Oceana Drive. Rockeby Road continues on from the highway, as single-carriageway road, towards South Arm.[1]

The highway is assigned the road route B33,[3] and in 2007, the annual average daily traffic volume was 17,000.[2]

History

In 1965, a major Transportation Study was commissioned for the Hobart metropolitan area proposing the construction of several freeways to service the city, including a major south bound freeway servicing the eastern shore of the Derwent River.[4] The Southeastern Freeway was intended to run south from the Tasman Highway, to the head of Kangaroo Bay, across the second beach and along through wirksworth, and to Rokeby.[4][5] Some land was acquired but construction of the road never began.[5] The Freeway was deemed to be unrealistic in that it was too expensive and would have come in close proximity to Schools and other vital services.[6]

Bellerive Bypass

The concept of providing a major arterial road to Howrah was revisited with the release of the "Hobart Transport Revision" several years later.[6][7] This new proposal entailed construction of a major road in an undeveloped corridor, bypassing Bellerive.[6] Featuring a dual carriageway alignment, The first stage was opened in 1989.[2] The Highway intersects the Tasman Highway at Mornington and then proceeds south through the Meehan Range before passing a large roundabout at Howrah. While the earthworks were completed in the first stage, the final one km (0.62 mi) proceeded as single carriageway to the old South Arm Highway alignment. Completion of the bypass replaced Clarence Street as the major trunk road connecting South Arm and Hobart which passed through Bellerive and Rosny. The final section of the bypass was completed in 2009, with the duplication of the South Arm Highway to Oceana Drive.[8] Originally planned to be fully grade-separated, the highway is currently limited-access with at-grade intersections.

Exits

The entire highway is in the City of Clarence local government area.

Locationkm[1]miDestinationsNotes
WarraneMornington boundary00.0 Tasman Highway eastbound ramps (A3) / Flagstaff Gully Link north  Sorell, Flagstaff GullyNorthern highway terminus; interchange with eastbound exit via loop ramp
0.240.15 Tasman Highway westbound ramps (A3) Hobart
0.300.19 Cambridge Road (C329 east)  Mornington, Warrane, Rosny Park, BelleriveRoundabout
Mornington0.450.28Mornington Road – Mornington Business EstateT junction
Howrah3.11.9Shoreline Drive east & south-west / Lorne Crescent northRoundabout; no entry from Lorne Crescent
4.22.6 Rokeby Road (B33) east / Merindah Street north / Oceana Drive south  Rokeby, Lauderdale, Opossum BaySouthern highway terminus; traffic light intersection
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

  • List of Highways in Hobart

References

  1. Google (11 June 2014). "South Arm Highway" (Map). Google Maps. Google. Retrieved 11 June 2014.
  2. "South Arm Highway, Shoreline Drive to Oceana Drive - Duplication" (PDF). Parliament of Tasmania. 2007. Retrieved 9 February 2014.
  3. Department of Primary Industries, Parks, Water & Environment (January 2014). "Tasmanian Road Route Codes: Route descriptions and focal points" (PDF). Version 2.7. Government of Tasmania. p. 12. Archived (PDF) from the original on 11 June 2014. Retrieved 10 April 2014.CS1 maint: multiple names: authors list (link)
  4. Hobart Area Transportation Study. Hobart, Tasmania: Wilbur Smith and Associates. 1965.
  5. "Decades of development, 1949–1974" (PDF). Clarence City Council. 2012. Retrieved 8 February 2014.
  6. Hobart Transport Revision. Hobart, Tasmania: Department of Public Works. 1970.
  7. "Traffic intrusion into residential areas: Bellerive". Transportation Research Board. 2012. Retrieved 8 February 2014.
  8. "Highway Upgrade page" (PDF). Department of Infrastructure, Energy and Resources. 2007. Retrieved 26 April 2009.

Media related to South Arm Highway at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.