Sustain pedal
A sustain pedal or sustaining pedal (also called damper pedal, loud pedal, or open pedal[1]) is the most commonly used pedal in a modern piano. It is typically the rightmost of two or three pedals. When pressed, the sustain pedal "sustains" all the damped strings on the piano by moving all the dampers away from the strings and allowing them to vibrate freely. All notes played will continue to sound until the vibration naturally ceases, or until the pedal is released.
.png.webp)
This lets the pianist sustain notes which would otherwise be out of reach, for instance in accompanying chords, and accomplish legato passages (smoothly connected notes) which would have no possible fingering otherwise. Depressing the sustain pedal also causes all the strings to vibrate sympathetically with whichever notes are being played, which greatly enriches the piano's tone.
History
A device similar to the sustain pedal in effect was invented by the piano pioneer Gottfried Silbermann; it was operated by the player's hands rather than a pedal. A later eminent early builder, Johann Andreas Stein, may have been the first to allow the player to lift the dampers while still playing; his device was controlled by a knee lever.
Until the onset of the Romantic era in music, the sustain pedal was considered a special effect, used only in particular circumstances. Only with the Romantics did a fairly constant use of the pedal come to be regarded as an essential element of piano sound.
Specifying pedaling in musical compositions
Appropriate use of the pedal is often left to the musician's discretion, but composers and music editors also use pedal marks to notate it. A common symbol for this is a horizontal line below the grand staff, which lifts up and down with the pedal. An alternative (and older) notation is the use of 
indicating where the sustain pedal should be depressed, and an asterisk 
showing where it should be lifted (see Für Elise for a famous example). Occasionally there is a general direction at the start of a movement instructing that the sustain pedal be applied continuously throughout. This may be marked with senza sordini ("without dampers"), or similar wording.
In General MIDI, the sustain pedal information is controlled by Control Change number 64 (CC 64).[2]
Sostenuto pedal
The sostenuto pedal is a similar device that sustains only notes which are depressed at the time the pedal is depressed. It is the usual middle of three pedals; but in some upright pianos the middle pedal instead lowers a veil of felt between the hammers and the strings to function as a mute.
Half pedaling
For mechanical pianos it is possible to press down the sustain pedal only partially such that the dampers just touch the strings very slightly. This technique for the advanced pianist is called half pedaling and allows a fine variation of the sound. It can be observed that with half pedaling the damping is more effective for the higher tones. An example for a musical piece that is played with half pedaling by some pianists is Beethoven's Moonlight Sonata. Most recent digital pianos also support this effect.
Other instruments
- Electronic keyboards often include a sustain pedal, a simple foot-operated switch which controls the electronic or digital synthesis so as to produce a sustain effect. Several recent models use more sophisticated pedals that have a variable resistance, allowing half pedaling.
- Metallophones such as vibraphones, tubular bells, and high-end glockenspiels[3] have sustain pedals that allow the metal bars to ring.
- The Cimbalom has a sustain (or damper) pedal which allows its strings to ring or abruptly mutes them.
See also
References
- Ripin, Edwin M. (2001). "Sustaining pedal". In Root, Deane L. (ed.). The New Grove Dictionary of Music and Musicians. Oxford University Press.
- NickFever. "MIDI CC List". NickFever. Retrieved 2020-08-27.
- "YG-2500 - Overview - Yamaha - United States". usa.yamaha.com. Retrieved 2020-08-27.