Swan 60
The Swan 60 was designed by German Frers and first launched in 1994. The first one produced was a highly customised performance version called Highland Fling which had notable racing success. The model evolved into a regatta version and the cruiser/racer (this had a transom extension and increased displacement etc.) although most boats were customised to some level. The hull moulding was used for the Swan 62 RS a cruising model to go alongside the newly designed racer/cruiser the Swan 601 however this model (the Swan 60) was effectively relaunched under Swan 62 "FD" version banner after a couple of years.
| Development | |
|---|---|
| Designer | German Frers |
| Location | Finland |
| Year | 1994 – 2003 |
| No. built | 28 |
| Brand | Swan |
| Builder(s) | OY Nautor AB |
| Boat | |
| Boat weight | 23,500 kg (51,800 lb) |
| Draft | 3.47 m (11.4 ft) |
| Hull | |
| General | Regatta & Cruiser Racer Versions |
| Type | Monohull |
| LOH | 18.85 m (61.8 ft) |
| LWL | 15.45 m (50.7 ft) |
| Beam | 5.35 m (17.6 ft) |
| Engine type | YANMAR 4JH3 100hp |
| Hull appendages | |
| Ballast | 8,750 kg (19,290 lb) |
| Sails | |
| Mainsail area | 108.8 m2 (1,171 sq ft) |
| Jib/genoa area | 121.5 m2 (1,308 sq ft) |
| Spinnaker area | 293 m2 (3,150 sq ft) |
External links
References
- "Archived copy". Archived from the original on 2016-08-18. Retrieved 2016-07-12.CS1 maint: archived copy as title (link)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.