Takeoff Acceleration Monitoring System
A Takeoff Acceleration Monitoring System automates the pilot monitoring of Distance to Go (DTG), "to sense, in a timely fashion the development of insufficient acceleration, which would extend the takeoff roll, perhaps precipitously".[1]
Over the years, recommendations have been made to develop a Take Off Performance Management System. The NLR and NASA developed TOPMS prototypes. However, these systems were never operationally introduced.[2]
EASA established two working groups (WGs) to address this issue. WG-88 focussed on the specification and standardization of On-Board Weight and Balance Systems (OBWBS), an ongoing effort for what is considered to be a feasible option. WG-94 focussed on standards and operational conditions for a TOPMS; it WG-94 was concluded early 2017, considering that TOPMS was not feasible, in particular due to limitations in technology and data availability.[2]
A version suitable for detecting gross errors, which can be integrated in existing avionics, has been proposed by National Aerospace Laboratory (NLR), KLM, and Martinair.[2]
A 2019 research paper explores the cause of a July 2017 serious incident, caused by erroneous data entry, where such system could have been useful. It "summarises a basic takeoff acceleration monitoring system and the effect this would have had on the July 2017 event".[3]
Related inventions
- Airplane takeoff and landing performance monitoring system[4]
References
- Brown; Abbasi (2009-04-23). "Takeoff performance monitoring systems, technology, certificatability and operability status". National Research Council Canada. Lay summary.
- Benard, Bart (2019). "Take-Off performance incidents: do we need to accept them or can we avoid them?" (PDF). ISASI Technical Papers.
- Hoare, Steve (2019). "Erroneous takeoff performance: Why the past is still highly relevant today" (PDF). ISASI Technical Papers.
- Middleton (March 12, 1996). "Airplane takeoff and landing performance monitoring system". NASA. hdl:2060/20080005969. Lay summary. Cite journal requires
|journal=
(help)