Tetramethylsilane

Tetramethylsilane (abbreviated as TMS) is the organosilicon compound with the formula Si(CH3)4. It is the simplest tetraorganosilane. Like all silanes, the TMS framework is tetrahedral. TMS is a building block in organometallic chemistry but also finds use in diverse niche applications.

Tetramethylsilane
Ball-and-stick model
Space-filling model
Names
Preferred IUPAC name
Tetramethylsilane
Identifiers
3D model (JSmol)
Abbreviations TMS
1696908
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.000.818
EC Number
  • 200-899-1
MeSH Tetramethylsilane
RTECS number
  • VV5705400
UNII
UN number 2749
Properties
C4H12Si
Molar mass 88.225 g·mol−1
Appearance Colourless liquid
Density 0.648 g cm−3
Melting point −99 °C (−146 °F; 174 K)
Boiling point 26 to 28 °C (79 to 82 °F; 299 to 301 K)
Solubility organic solvents
Structure
Tetrahedral at carbon and silicon
0 D
Hazards
F+
R-phrases (outdated) R12
S-phrases (outdated) S16, S3/7, S33, S45
NFPA 704 (fire diamond)
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
4
3
1
Flash point −28 – −27 °C
Related compounds
Related silanes
Silane

Silicon tetrabromide
Silicon tetrachloride
Silicon tetrafluoride
Silicon tetraiodide
Hexamethyldisilane

Related compounds
Neopentane

Tetramethyltin

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Synthesis and reaction

TMS is a by-product of the production of methyl chlorosilanes, SiClx(CH3)4x, via the direct process of reacting methyl chloride with silicon. The more useful products of this reaction are those for x = 1 (trimethylsilyl chloride), 2 (dimethyldichlorosilane), and 3 (methyltrichlorosilane).[1]

TMS undergoes deprotonation upon treatment with butyllithium to give (H3C)3SiCH2Li. The latter, trimethylsilylmethyl lithium, is a relatively common alkylating agent.

In chemical vapor deposition, TMS is the precursor to silicon dioxide or silicon carbide, depending on the deposition conditions.

Uses in NMR spectroscopy

Tetramethylsilane is the accepted internal standard for calibrating chemical shift for 1H, 13C and 29Si NMR spectroscopy in organic solvents (where TMS is soluble). In water, where it is not soluble, sodium salts of DSS, 2,2-dimethyl-2-silapentane-5-sulfonate, are used instead. Because of its high volatility, TMS can easily be evaporated, which is convenient for recovery of samples analyzed by NMR spectroscopy.[2]

Because all twelve hydrogen atoms in a tetramethylsilane molecule are equivalent, its 1H NMR spectrum consists of a singlet.[3] The chemical shift of this singlet is assigned as δ 0, and all other chemical shifts are determined relative to it. The majority of compounds studied by 1H NMR spectroscopy absorb downfield of the TMS signal, thus there is usually no interference between the standard and the sample. Similarly, all four carbon atoms in a tetramethylsilane molecule are equivalent.[3] In a fully decoupled 13C NMR spectrum, the carbon in the tetramethylsilane appears as a singlet, allowing for easy identification. The chemical shift of this singlet is also set to be δ 0 in the 13C spectrum, and all other chemical shifts are determined relative to it.

Commercial NMR solvents often are supplied without TMS. 1H NMR spectra can be calibrated against residual protio-solvent (e.g. the remaining 0.1% or so of undeuterated chloroform in commercial CDCl3). As deuterium is not observed in 1H NMR, the residual protio-solvent signals can be observed clearly. For 13C NMR work, spectra are usually calibrated against the deuterated solvent peak. For example, deuterated chloroform shows a triplet of equal height at δ 77.0. [4] The triplet is explained by applying the 2nI + 1 rule; for the case of deuterium, I = 1. Tables and charts of chemical shifts for various types of NMR spectroscopy are often provided by vendors of NMR solvents. Work has also been done to prepare comprehensive tables of chemical shifts of solvents and impurities.[5][6]

References

  1. Elschenbroich, C. (2006). Organometallics. Weinheim: Wiley-VCH. ISBN 978-3-527-29390-2.
  2. Mohrig, Jerry R.; Noring Hammond, Christina; Schatz, Paul F. (January 2006). Techniques in Organic Chemistry (Google Books excerpt). pp. 273–274. ISBN 978-0-7167-6935-4.
  3. The Theory of NMR - Chemical Shift
  4. The Theory of NMR - Solvents for NMR spectroscopy
  5. Gottlieb, Hugo E.; Kotlyar, Vadim; Nudelman, Abraham (1997). "NMR Chemical Shifts of Common Laboratory Solvents as Trace Impurities". The Journal of Organic Chemistry. 62 (21): 7512–7515. doi:10.1021/jo971176v. PMID 11671879.
  6. Fulmer, Gregory R.; Miller, Alexander J. M.; Sherden, Nathaniel H.; Gottlieb, Hugo E.; Nudelman, Abraham; Stoltz, Brian M.; Bercaw, John E.; Goldberg, Karen I. (2010). "NMR Chemical Shifts of Trace Impurities: Common Laboratory Solvents, Organics, and Gases in Deuterated Solvents Relevant to the Organometallic Chemist" (PDF). Organometallics. 29 (9): 2176–2179. doi:10.1021/om100106e.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.