Waco CG-13

The Waco CG-13 was an American military transport glider aircraft developed during World War II.

CG-13
The XCG-13
Role Transport Glider
Designer Waco Aircraft Company
First flight 1943
Introduction 1945
Retired 1945
Primary users USAAF
RAF
Produced 1945
Number built 135

Design and development

Wright Field Glider Branch realized a need for a glider larger than the CG-4A and requested designs. The response by several companies produced designs for five larger gliders. One of these designs was the XCG-13 by Waco Aircraft Company of Troy, Ohio.

The XCG-13 contract was for a 30-place design with an 8,000 lb (3,600 kg) useful load capacity to fly 174 mph (280 km/h) at an altitude of 12,000 feet (3,700 m) altitude. Flight testing of the prototype was performed at Clinton County Army Air Field and the type was approved on 10 March 1943. Testing found that a tricycle landing gear should be used, and that a hydraulic system be incorporated to open the top-hinged nose opening. These features were incorporated into the second XCG-13.

Ford Motor Company at Kingsford, Michigan and Northwestern Aeronautical at St. Paul, Minnesota built YCG-13 models [1] and were given contracts to build the production CG-13A. WACO was not given a production contract. Northwestern Aeronautical built 49 production articles. Ford built 48 as 30 place and 37 as 42 place by adding a bench down the center of the cargo section. Between the two companies, 268 contracted articles were canceled in favor of producing more CG-4A gliders.

Operational career

The CG-13A glider maximum useful load was 10,200 lb (4,600 kg). The 79 mph (127 km/h) stall speed was 19 mph higher than specified. One CG-13A was flown in combat in the Appari Mission in the Philippines. The CG-13A gliders were not flown in combat in Europe but were used as transports in England and France.

Specifications (CG-13A)

Data from The Concise Guide to American Aircraft of World War II,[2] Fighting Gliders of World War II[3]

General characteristics

  • Crew: 2 pilots
  • Capacity: 1x M2A1 105mm howitzer, 1x ½-ton 4 x 4 truck, ammunition, and gun crew; or 1x 1-ton 6 x 6 truck ; 30 or 40 troops, equipped.
  • Length: 54 ft 4 in (16.56 m)
  • Wingspan: 85 ft 8 in (26.11 m)
  • Height: 20 ft 3 in (6.17 m)
  • Wing area: 873 sq ft (81.1 m2)
  • Aspect ratio: 8.41
  • Airfoil: NACA 43012[4]
  • Empty weight: 8,700 lb (3,946 kg)
  • Gross weight: 18,900 lb (8,573 kg)

Performance

  • Stall speed: 79 mph (127 km/h, 69 kn) Flaps down
83 mph (72 kn; 134 km/h) Flaps up
  • Towing speed: 135 mph (117 kn; 217 km/h)
  • Never exceed speed: 195 mph (314 km/h, 169 kn)
150 mph (130 kn; 241 km/h) with flaps down
  • Wing loading: 21.65 lb/sq ft (105.7 kg/m2)

See also

Related development

Aircraft of comparable role, configuration, and era

Related lists

Operators
 United Kingdom
 United States

References
  1. "Largest Glider." Popular Science, March 1944, p. 66, bottom of page.
  2. Mondey 1996, p. 235
  3. Mrazek, James E. (1 January 1977). Fighting Gliders of World War II (1st ed.). London: St. Martin's Press. pp. 124–127. ISBN 978-0-312-28927-0.
  4. Lednicer, David. "The Incomplete Guide to Airfoil Usage". m-selig.ae.illinois.edu. Retrieved 16 April 2019.
  • Mondey, David, The Concise Guide to American Aircraft of World War II. London: Chancellor, 1996. I185152 706 0.SBN
  • Silent Ones WWII Invasion Glider Test and Experiment Clinton County Army Air Field Wilmington Ohio
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.