Wet strength

The wet strength of paper and paperboard is a measure of how well the web of fibers holding the paper together can resist a force of rupture when the paper is wet. Wet strength is routinely expressed as the ratio of wet to dry tensile force at break.[1]

With combined board such as corrugated fiberboard or with laminations, wet strength also includes the ability to stay intact under humid or wet conditions. Wet strength adhesives are often needed.

Mechanism

The cellulose fibreweb of paper is mainly held together by hydrogen bonds. These are dependent on physical contact between the fibres and can be broken by wetting of the fibres. The residual strength of a wetted paper can be less than 10% of the original strength.[1]

Various techniques, such as refining of the pulp and wet pressing on the paper machine can be used to reduce the strength loss of the paper upon wetting. To improve the wet strength it is common to use chemicals. The use of chemicals can retain as much as 10% to 30% of the original dry strength of the paper.[1] The wet strength chemicals may improve the dry strength of the paper as well.

A Japanese research team found that the effect of humidity on cardboard differs depending on how it is dispersed. Ultrasonic mist reduces the wet strength of cardboard more so than nano-mist.[2]

Wet strength chemicals
See also: Sizing

Wet strength chemicals improve the tensile properties of the paper both in wet and dry state by crosslinking the cellulose fibres with covalent bonds that do not break upon wetting.

Different wet strength chemicals are in use, like wet strength resins or neutral sizing agents. Normal wet strength resins are: urea-formaldehyde (UF), melamine-formaldehyde (MF) and polyamide-epichlorohydrin (PAE). Neutral sizing agents are alkylketene dimers (AKD) and alkenylsuccinic anhydride (ASA). In recent years, efforts have been devoted to develop environmentally friendly wet strength resins from renewable resources.[3]

Coatings

Sometimes wet strength can be obtained by curtain coating a polymer onto a paper or paperboard. Laminating a plastic film is also a method of providing wet strength.

Applications

A wide range of paper materials are wet strengthened:

Environmental considerations

Recycling of wet strengthened paper requires higher intensity reworking conditions in the re-pulping process to break the fibre web. Some wet strength papers are not considered recyclable.

References
  1. Neimo, Leo, ed. (1999). "13". Papermaking Chemistry. Papermaking Science and Technology. 4. Helsinki, Finland: Fapet OY. pp. 289–301. ISBN 952-5216-04-7.
  2. Hung, Duong Van; Nakano, Yusuke; Tanaka, Fumihiko; Hamanaka, Daisuke; Uchino, Toshitaka (30 November 2010). "Preserving the strength of corrugated cardboard under high humidity condition using nano-sized mists". Composites Science and Technology. 70 (40): 2123–2127. doi:10.1016/j.compscitech.2010.08.011.
  3. "Development of wet strength additives from wheat gluten".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.