Wine cork

Wine corks are a stopper used to seal wine bottles. They are typically made from cork (bark of the cork oak), though synthetic materials can be used. Common alternative wine closures include screw caps and glass stoppers. 68 percent of all cork is produced for wine bottle stoppers.

A French wine cork

Corks are manufactured for still wines as well as sparkling wines; the latter are bottled under pressure, forcing the corks to take on a mushroom shape. They are fastened with a wire cage known as a muselet.

History
Synthetic corks

As late as the mid-17th century, French vintners did not use cork stoppers, using instead oil-soaked rags stuffed into the necks of bottles.[1] The inventor of cork-based wine stoppers is unknown. Colloquial stories attribute the Benedictine monk Dom Pérignon. The stoppers date to about the 1600s. In the early 21st century, the problem of cork taint became prevalent, leading many producers to stop using corks in favor of alternatives. Screw caps became especially prominent in Australia and New Zealand by 2010. Most cork was sourced from around the Mediterranean Basin, far from the Oceanian countries.[2]

Following issues with cork taint, the cork industry invested in new techniques and equipment, reducing TCA chemicals in wine by 95 percent. Cork producers began promoting the cork's environmental and economic benefits.[2]

Production
Manual corking machine, manufactured c. 1870

Like other cork products, natural wine corks are derived from the bark of cork oak trees. The bark is carefully peeled away and cut into sheets before processing. The oak trees are not cut down, and only about half of its bark is removed at any time. Cork oaks are first harvested at 25 years old, and take place every 9 years. After the third harvest, the bark is of sufficient quality for producing wine corks.[3]

Portugal is the largest producer of corks, at 52.5 percent, followed by Spain, Italy, and Algeria. The majority of Portugal's production is in the region of Alentejo, at 72 percent of national production.[3] 68 percent of all cork is produced for wine bottle stoppers.[2][3]

Products

Corks can be made in several ways:[4]

  • Natural cork stoppers are made from a single piece of bark, and have the best flexibility, keeping the seal strong for aging wine for over 5 years.
  • Colmated corks are made from a single piece of bark, but have pores filled with glue and cork dust. They are easier to remove from a bottle, and are good for medium aging.
  • Multi-piece corks have two or more pieces glued together. They are denser than single-piece corks, and are not good for prolonged aging.
  • Agglomerated corks are made of cork dust and glue, and are dense, inexpensive, and not good for sealing wine for over a year.
  • Technical corks are agglomerated corks with single pieces of cork on either end.

Attributes

Cork stoppers are moisture-resistant, are slow to deteriorate, they help wine age, and provide a waterproof seal. The stoppers are associated with a perception of high quality wine, especially as cheaper alternatives are common with lower-cost wine.[2]

Because of the cellular structure of cork, it is easily compressed upon insertion into a bottle and will expand to form a tight seal. The interior diameter of the neck of glass bottles tends to be inconsistent, making this ability to seal through variable contraction and expansion an important attribute. However, unavoidable natural flaws, channels, and cracks in the bark make the cork itself highly inconsistent. In a 2005 closure study, 45% of corks showed gas leakage during pressure testing both from the sides of the cork as well as through the cork body itself.[5]

A study conducted by PricewaterhouseCoopers and commissioned by the major cork manufacturer Amorim concluded that cork is the most environmentally responsible stopper, in a one-year life cycle analysis comparison with plastic stoppers and aluminum screw caps.[6][7]

Reuse
Christmas decor from repurposed corks

While many synthetic corks can be recycled at home, natural corks can either be composted or recycled at specific stores. Companies partner with stores to accept used corks and recycle them into other products; ReCork is the largest of these companies in the United States.[8]

Corks are also popularly reused in arts and crafts.[8]

Types

Still wine

Corks typically are 24–25 millimetres (0.94–0.98 in) in diameter. Lengths vary, usually based on length of time estimated to age the wine. Simple wines are commonly 38 millimetres (1.5 in) long, medium aging wines (the most popular size) are 44 millimetres (1.7 in), and long aging or expensive wines are often 49–55 millimetres (1.9–2.2 in) long.[9]

Sparkling wine
Cork and muselet on a bottle of Franciacorta
Champagne corks before and after usage

Sparkling wine corks are typically 30 millimetres (1.2 in) in diameter and 50 millimetres (2.0 in) in length. When pushed into the bottle, the corks are compressed to about 60–70 percent of their original diameters.[9] The corks are held in place by wire cages known as muselets.

Sparkling wine corks are mostly built from three sections and are referred to as agglomerated corks. The mushroom shape that occurs in the transition is a result of the bottom section's being composed of two stacked discs of pristine cork cemented to the upper portion, which is a conglomerate of ground cork and glue. The bottom section is in contact with the wine. Before insertion, a sparkling wine cork is almost 50% larger than the opening of the bottle. Originally, the cork starts as a cylinder and is compressed before insertion into the bottle. Over time, their compressed shape becomes more permanent and the distinctive "mushroom" shape becomes more apparent.

The aging of the wine post-disgorgement can to some degree be told by the cork, as, the longer it has been in the bottle, the less it returns to its original cylinder shape.

References
  1. Prlewe, J. Wine From Grape to Glass. New York: Abbeville Press, 1999, p. 110.
  2. John Gifford (2016-02-25). "How Millennials (Almost) Killed the Wine Cork". The Atlantic. Retrieved 2020-02-27.
  3. João Santos Pereira, Miguel Nuno Bugalho, Maria da Conceição Caldeira (2008). "From the Cork Oak to cork" (PDF). APCOR. Retrieved February 28, 2020.CS1 maint: uses authors parameter (link)
  4. "Corks". APCOR. Retrieved February 28, 2020.
  5. Gibson, Richard, Scorpex Wine Services (2005). "variability in permeability of corks and closures" (PDF). Archived from the original (PDF) on May 12, 2013.
  6. "Evaluation of the environmental impacts of Cork Stoppers versus Aluminium and Plastic Closures: Analysis of the life cycle of Cork, Aluminium and Plastic Wine Closures" (PDF). December 4, 2008.
  7. Easton, Sally. "Cork is the most sustainable form of closure, study finds". Decanter. Retrieved February 26, 2020.
  8. https://www.bustle.com/p/can-you-recycle-wine-corks-heres-how-you-can-best-dispose-of-them-18010016
  9. Yair Margalit, PhD (November 2012). Concepts in Wine Technology, Small Winery Operations, Third Edition – Yair Margalit, PhD – Google Books. ISBN 9781935879787. Retrieved 2020-02-27.
  • Media related to Corks at Wikimedia Commons
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.