1996–97 South Pacific cyclone season

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	November 23 – November 26
Peak intensity	85 km/h (50 mph) (10-min)  987 hPa (mbar)

The storm produced heavy rains and high winds over New Caledonia before dissipating.[11]

Category 3 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration	December 20 – December 30
Peak intensity	150 km/h (90 mph) (10-min)  955 hPa (mbar)

Fergus was a Category 2 storm that formed in the Pacific Ocean, lasting from 29 December to 31 December 1996 until becoming extratropical near New Zealand. The storm dropped heavy rainfall across an already saturated area, with totals of over 16.5 inches (425 mm) near Thames. The rainfall led to widespread flooding and forced many to evacuate. Severe road damage occurred, with some roads remaining closed for over a week. Gusty winds from Fergus downed trees and power lines, and caused property damage.[12] Cyclone Fergus brought torrential rain and damaging winds to parts of the North Island of New Zealand. There was no loss of life, in part because of timely warnings about the ferocity of the storm.[13] Damages from the storm were at least $2 million.[14]

Category 3 severe tropical cyclone (Australian scale)
Category 3 tropical cyclone (SSHWS)
Duration	January 3 – January 10
Peak intensity	155 km/h (100 mph) (10-min)  945 hPa (mbar)

On January 8, the weakening Cyclone Drena brushed the island of New Caledonia with sustained winds up to 150 km/h (90 mph 10-minute winds).[15] Heavy rains accompanied the storm, peaking at 474 mm (18.7 in) in Dzumac. La Foa also recorded 202 mm (8.0 in) of rain. Wind gusts reached 165 km/h (105 mph) in Koumac. Flooding from the storm caused a total loss of crops and the high winds knocked out power and communication to most of the island.[16][17]

Category 3 severe tropical cyclone (FMS)
Category 1 tropical cyclone (SSHWS)
Duration	January 10 – January 16
Peak intensity	130 km/h (80 mph) (10-min)  965 hPa (mbar)

Severe Tropical Cyclone Evan formed on January 10 and dissipated on January 16. Evan stayed northeast of New Zealand for its entire lifetime. Sustained winds peaked at 120 km/h (75 mph).

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	January 26 – February 2
Peak intensity	110 km/h (70 mph) (10-min)  980 hPa (mbar)

Tropical Cyclone Freda existed from January 26 to February 2.

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	February 19 – February 24
Peak intensity	110 km/h (70 mph) (10-min)  975 hPa (mbar)

The storm produced large swells along west-facing coasts of New Caledonia.[18]

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	February 24 – February 27
Peak intensity	110 km/h (70 mph) (10-min)  975 hPa (mbar)

On February 21, the NPMOC started to monitor a tropical disturbance that had developed about 835 km (520 mi) to the northeast of Avarua on the Southern Cook Island of Rarotonga.[19] Over the next two days the disturbance gradually developed further as it moved towards the southwest, before RSMC Nadi and TCWC Wellington started to monitor it during February 24 while it was located about 315 km (195 mi) to the northeast of Avarua.[5][19] During that day the system continued to develop further as it moved towards the southwest and out of RSMC Nadi's area of responsibility during February 25.[5] As it moved into TCWC Wellington's area of responsibility, the system developed into a category one tropical cyclone, but it was not named as it had developed into a tropical cyclone within the subtropics.[5][6]

After developing into a tropical cyclone the cyclone continued to intensify and develop further, before TCWC Wellington reported early on February 26 that the system had become a category 2 tropical cyclone.[5] The NPMOC subsequently started to issue warnings on the system and designated it as Tropical Cyclone 29P, while the cyclone was near its peak 1-minute sustained windspeeds of 85 km/h (50 mph).[7][19] Later that day after it had peaked, the cyclone started to transition into an extratropical cyclone, before the NPMOC issued its final advisory on the system during the next day as it weakened below tropical cyclone intensity.[5][7][15] The cyclone's remnants were subsequently last noted by TCWC Wellington during March 2, as it affected parts of New Zealand and caused flooding in Whangarei.[6][15]

Category 4 severe tropical cyclone (Australian scale)
Category 4 tropical cyclone (SSHWS)
Duration	March 3 – March 12
Peak intensity	185 km/h (115 mph) (10-min)  925 hPa (mbar)

Damages from the storm in Fiji amounted to $27 million.[20] Seven people were killed and 18 others were listed as missing due to Cyclone Gavin.[21]

Category 3 severe tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	March 12 – March 18
Peak intensity	120 km/h (75 mph) (10-min)  970 hPa (mbar)

On March 11, the FMS started to monitor a shallow depression, that had developed along the monsoon trough near Rotuma.[22] Over the next two days the depression remained near Rotuma with no preferred movement, as it started to develop further within favourable conditions for further development.[22][23] During March 13, the JTWC subsequently initiated advisories on the system and designated it as Tropical Cyclone 33P.[24] During that day the system continued its northwards movement until it curved eastwards and later south-eastwards during March 14, before it passed about 55 km (35 mi) to the southeast of Niulakita the southernmost island of Tuvalu.[22] Early on March 15, after the system had passed near Niulakita, the FMS reported that the depression had developed into a category 1 tropical cyclone and named it Hina.[22] After being named the system accelerated towards the south-southeast and an area of increasing vertical wind shear, as it passed near the west coast of Futuna Island.[22] The system also crossed the 180th meridian during that day, which prompted the JTWC to pass the responsibility for warning the United States Government to the NPMOC.[25][26]

Early on March 16, the FMS reported that based on satellite imagery and guidance from other meteorological centers, the system had 10-minute sustained wind speeds of 85 km/h (55 mph) as it passed over Southern Tonga.[22][27] Hina subsequently passed over the islands of Tongatapu and ʻEua in southern Tonga at around 0830 UTC and took less than 2 hours to inflict considerable damage on the islands.[1][22] The system subsequently emerged back into the South Pacific Ocean, with the FMS estimating that the system had storm force winds of about 95 km/h (60 mph).[22] Later that day the NPMOC estimated that Hina had peak 1-minute sustained windspeeds of 110 km/h (70 mph) as it rapidly moved below 25°S and out of the FMS's area of responsibility.[22][28] After impacting Tonga the system moved rapidly towards the south-southeast and weakened below tropical cyclone intensity, before it was last noted on March 21, to the south of the Pitcairn Islands.[1][15] During the systems post analysis it was determined that the warning centers had underestimated Hina's intensity as it passed over Tonga, after damage had been greater than expected in the island nation. the FMS subsequently deduced that Hina was a minimal category 3 severe tropical cyclone, with peak 10-minute sustained wind speeds of 120 km/h (75 mph) when it impacted Tonga.[22] The NPMOC also revised their estimate of Hina's peak 1-minute sustained wind speeds from 110 km/h (70 mph) to 140 km/h (85 mph) during post analysis, which made the system equivalent to a category one hurricane on the Saffir–Simpson hurricane wind scale.[7][28][29]

Cyclone Hina caused widespread damage in Tonga, leaving roughly $14.5 million in damages.[30] About 320 families were left homeless after the storm.[31]

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	April 13 – April 19
Peak intensity	85 km/h (50 mph) (10-min)  987 hPa (mbar)

On April 13, RSMC Nadi started to monitor a depression that had developed to the east of the Santa Cruz Islands. Over the next few days the depression slowly developed further before early on April 17 RSMC Nadi reported that the depression had become a category one tropical cyclone and named it Ian.

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	May 2 – May 5
Peak intensity	95 km/h (60 mph) (10-min)  985 hPa (mbar)

On April 30, RSMC Nadi started to monitor a weak area of low pressure that had developed to the northwest of the Fijian dependency of Rotuma.[32] Over the next couple of days, the system remained poorly organised under the influence of vertical wind shear, from the northwest as it moved slowly towards the south-southwest.[32][33] During May 2, subsequently initiated advisories on the system and designated it as Tropical Cyclone 35P, after the vertical wind shear surrounding the system, had relaxed and good outflow had developed aloft.[33][34] During that day the system started to move towards the south-southeast and rapidly developed before RSMC Nadi reported later that day, that the system had developed into a category 1 tropical cyclone and named it June.[1][32] At this stage the system was located about 600 km (375 mi) to the northwest of Nadi, Fiji, and was expected to turn towards the southwest and a break in the subtropical ridge of high pressure during the next day.[32][35] During May 3, the system continued to develop further and became slow moving, before it started to appear on radar imagery later that day.[32] RSMC Nadi subsequently reported early the next day that the system had peaked as a category 2 tropical cyclone, with 10-minute sustained wind speeds of 95 km/h (60 mph).[15] Later that day the JTWC reported that the system had peaked with 1-minute sustained wind speeds of 120 km/h (75 mph), which made June equivalent to a category 1 hurricane on the SSHWS.[36]

Severe flooding produced by the storm in Fiji left roughly $500,000 in damages.[37]

Category 3 severe tropical cyclone (FMS)
Category 4 tropical cyclone (SSHWS)
Duration	June 7 – June 17
Peak intensity	150 km/h (90 mph) (10-min)  955 hPa (mbar)

On June 10, RSMC Nadi reported that a tropical cyclone had developed near Tuvalu, out of a tropical depression that had existed since June 7, and named it Keli.[9][38] During that day the system

On February 18, a tropical depression formed to the northeast of Fiji and moved southwestwards, before it was last noted during the next day.[39] During May 26, the JTWC started monitoring a tropical disturbance that had developed to the southeast of the Solomon Islands, in response to strong westerly winds along the equator.[8][40] Over the next two days the disturbance gradually developed further, before the JTWC initiated advisories on the system and designated it as Tropical Cyclone 37P during May 28.[34] During the next day the system moved towards the south-southeast, before it peaked with 1-minute sustained wind speeds of 65 km/h (40 mph).[8] During May 30, the system dissipated as a significant tropical cyclone, after it had encountered cooler waters and stronger vertical windshear.[8][41]