Array programming

The fundamental idea behind array programming is that operations apply at once to an entire set of values. This makes it a high-level programming model as it allows the programmer to think and operate on whole aggregates of data, without having to resort to explicit loops of individual scalar operations.

Kenneth E. Iverson described the rationale behind array programming (actually referring to APL) as follows:[2]

most programming languages are decidedly inferior to mathematical notation and are little used as tools of thought in ways that would be considered significant by, say, an applied mathematician.

The thesis is that the advantages of executability and universality found in programming languages can be effectively combined, in a single coherent language, with the advantages offered by mathematical notation. it is important to distinguish the difficulty of describing and of learning a piece of notation from the difficulty of mastering its implications. For example, learning the rules for computing a matrix product is easy, but a mastery of its implications (such as its associativity, its distributivity over addition, and its ability to represent linear functions and geometric operations) is a different and much more difficult matter.

Indeed, the very suggestiveness of a notation may make it seem harder to learn because of the many properties it suggests for explorations.

[...]

Users of computers and programming languages are often concerned primarily with the efficiency of execution of algorithms, and might, therefore, summarily dismiss many of the algorithms presented here. Such dismissal would be short-sighted since a clear statement of an algorithm can usually be used as a basis from which one may easily derive a more efficient algorithm.

The basis behind array programming and thinking is to find and exploit the properties of data where individual elements are similar or adjacent. Unlike object orientation which implicitly breaks down data to its constituent parts (or scalar quantities), array orientation looks to group data and apply a uniform handling.

Function rank is an important concept to array programming languages in general, by analogy to tensor rank in mathematics: functions that operate on data may be classified by the number of dimensions they act on. Ordinary multiplication, for example, is a scalar ranked function because it operates on zero-dimensional data (individual numbers). The cross product operation is an example of a vector rank function because it operates on vectors, not scalars. Matrix multiplication is an example of a 2-rank function, because it operates on 2-dimensional objects (matrices). Collapse operators reduce the dimensionality of an input data array by one or more dimensions. For example, summing over elements collapses the input array by 1 dimension.

Array programming is very well suited to implicit parallelization; a topic of much research nowadays. Further, Intel and compatible CPUs developed and produced after 1997 contained various instruction set extensions, starting from MMX and continuing through SSSE3 and 3DNow!, which include rudimentary SIMD array capabilities. Array processing is distinct from parallel processing in that one physical processor performs operations on a group of items simultaneously while parallel processing aims to split a larger problem into smaller ones (MIMD) to be solved piecemeal by numerous processors. Processors with two or more cores are increasingly common today.

The canonical examples of array programming languages are Fortran, APL, and J. Others include: A+, Analytica, Chapel, IDL, Julia, K, Klong, Q, Mata, Wolfram Language, MATLAB, MOLSF, NumPy, GNU Octave, PDL, R, S-Lang, SAC, Nial, ZPL and TI-BASIC.

for (i = 0; i < n; i++)
    for (j = 0; j < n; j++)
        a[i][j] += b[i][j];

a = a + b

a(:,:) = a(:,:) + b(:,:)

A := A + B;

A ← A + B

A +← B

A := A + B;

DIM A(4),B(4),C(4)
MAT A = 1
MAT B = 2 * A
MAT C = A + B
MAT PRINT A,B,C

. mata:

: A = (1,2,3) \(4,5,6)

: A
       1   2   3
    +-------------+
  1 |  1   2   3  |
  2 |  4   5   6  |
    +-------------+

: B = (2..4) \(1..3)

: B
       1   2   3
    +-------------+
  1 |  2   3   4  |
  2 |  1   2   3  |
    +-------------+

: C = J(3,2,1)           // A 3 by 2 matrix of ones

: C
       1   2
    +---------+
  1 |  1   1  |
  2 |  1   1  |
  3 |  1   1  |
    +---------+

: D = A + B

: D
       1   2   3
    +-------------+
  1 |  3   5   7  |
  2 |  5   7   9  |
    +-------------+

: E = A*C

: E
        1    2
    +-----------+
  1 |   6    6  |
  2 |  15   15  |
    +-----------+

: F = A:*B

: F
        1    2    3
    +----------------+
  1 |   2    6   12  |
  2 |   4   10   18  |
    +----------------+

: G = E :+ 3

: G
        1    2
    +-----------+
  1 |   9    9  |
  2 |  18   18  |
    +-----------+

: H = F[(2\1), (1, 2)]    // Subscripting to get a submatrix of F and

:                         // switch row 1 and 2
: H
        1    2
    +-----------+
  1 |   4   10  |
  2 |   2    6  |
    +-----------+

: I = invsym(F'*F)        // Generalized inverse (F*F^(-1)F=F) of a

:                         // symmetric positive semi-definite matrix
: I
[symmetric]
                 1             2             3
    +-------------------------------------------+
  1 |            0                              |
  2 |            0          3.25                |
  3 |            0         -1.75   .9444444444  |
    +-------------------------------------------+

: end

A = A + B;

A += B;

a * b;

A(:)' * B(:);

SELECT A + B
FROM   A, B

> A <- matrix(1:6, nrow=2)                              !!this has nrow=2 ... and A has 2 rows
> A
     [,1] [,2] [,3]
[1,]    1    3    5
[2,]    2    4    6
> B <- t( matrix(6:1, nrow=2) )  # t() is a transpose operator                           !!this has nrow=2 ... and B has 3 rows --- a clear contradiction to the definition of A
> B
     [,1] [,2]
[1,]    6    5
[2,]    4    3
[3,]    2    1
> C <- A %*% B
> C
     [,1] [,2]
[1,]   28   19
[2,]   40   28
> D <- C + 1
> D
     [,1] [,2]
[1,]   29   20
[2,]   41   29
> D + c(1, 1)  # c() creates a vector
     [,1] [,2]
[1,]   30   21
[2,]   42   30

The matrix left-division operator concisely expresses some semantic properties of matrices. As in the scalar equivalent, if the (determinant of the) coefficient (matrix) A is not null then it is possible to solve the (vectorial) equation A * x = b by left-multiplying both sides by the inverse of A: A−1 (in both MATLAB and GNU Octave languages: A^-1). The following mathematical statements hold when A is a full rank square matrix:

A^-1 *(A * x)==A^-1 * (b)

(A^-1 * A)* x ==A^-1 * b       (matrix-multiplication associativity)

x = A^-1 * b

where == is the equivalence relational operator. The previous statements are also valid MATLAB expressions if the third one is executed before the others (numerical comparisons may be false because of round-off errors).

If the system is overdetermined - so that A has more rows than columns - the pseudoinverse A+ (in MATLAB and GNU Octave languages: pinv(A)) can replace the inverse A−1, as follows:

pinv(A) *(A * x)==pinv(A) * (b)

(pinv(A) * A)* x ==pinv(A) * b       (matrix-multiplication associativity)

x = pinv(A) * b

However, these solutions are neither the most concise ones (e.g. still remains the need to notationally differentiate overdetermined systems) nor the most computationally efficient. The latter point is easy to understand when considering again the scalar equivalent a * x = b, for which the solution x = a^-1 * b would require two operations instead of the more efficient x = b / a. The problem is that generally matrix multiplications are not commutative as the extension of the scalar solution to the matrix case would require:

(a * x)/ a ==b / a

(x * a)/ a ==b / a       (commutativity does not hold for matrices!)

x * (a / a)==b / a       (associativity also holds for matrices)

x = b / a

The MATLAB language introduces the left-division operator \ to maintain the essential part of the analogy with the scalar case, therefore simplifying the mathematical reasoning and preserving the conciseness:

A \ (A * x)==A \ b

(A \ A)* x ==A \ b       (associativity also holds for matrices, commutativity is no more required)

x = A \ b

This is not only an example of terse array programming from the coding point of view but also from the computational efficiency perspective, which in several array programming languages benefits from quite efficient linear algebra libraries such as ATLAS or LAPACK.[9][10]

Returning to the previous quotation of Iverson, the rationale behind it should now be evident:

it is important to distinguish the difficulty of describing and of learning a piece of notation from the difficulty of mastering its implications. For example, learning the rules for computing a matrix product is easy, but a mastery of its implications (such as its associativity, its distributivity over addition, and its ability to represent linear functions and geometric operations) is a different and much more difficult matter. Indeed, the very suggestiveness of a notation may make it seem harder to learn because of the many properties it suggests for explorations.

The use of specialized and efficient libraries to provide more terse abstractions is also common in other programming languages. In C++ several linear algebra libraries exploit the language's ability to overload operators. In some cases a very terse abstraction in those languages is explicitly influenced by the array programming paradigm, as the Armadillo and Blitz++ libraries do.[11][12]

• Array slicing
• List of array programming languages

• "No stinking loops" programming
• Discovering Array Languages
• what is Array