BR Engineering BR1

The BR Engineering BR1 is a sports prototype non-hybrid racing car built for the SMP Racing and DragonSpeed teams.[4] It is designed to meet the 2018 LMP1 regulations for Le Mans Prototypes in the FIA World Endurance Championship as well as at the 24 Hours of Le Mans. The BR1 debuted at the 2018 6 Hours of Spa-Francorchamps, the first round of the 2018-19 FIA World Endurance Championship.

BR Engineering BR1
CategoryLe Mans Prototype
(LMP1)
ConstructorBR Engineering / Dallara[1]
Designer(s)Luca Pignacca[2]
Technical specifications[3]
ChassisCarbon fibre composite monocoque
Suspension (front)Independent double wishbones with adjustable dampers
Suspension (rear)Independent double wishbones with adjustable dampers
EngineAER P60B 2.4 L V6 turbocharged
Gibson GL458 4.5 L V8 naturally aspirated
TransmissionX-Trac 6-speed sequential manual
TyresMichelin
Competition history
Notable entrants SMP Racing
DragonSpeed
Notable drivers Mikhail Aleshin
Jenson Button
Pietro Fittipaldi
Ben Hanley
Hendrik Hedman
Matevos Isaakyan
Egor Orudzhev
Vitaly Petrov
Stéphane Sarrazin
Renger van der Zande
Debut2018 6 Hours of Spa-Francorchamps
RacesWinsPolesF.Laps
3000
Teams' Championships0
Drivers' Championships0

Development

SMP Racing were participating in the European Le Mans Series in the LMP2 class, fielding a Dallara P217 chassis. In 2017, with the help of Dallara, BR Engineering and Russian university students designed and built a brand-new chassis, the BR1.[5] Mikhail Aleshin had an arm injury during the first test at Ciudad del Motor de Aragón due to car failure.[5] Prior the official launch at Bahrain the car was also tested by Kirill Ladygin, Vitaly Petrov, Viktor Shaytar and Sergey Sirotkin.[6]

Competition history

2018-19

For the 2018-19 super season, three BR1 chassis were entered; two by SMP Racing and one by DragonSpeed. The cars for the two teams differed by their engine choices; SMP utilizing AER-built P60B 2.4 litre V6 turbocharged engines and DragonSpeed utilizing the Gibson-made GL458 4.5 litre V8 naturally aspirated engine, the same engine used by Rebellion in their R13 prototypes.

The debut of the car at the 6 Hours of Spa-Francorchamps was overshadowed by a qualifying accident involving DragonSpeed's driver Pietro Fittipaldi, in which he sustained fractures to both legs. The car suffered from an electrical problem which caused the car to lose control and run straight into the wall whilst climbing Eau Rouge and could not be entered into the race.[7] SMP Racing also had technical issues with their #17 entry. Despite this, their #11 entry was able to finish fifth in qualifying.[8] Come race time, car #17 was involved in an accident at the top of Eau Rouge which sent it flipping through the air.[9] The #11 managed to finish 5th overall.

At Le Mans, DragonSpeed's #10 BR1 crashed at the exit of the Porsche curves with roughly 7:40:00 left in the race, retiring it from the event. The #17 also had an accident at the Porsche curves, severely damaging its rear. Matevos Isaakyan attempted to get it running again but the engine was damaged beyond repair, stopping the car again after rolling for a few meters. The #11 experienced technical issues earlier in the race but was able to rejoin later, finishing in 14th overall and 5th in-class.

At Silverstone, the #11 SMP Racing BR1 experienced an engine failure, retiring it from the race. However, due to both Toyota hybrids being disqualified, the #17 finished third overall behind both Rebellion R13s. Dragonspeed's #10 experienced technical issues, causing it to finish 25th overall but still 4th in-class.

At Fuji, SMP's #17 BR1 lost its front right wheel after it became dislodged. It also experienced technical issues and had to be towed off the circuit. Despite this, the #11 finished 4th overall. Dragonspeed's #10 also developed technical issues and had to be towed off the circuit.

Year Nat. Entrant Car No. Class Nat. Drivers Rds. Rounds Points WEP
pos.
1 2 3 4 5 6 7 8
2018-2019 Dragonspeed BR Engineering BR1-Gibson #10 LMP1


Henrik Hedman
Ben Hanley
Renger van der Zande
James Allen
2-3
2-4
2-3, 5
4-5
SPA LMN
DNF
SIL
4
FUJ
DNF
SHA
6
SEB SPA LMN 8.5 5th†

† Season in progress

References

  1. Goodwin, Graham (17 November 2016). "BR Engineering, Dallara & ART Grand Prix Combine For New For 2018 BR1 LMP1 L Programme". dailysportscar.com. Dailysportscar. Retrieved 20 May 2018.
  2. "New age of Russian motorsport as BR1 LMP1 is revealed for 2018/19 WEC". fiawec.com. FIA World Endurance Championship. 17 November 2017. Retrieved 20 May 2018. The presentation of BR1 was attended by many VIPs including Boris Rotenberg, founder and head of BR Engineering; Pierre Fillon, President of the ACO; Gérard Neveu, FIA WEC CEO; Luca Pignaca, Dallara chief designer; Dmitry Samorukov, SMP Racing CEO; and Russian motorsport development program SMP Racing drivers: Mikhail Aleshin, Vitaly Petrov and Matevos Isaakyan.
  3. "BR1". www.brengineering.ru. BR Engineering. Retrieved 20 May 2018.
  4. Smith, Luke (17 November 2017). "DragonSpeed Confirms BR1 Gibson for WEC". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.
  5. Dagys, John (23 November 2017). "Dallara-Built BR1 a "Completely New" Car". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.
  6. Smith, Luke (17 November 2017). "BR Engineering BR1 Unveiled". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.
  7. Dagys, John (4 May 2018). "Fittipaldi Airlifted to Hospital With Broken Legs". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.
  8. Dagys, John (4 May 2018). "Toyota Dominates Qualifying at Spa". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.
  9. Dagys, John (9 May 2018). "Video Emerges of Isaakyan's Wild Airborne Crash at Spa". sportscar365.com. John Dagys Media. Retrieved 20 May 2018.

Media related to BR Engineering BR1 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.