Indian locomotive class WAG-4

The Indian locomotive class WAG-4 is a class of 25 kV AC electric locomotives that was manufactured by CLW in the late 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) engine, 1st (1). A total of 186 WAG-4 locomotives were built by The European Group 50 Hz Group/European Group/50 Cycles Group (consortium) between 1967 and 1969. They entered service in 1967.[1]

WAG-4
Type and origin
Power typeElectric
BuilderCLW
Build date1963-1966
Total produced112
Specifications
Configuration:
  AARB-B
  UICB-B
Gauge5 ft 6 in (1,676 mm)
BogiesMonomotor B-B bogies
Wheel diameterNew:1,140 mm (3 ft 9 in)
Half worn: 1,120 mm (3 ft 8 in)
Full worn: 1,064 mm (3 ft 6 in)
Length14.600 m (47 ft 10 1316 in)
Width3.109 m (10 ft 2 1332 in)
Height4.165 m (13 ft 7 3132 in)
Axle load18,640 kg (41,090 lb)
Loco weight74,000 kg (163,000 lb)
Electric system/s25 kV 50 Hz AC AC Overhead
Current pickup(s)pantograph
Traction motorsSiemens/ACEC/Alstom MG 710A (740hp, 1250V, 480A, 1000 rpm).Fully suspended, force- ventilated.
Loco brakeAir
Train brakesvacuum train brakes.
Performance figures
Maximum speed112 km/h (70 mph)
Power outputMAX:2930HP Continuous: 2,930 hp (2,185 kW)
Tractive effortStarting : 25,000 kgf (250 kN; 55,000 lbf)
Career
OperatorsIndian Railways
Numbers20700-20709 (Niv. / SFAC) 20710-20791 (CLW) 20849-20868 (Niv. / SFAC)
LocaleAll over India
DispositionRetired

The WAG-4 served both passenger and freight trains for over 40 years. As of January 2020, All locomotives have been removed from service all but one were scrapped.

History

The first fifty-six locomotive's equipment were procured from European Group. They had Auxiliary machines and some control equipments have been procured from indigenous sources. All these locomotives were built by CLW. The typical feature of these locomotives is Monomotor Bogie. This construction results in substantial saving in weight in traction equipment and gives better adhesion. These locomotives utilise silicon rectifiers for conversion of ac power into dc. The traction motors are force ventilated and are fully suspended type. These motors are permanently grouped in parallel and speed control is obtained through HT tap changer and TM field weakening.

These locomotives can be used for a multiple unit operation to a maximum of four locomotives with compressed air brake for the loco and vacuum brake for the train are provided. In addition, these locomotives are also provided with rheostatic braking. Few locomotives have been converted to dual brake system later on by Railways.

Specification

  • Build dates: 1966-71
  • Wheel arrangement: B-B ( monomotor bogies like WAG 1 )
  • Traction Motors: ACEC make, MG 1580 A1 (1160 kW, 1270 V, 1040 A, 690 rpm, weight 5850 kg). Fully suspended, bogie-mounted.
  • Gear Ratio: 3.95 : 1
  • Transformer: Oerlikon BOT 3460. 32 taps.
  • Rectifiers: Two GL 82220 silicon rectifiers, 1000 A / 1270 kW/1270 V. Weight 650 kg each.
  • Axle Load: 21.9 t
  • Hauling capacity: 2000 t

Manufacturer:Chittaranjan Locomotive Works ( CLW )

Variants
  • WAG-4D (D stands for Dual braking ie it can haul both vacuum and air brake stock wagons)

Locomotive shed

  • All the locomotives of this class has been withdrawn from service.

See also

References

    1. https://www.irfca.org/faq/faq-specs.html#WAG-4 [IRFCA] Indian Railways FAQ: Diesel and Electric Locomotive Specifications
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.