LNER Class Y10

The LNER Class Y10 was a class of two 0-4-0T geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced in 1930.[1] The LNER numbered them 8403 and 8404 but they were later re-numbered 8186 and 8187. This was the second use of the classification Y10 by the LNER. The first was for an ex-North British Railway 0-4-0 steam tender locomotive, withdrawn 1925.[2]

LNER Class Y10
Model of a Y10
Type and origin
Power typeSteam
DesignerSentinel Waggon Works
BuilderSentinel Waggon Works
Build date1930
Total produced2 (for LNER)
Specifications
Configuration:
  Whyte0-4-0T
Gauge4 ft 8 12 in (1,435 mm)
Driver dia.3 ft 2 in (0.965 m)
Wheelbase6 ft 0 in (1.83 m)
Length23 ft 2 14 in (7.07 m) over buffers
Axle load12.30 long tons (12.50 t; 13.78 short tons)
Loco weight23.95 long tons (24.33 t; 26.82 short tons)
Fuel typeCoal
Fuel capacity12 long hundredweight (610 kg; 1,300 lb)
Water cap600 imp gal (2,700 l; 720 US gal)
Firebox:
  Firegrate area
6.5 sq ft (0.60 m2)
Boiler pressure275 psi (1.90 MPa) water tube boiler
Heating surface159.0 sq ft (14.77 m2)
  Firebox51.0 sq ft (4.74 m2)
Superheater:
  Heating area40.0 sq ft (3.72 m2)
CylindersFour
Cylinder size6 34 in × 9 in (171 mm × 229 mm)
Valve typeRotary cam & poppet valves
Performance figures
Tractive effortsee text
Career
Operators
Axle load classRA 1
Withdrawn1948, 1952
DispositionBoth scrapped

Both the Sentinels passed into British Railways ownership in 1948 but 8187 was withdrawn almost immediately. Number 8186 was allocated the BR number 68186, but never actually carried it, and was withdrawn in 1952.[3]

Power unit

The superheated vertical water-tube boiler and the motor were similar to those used in Sentinel steam wagons. Each locomotive had two 2-cylinder engines, giving a total of 200 horsepower (150 kW). The engines had poppet valves and reversing was by sliding camshaft. The advantage of the water-tube boiler was that steam could be raised much more quickly than with a conventional fire-tube boiler.

Transmission

Final drive to the wheels was by sprocket and chain. There was a two-speed gearbox but gears could only be changed while the locomotive was stationary. Tractive effort was:

  • Low gear 11,435 lbf (50.87 kN)
  • High gear 7,965 lbf (35.43 kN)

Usage

These locomotives were intended for service on the Wisbech and Upwell Tramway and had several tram engine features. These included cowcatchers and sideplates and a cab at each end, similar to the GER Class C53 locomotives which already worked on the line.

They were not a great success on the Wisbech and Upwell and both were moved to Yarmouth in May 1931 to work the quayside line.

References

  1. Ian Allan ABC of British Railways Locomotives, 1948 edition, part 4, page 47
  2. http://www.lner.info/locos/Y/y10wheatley.shtml
  3. http://www.lner.info/locos/Y/y10.shtml
  • Boddy, M. G.; Brown, W. A.; Fry, E. V.; Hennigan, W.; Hoole, Ken; Manners, F.; Neve, E.; Platt, E. N. T.; Proud, P.; Yeadon, W. B. (June 1977). Fry, E. V. (ed.). Locomotives of the L.N.E.R., Part 9B: Tank Engines—Classes Q1 to Z5. Kenilworth: RCTS. pp. 108–109. ISBN 0-901115-41-X.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.