Loop (music)

• "Loops are short sections of tracks (probably between one and four bars in length), which you believe might work being repeated." A loop is not "any sample, but...specifically a small section of sound that's repeated continuously." Contrast with a one-shot sample (Duffell 2005, p. 14).
• "A loop is a sample of a performance that has been edited to repeat seamlessly when the audio file is played end to end" (Hawkins 2004, p. 10).
• "A drum loop is technically a short recording of multiple drum materials which has been edited to loop seamlessly ( to loop smoothly and continuously), a drum loop repeats until an exact duration is satisfied, for example, to break a single loop to another, you might want to use a drum fill which could also be a seamless loop" (Horlaes 2018).

While repetition is used in the musics of all cultures, the first musicians to use loops, as early as 1944, were electroacoustic music pioneers such as Pierre Schaeffer, Halim El-Dabh (Holmes 2008, p. 154), Pierre Henry, Edgard Varèse and Karlheinz Stockhausen (Decroupet and Ungeheuer 1998, pp. 110, 118–119, 126). In turn, El-Dabh's music influenced Frank Zappa's use of tape loops in the mid-1960s (Holmes 2008, pp. 153–154).

Terry Riley is a seminal composer and performer of loop- and ostinato-based music who began using tape loops in 1960. For his 1963 piece Music for The Gift he devised a hardware looper that he named the Time Lag Accumulator, consisting of two tape recorders linked together, which he used to loop and manipulate trumpet player Chet Baker and his band. His 1964 composition In C, an early example of what would later be called minimalism, consists of 53 repeated melodic phrases (loops) performed live by an ensemble. "Poppy Nogood and the Phantom Band", the B-side of his influential 1969 album A Rainbow in Curved Air uses tape loops of his electric organ and soprano saxophone to create electronic music that contains surprises as well as hypnotic repetition.

Another influential use of tape loops was Jamaican dub music in the 1960s. Dub producer King Tubby used tape loops in his productions, while improvising with homemade delay units. Another dub producer, Sylvan Morris, developed a slapback echo effect by using both mechanical and handmade tape loops. These techniques were later adopted by hip hop musicians in the 1970s (Veal 2007, pp. 187–188). Grandmaster Flash's turntablism is an early example in hip hop.

The use of pre-recorded, digitally-sampled loops in popular music dates back to Japanese electronic music band Yellow Magic Orchestra (Condry 2006, p. 60), who released one of the first albums to feature mostly samples and loops, 1981's Technodelic (Carter 2011). Their approach to sampling was a precursor to the contemporary approach of constructing music by cutting fragments of sounds and looping them using computer technology (Condry 2006, p. 60). The album was produced using Toshiba-EMI's LMD-649 digital PCM sampler, which engineer Kenji Murata custom-built for YMO (Anon. 2011, 140–141).

Ditto looper pedal

Today, many musicians use digital hardware and software devices to create and modify loops, often in conjunction with various electronic musical effects. A loop can be created by a looper pedal, a device which records the signal from a guitar or other audio source and then plays the recorded passage over and over again (Equipboard staff 2018).

In the early 1990s, dedicated digital devices were invented specifically for use in live looping, i.e. loops that are recorded in front of a live audience.

Many hardware loopers exist, some in rack unit form, but primarily as effect pedals. The discontinued Lexicon JamMan, Gibson Echoplex Digital Pro, Electrix Repeater, and Looperlative LP1 are 19" rack units. The Boomerang "Rang III" Phrase Sampler, DigiTech JamMan (Ross 2010), Boss RC-300 and the Electro-Harmonix 2880 are examples of popular pedals. As of December 2015, the following pedals are currently in production: TC Ditto, TC Ditto X2, TC Ditto Mic, TC Ditto Stereo, Boss RC-1, Boss RC-3, Boss RC-30, Boss RC-300 and Boss RC-505 (Anon. n.d.).

The musical loop is one of the most important features of video game music. It is also the guiding principle behind devices like the several Chinese Buddhist music boxes that loop chanting of mantras, which in turn were the inspiration of the Buddha machine, an ambient-music generating device. The Jan Linton album "Buddha Machine Music" used these loops along with others created by manually scrolling through C.D.s on a CDJ player (Entropy Records 2011).

• Phase music

• Baumgärtel, Tilman (2015). Schleifen. Zur Geschichte und Ästhetik des Loops. Berlin: Kulturverlag Kadmos. ISBN 978-3-86599-271-0. Retrieved 11 July 2015.

• Music loops at Curlie