Multibeam Corporation

Multibeam is an American corporation that engages in the design of semiconductor processing equipment used in the fabrication of integrated circuits. Based in Santa Clara, in the Silicon Valley, Multibeam is led by Dr. David K. Lam, the founder and first CEO of Lam Research.

Multibeam Corporation
IndustrySemiconductor industry
Founded2010 (2010)
HeadquartersSanta Clara, California
Key people
David K. Lam (Chairman)
ProductsE-beam lithography systems for the semiconductor industry
Websitehttp://www.multibeamcorp.com

Technology

Multibeam developed miniature, all-electrostatic columns for e-beam lithography. Arrays of e-beam columns operate simultaneously and in parallel to increase wafer processing speed. With 36 patents filed,[1] Multibeam develops multicolumn e-beam systems and platforms for four major applications: Complementary E-Beam Lithography (CEBL), Direct Electron Writing (DEW), Direct Deposition/Etch (DDE), and E-Beam Inspection (EBI).[1]

Applications
  • Direct Electron Writing (DEW) embeds security information in each IC including chip ID, IP or MAC address, and chip-specific information such as keys used in encryption. Chip ID is used for supply chain traceability and to detect counterfeits. Hardware-embedded encryption keys are used to authenticate software. Chip-specific information written into DEW-bit registers is non-volatile.[2][3]
  • Complementary Electron Beam Lithography (CEBL) works with optical lithography to pattern cuts (of lines in "lines-and-cuts" layout)[4] and holes (i.e., contacts and vias) with no masks.[5][6][7][8]
  • Direct Deposition/Etch (DDE) can be used in chip fabrication or wafer defect repair. Precursors or reactants are introduced through gas injectors. Activation electrons are directed in accordance with the design layout database to deposit or remove material at precise locations on the substrate.[1][9][10]
  • Multi-column Electron Beam Inspection (EBI) for wafer defect detection and metrology.[11][12][13]

References
  1. "Multibeam Patents Direct Deposition & Direct Etch". Solid State Technology. November 14, 2016.
  2. "Securing Chips During Manufacturing". Semiconductor Engineering. July 7, 2016.
  3. "Tech Talk". eBeam Initiative. October 2016.
  4. "1D design style implications for mask making and CEBL". SPIE. September 9, 2013.
  5. "From the White Board". eBeam Initiative. June 2014.
  6. "Multiple columns for high-throughput complementary e-beam lithography (CEBL)". SPIE. March 21, 2012.
  7. "E-beam to complement optical lithography for 1D layouts". SPIE. April 4, 2011.
  8. "E-beam direct write (EBDW) as complementary lithography". SPIE. September 29, 2010.
  9. "Precision deposition using miniature-column charged particle beam arrays". September 27, 2016.
  10. "Precision substrate material removal using miniature-column charged particle beam arrays". October 11, 2016.
  11. "Charged particle beam substrate inspection using both vector and raster scanning". October 11, 2016.
  12. "Matched multiple charged particle beam systems for lithographic patterning, inspection, and accelerated yield ramp". April 7, 2015.
  13. "Multiple column high-throughput e-beam inspection (EBI)". SPIE. April 5, 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.