Paxman Ventura

Like its medium-speed predecessor the Paxman YH, the Ventura is a 60° V engine with either 12 or 16 cylinders. The engines are similar in many details and broadly similar in capacity and power; their main differences are in their operating speed, the improvements necessary to achieve this, and the Ventura's resulting lighter weight.

The crankcase / cylinder block for MOD Vessels were fabricated from steel by welding a mixture of steel castings and platework This gives a more rigid structure than the YH's cast light alloy block. The aluminium frame of the YH and ZH engines had previously given trouble with cracking and had to be replaced in the Class 17 with a cast iron frame, at Paxman's expense.[4] Both engines have individual aluminium cylinder heads for each cylinder.. All other applications had cast iron crankcase / cylinder block. [3] Centrifugally cast iron wet cylinder liners are used with aluminium pistons in both.[1] These pistons have three compression rings and two oil-control rings. The top ring is carried in a cast iron insert. The combustion chamber of this direct injection engine is a toroidal recess in the piston crown.[1]

The YJ engines were primarily developed for diesel electric locomotives (however Paxmans main design philosophy was maximum power for a given size and weight) and so their crankshafts have the unusual feature of an additional main bearing at the drive end, to help support the weight of the generator armature, where a single-bearing generator can be otherwise unsupported at one end.[1]

Fork and blade connecting rods are used, with the inner rod running on the outside of a shared bearing sleeve.[1]

There are four valves per cylinder, driven by pushrods and rockers from a single camshaft between the cylinder banks. The fuel injector is centrally mounted between the valves, and is supplied by a pair of inline fuel injection pumps, one per bank.[1]

The single turbocharger is carried above the engine, with its axis longitudinal.[1]

Smaller, single bank six- and eight-cylinder engines, the 6YJ and 8YJ, were derived from the V engine.[5]

Paxman licensed the Ventura design to ALCO, with a reciprocal agreement also permitting Paxman to build the popular ALCO 251.[2] As an indication of the high power / weight ratio of the Ventura, this was around three times that of the 251.[2]

12YJ

• Class 29, re-engining of the licence-built MAN engines in the NBL Type 2 (Class 21) diesel-electrics.
• Class 42, two units fitted from new to D830 Majestic for comparison trials. Units rated at 1200 BHp and allied to normal Class 42 spec Mekydro transmissions.

6YJ

• Class 14 [6]
• Class 74

16YJ

• Ceylon Government Railways, 15 supplied (14 locos, +1 spare) 1,580 hp[7]
• Hungarian State Railways, single engine supplied for trials 1,870 hp[2][7]
• Type 42 destroyer, as a set of four generator sets, each rated at 1 MW.