Reciprocating saw

A reciprocating saw is a type of machine-powered saw in which the cutting action is achieved through a push-and-pull ("reciprocating") motion of the blade.

Example of a variable-speed, reciprocating saw
Reciprocating saw at the Roscheider Hof Open Air Museum
Reciprocating saws have many uses; here one is shown cutting through hard-to-remove nails in a staircase

The term is commonly applied to a type of saw used in construction and demolition work. This type of saw, also known as a hognose or recip saw, has a large blade resembling that of a jigsaw and a handle oriented to allow the saw to be used comfortably on vertical surfaces. The typical design of this saw has a foot at the base of the blade, similar to that of a jigsaw. The user holds or rests this foot on the surface being cut so that the tendency of the blade to push away from or pull towards the cut as the blade travels through its movement can be countered.

Design

Designs range widely in power, speed, and features, from less powerful portable, handheld models that are usually shaped like a cordless drill, to high-power, high-speed, corded models designed for heavy construction and demolition work. Modern reciprocating saws almost all have variable speed, either through trigger sensitivity or through a dial. Another feature that has become important to the way these saws are used is the inclusion of an orbital action. This action consists of oscillating the traversed reciprocation in up and down fashion (perpendicular to the motion of cut) causing the tip of the blade to move in an oval pattern, up and down as well as back and forth. This feature is primarily for wood, allowing quick cuts.

A reciprocating saw is a popular tool used by many window fitters, construction workers and emergency rescue services. Variants and accessories are available for specialized uses, such as clamps and long blades for cutting large pipe.[1][2]

Blades are available for a variety of materials and uses. Common types include metal cutting blades, wood cutting blades, blades for composites, for drywall, and other materials. Many of these blade types have a variety of tooth designs intended for special purposes, such as tree-limb cutting, demolition work, clean cutting, or contaminated materials. Abrasive coated blades are also available for hard materials like tile and stone.[3]

The term reciprocating saw (also oscillating saw) is also applied generically to any saw which cuts with a back and forth motion. These include:

Powered reciprocating tools are also found in surgery and dental surgery, where they are used in operations that require cutting or grinding of bone.

Mechanism

Operation of reciprocating saw swashplate mechanism

The reciprocating action may be produced in several ways. A crank[4] or Scotch yoke type drive may be used, a swashplate[5] type drive, a captive cam or eccentric, barrel cam,[6] or other rotary to linear drive. Modern tools are built with variants of all of these mechanisms. Eccentric cam, crank and scotch yoke drives need balance weights to reduce vibration in the plane of the rotating element, and may still exhibit vibration that is objectionable to a user of a handheld saw and can lead to difficulty in controlling a cut. The swash plate drive has the advantage that there is little rotational out of balance, so the principal vibration is in line with the blade. This is generally controllable by keeping the foot of a handheld tool against the work.

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.